Ionized Air gun is a hand-held ionizing air gun for neutralization static charge and removing dust contamination of industrial applications. Air gun separates air molecules into positive and negative ions by means of electric field, then generates and transports them. Due to high-technologically design it is possible to produce more efficient results for static electric troubles even in high=speed applications. It provides high performance and efficient ionization with fast discharging time.
Anti-static air gun separates the air molecules to positive and negative ions. Due to principle of work of anti-static air gun the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. In addition, such electrical dangers as current striking, explosion, fire and dust attraction will be also prevented. Anti-static air gun does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life.
Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical shock. Air passing trough anti-static air gun must be clean and dry. Due to being ergonomic and lightweight anti-static air gun supplies soft and effective work.
Rapid decay times / Ergonomic design / Easy in use
Moulding / Optics / Automobile parts / Screen printing / Plastic sheets / Electronic assemblies / Pre-paint decontamination / Cleaning and neutralization 3-D / Lens cleaning / Furniture finishing / Package cleaning
Due to high technologically design used in Anti-static bar it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Anti-static bar do not need any calibration and can be cleaned and cared easily. It was designed to neutralize destructive static charges during manufacturing. Using Anti-static bar will supply machines to perform hygienic, safe and qualitative production. Anti-static bar can be designed in different lengths to satisfy the requirements of needs of application.
Antistatic bar separates the air molecules to positive and negative ions. Due to principle of work of antistatic bar the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire, dust attraction will be also prevented. Anti-static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life.
Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. It can be installed in restricted places. According to application it can be produced in different length.
Easy to install / High performance / Safety / Long life
Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
High voltage distributors are designed to make easy connection in high voltage applications. The new devices are available as 1 in 1out, 1 in 2 out, 1 in 4 out, with and without resistor. It became possible to work with many electrostatic products at the same time and there is no risk to be exposed to high voltage current any more.
Installation of High Voltage Distributor is very easy. Fix the HV Connectors to output of the Static Generator. After that each port of Connector will be ready to be connected to output of Multi Power Distributor.
Variations of product
- 1 in 1 out without resistant
- 1 in 2 out without resistant
- 1 in 4 out without resistant
- 1 in 1 out with resistant 40 mohm.
- 1 in 2 out with resistant 40 mohm.
- 1 in 4 out with resistant 40 mohm.
- 1 in 1 out with resistant 80 mohm.
- 1 in 2 out with resistant 80 mohm.
- 1 in 2 out with resistant 80 mohm.
It is necessary to have the tag to fit the mould while the production of In-Moulding applications is in process. Due to the high performance of the 5 PIN IML titanium needles, the tag gets glued to the mould without problems. The static electricity being loaded on the tag due to the 5 PIN IML titanium needles provides perfect loading on the tag surface and especially on the head without causing any distortion or trail.
High Tension Strength (IML Foam) used on the front face of static loading apparatuses is produced only by PULS ELECTRONIC and is applied in its own devices as well as presented to other users occupied with the same area. Given below porper utilization of the IML Foam supplies a long-time work without causing any problem.
General Areas of Use
- In IML (In-Mould Labeling) Robots,
- In-Mould process loaded manually
- Any kind of label loading process that can be loaded statically
Puls Perforation Detector is used to detect perforation on any material in packaging industry. Especially it is useful in bag making machinery to count the bag numbers by detecting and reporting the perforation. Its detection capacity is 900 pcs/min. Output voltage can be adjusted between 6kV-21 kV by rotating and fixing the knob on the front panel. The leds on the front panel show the high voltage level. If perforation is detected, the count led flashes. The high voltage bar or probe with one emitter pin is connected to the output of the equipment and it is mounted above the web moving on grounded surface. If a spark occurs from the high voltage bar to the earth via perforation, detector will report it by a 30 msn opto coupler pulse output.
Easy to install / Long life / Low cost
Counting at bag making machine / Capillary leak detection in plastic tubes / Hole detection on silt thermophore / Hole detection on plastic cups and bottles / Leak detection on plastic materials
Puls Charging Bar device is utilized in industry for sticking materials to any surface or to each other. The sticking should be without any defects so then the materials are being unstuck, they should not damage the surface of the material. By utilizing Puls Charging Bar high resistant materials such as paper or plastic now can be easily clamped to surface. By using ionization system electrostatic charging generates the charger system by means of static generator and charging bar.
Charging bar is also designed to use charging in some quantity. Due to resistant connection to high voltage it does not emit a spark and enhances safety of work. Power supply voltage should be adjusted according to positive and negative polarity of charging bar. In sticking application charging bar should keep the distance to being charged materials in 10-20 mm.
Puls charging bar has an aperture behind, which by putting inside of it a plastic bar with M8 x 60 size, supplies simple and safe installation to any machine. To make static charge and sticking applications work properly it is necessary by using the most proper ionizing system to provide neutralization before two materials would be stuck to each other.(see Puls Static Elimination)
Easy to install / Resistively coupled / Spark-free
In mould labelling (IML) / Bags on roll / DVD manufacture / Board laminating / Compensating stackers / Film winding to roll cores / Flat bag with gusset / Multi sheet feeders / Side weld bag handles / Shrink wrapping / Electrostatic bonding
To analyze and solve the static troubles without measuring the charge is very complicated. So utilization of static meter will be a good decision for technical personnel to solve troubles caused by static electricity. Static meter shows amplitude and polarity of static electricity and where and how it was generated. It is quick to expose positive and negative loads up to 160.000 Volts. If to solve trouble the static eliminator is needed, static meter will rate the most appropriate position for static eliminator and show its performance. Static meter forms standards due to that would be solved future static troubles and enhanced work of technical personnel. These standards are varied from charging level of dangerous areas to charging level of ordered, produced or sent to client product. Its accuracy, stability of easement in use and convenient size of device make Puls static meter an ideal instrument for engineers.
- Rapid and simple in use
- Compact design
- LCD display
ET-2B North-seeker mainly constitutes by a high accuracy tuning gyro of biaxial power and two accelerometers. By measuring X Y axis weight of the Earth\'s rotation speed, determines the true north. It is insensitive to magnetic fields and other environmental factors. Combine with the two axial accelerometers, can measure and calibrate the tilt angle
Current &nb sp;
Tilt angle range
Tilt angle accuracy
Tilt angle resolution
Tilt angle digital show
Azimuth digital show
North Finding time
Weight &nbs p;
Shock & nbsp;
2.Output data format
Digital output RS232< /span>
Baud rate &nb sp; 9600
Data format 1 start, 8date, 1 stop, no parity
Y tilt angle
X tilt angle
CRYSTAL st1:place> CLEAR
LCD & OPTICAL LENS CLEANER
Soft & clear as water cleaning formula for cleaning soils and finger prints on LCD screens, optical lenses, eyeglasses, computer discs & heads, TVs, plasma TVs, CDs, VCDs, DVDs, etc.
Multipurpose: can also be used for cleaning casings of electronic equipment made from glass, plastic, rubber, leather, metal, fiber - leaves no stain.
Environmentally friendly formula, non-toxic.
Anti-bacterial cleaner: effectively stops spreading of germs.
Anti-static: resists finger printing, reduces surface abrasions & extends LCD screen life.
FREE from: Ammonia, acetone, ethyl alcohol, toluene, ethyl acid, methyl chloride.
How to use:
1. Turn the monitor off.
2. Spray CRYSTAL CLEAR LCD & OPTICAL LENS CLEANER on a micro-fiber cloth (never spray liquid directly onto the LCD screen).
3. Gently move the wet cloth in just one direction - eg. from top to bottom.
Packaging< /b>: Bottle spray 60 mL
The NEO HEALTH 9000 generates high voltage potential difference to make an indirect effect on a human body. In other words, a thick negative ion layer is made around the human body, and this reaction uses minerals in blood to prevent acidification and maintain alkalinity of blood, helping prevention of all kinds of diseases.
The driving force of human life is biological electricity contained in a human body. The biological electricity of the cells in a human body controls the daily activities such as thinking, talking, moving, digesting foods, and coping with diseases. This biological electricity, however, decreases with the age of a person. In particular, irregular life styles of modern people, a variety of pollutants and stress, and acidified foods further weaken the biological electricity. The reduction of biological electricity lowers the activity of cells, accordingly resulting in weaker immunity.
NEO HEALTH 9000 applies the electric field to your body, helping you enjoy healthier life.
If you need this equipment, please contact me, I will offer you our best price.
Beijing Daxiang New Material and Technology Co.
Contact: Annie Li