GPS Car Antenna GPS Antennas:GPS Ct-6180 Car GPS Antenna vehicle antenna:GPS Ct-6180
1.0 CONFIGURATION
1.1
RF Cable
RG174 , ψ2.7 ± 0.3mm , Black
Cable Length
5m ± 5cm
1.2
RF Connector
SMA(M)
This antenna system consists of two functional blocks, the LNA portion and the patch antenna.
3.0 GENERAL
3.1 ENVIRONMENTAL CONDITIONS
3.1.1
Operation Temperature
-30 to + 80
3.1.2
Storage Temperatur
-40 to + 100
3.1.3
Relative Humidity
40% to 95%
3.2.1
Input Voltage
Min:2.5V Max:5.5V
3.2.2
Power Consumption
At 3.0 V
Typ: 13mA. Max: 16mA.
At 5.0 V
Typ: 18mA. Max: 22mA.
3.3 MECHANICAL SPECIFICATIONS
3.3.1
3.4 Mounting
Magnet mount.
3.3.2
Horizontal Pulling Force of Magnet
1.5 Kg Min.
3.3.3
Water Proof
Deep into water 50cm, 30 Min.
3.3.4
Shock
10msec. Half sine wave.
3.3.5
Vibration
10~200Hz Log. Sweep 3.0G
sweep time: 15 Minutes, 3 Axes.
3.3.6
Magnet Threshold
The antenna must stay atlached to the vehicle, at a speed of 180 km/h.
3.3.7
Cable Pulling Off Force
3.5Min At room temperature Min 7Kg /10sec.
Apply 7Kg /10sec pulling force between the cable and the antenna unit,no visible damage shall appear on the cable and connector.
3.3.8
Bending Test
After bending 908 right and left for 1,000 cycles, no permanent damage were found.
3.3.9
Weight
105g Max.
4.1
Frequency Range
1575.42 ± 1.023 MHz.
4.2
Gain
90° : 2.0 dBi Min.
20° : -5.0 dBi Min.
Mounted on the 60mm*60mm ground plane.
4.3
Polarization
RHCP
4.4
Axial Ratio
90° : Max 3.0dB
5.1
1575.42 ± 1.023 MHz
5.2
28 ± 4.5dB ( + 25 ± 5)
5.3
Noise Figure
1.5 dB Max. ( +25 ± 5)
2.2 dB Max. ( +85 )
5.4
Out Band Rejection
fo = 1575.42MHz
fo ± 20 MHz 7dB MIN
fo ± 30 MHz 12dB MIN
fo ± 50 MHz 20dB MIN
fo ± 100 MHz 30dB MIN
5.5
Output Impedance
50Ω
5.6
Output VSWR
2.0 Max
6.1
1575.42 ± 1.023MHz
6.2
At 90° 30 ± 4.5dBi (cable loss) Note:1
mounted on the the 60mm*60m ground plane
6.3
6.4
VSWR
Dynamic /static Axle weighing system, wheel weighing system, weighing pad, vehicle weighing system
Features
1. multiple load cells are inside weigh pad, an integrated and ultra-slim structure, easy for move, with light weight less than 20kg. 2. With special protection treatment, suitable for harsh environment. 3. patented designed slope can lower force impact from vehicle wheels.
Application
1. weighing and load control of loading truck in road transportation, construction, agriculture, forestry, and dustbin disposal. 2. weighing of loading truck by executive enforcement units. 3. test weight and center of gravity of aero-plane. 4. weighing automobile wheel and axle load distribution in automobile production line. 5. stability test of special automobile, such as fork-lift truck, crane.
Specification
1. Axle weighing range: 0～40t 2. Double LCD display: Axle weight display: 0～99995kg Total weight display:0～999995kg Display unit height: 13mm 3. Accuracy: Static: ≤20%F.S ±0.3%F.S &nb sp; >20%F.S ±0.5%F.S Dynamic: ≤20%F.S ±1%F.S &nb sp; &nbs p; >20%F.S ±3%F.S 4. Vehicle velocity: 3～5km/h 5. Use temperature: -10～60℃ 6. Relative humidity: <90%
We are sincere to establish long and close relationship with all of the world and welcome any inquiry.
contacter :Lina
Phone:0086- 510-88056151
FAX:0086-51 0-88056151
Email:svloa dcell@hotmail.com
HTTP://www. load-cell.com.cn
The ET2000 is a GPS/GSM vehicle tracking system. It uses the latest SiRF III GPS module and Siemens GSM module. It is an idea design not only for GPS real time tracking, but also a complete GSM alarm controllable by user\'s mobile phone message as well as the RF transmitters. We offer an all-in-one GPS tracking solution, with the tracking software and maps.
This device works with Extremtrac PC based tracking software that works with Microsoft MapPoint map and Google Earth map, it can track up to 200 units in real time. We offer the complete solution, so that users can build up an imdependant GPS monitoring station. For more informatin about the software and maps, please go to our solution for details.
