Add New Product | My Products | Free Product Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "silicone rubber"
advertisements
Liquid Pad Printing Silicone Rubber Material Liquid Pad Printing Silicone Rubber Material

Applications of liquid pad printing silicone rubber

Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier

which transfer patterns on the steel plate to the toys products surface.

Features of liquid pad printing silicone rubber

a. resistance to deformation, high-temperature

b. high printing times

c. good aging resistance

d. exceptional elasticity

e. great printing effect

Operation Instructions of liquid pad printing silicone rubber

Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or

100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.

Technical datasheet of liquid pad printing silicone rubber

Model

Appearance

Viscosity (cs)

Hardness (Ao)

Tensile Strength (kgf/c)

Tear Strength (kgf/cm)

Shrinkage (%)

Elongation (%)

Mixing Ratio(%)

Operating Time(H)

Curing Time(H)

HY-918

White

18000~20000

22~24

≥32

≥20

≤0.3

≥500

2~3

0.5

2~4

Model

Color

Mixing ratio (%)

Pot life (mins)

Demould time (hrs)

Hardness(A0)

Tensile-stength  (N/m2)

Tear-strength (N/mm)

Viscosity (cps)

Elongation (%)

HY- 928

red

9:1

30

4±1

30

5.5

27

17000-20000

500

Package:20kg/drum, 25kg/drum and 200kg/drum

Price:8~20usd/kg.(contact me for details)

Specific parameters, price and delivery details, etc. welcome to call!

If you are interested in our production, or any questions of our production , pls feel free to contact us by email!(Email:hyhl@szrl.net)

Michael

Tel: +86 -18938867553

Mob/Whatsapp: +86-18938867553

QQ: 2355542520

E-mail:hyhl@szrl.net 

Wechat:hyhl-Michael168168

S kype:hyhl@szrl.net/Michael Kenneath

Facebook:+8618938867553/Michael Kenneath

Website: http://www.szrl.net

[Related Categories: Chemicals ]
[Related Keywords: Silicone, rubber, silicone rubber ]
Platinum Cure Silicone Foams Platinum Cure Silicone Foams

Description of Platinum Cure Silicone Foams

Platinum Cure Silicone Foams is a soft, two-component platinum silicone flexible foam that is versatile and easy to use. HY-F663 Platinum Silicone Foams expands           3.5 times its original volume and develops a uniform 20 lb./cu. ft. cell structure (320 kg/m3). Vibrant colors can be achieved by adding Silc-Pig  silicone color pigments.         Cured foam is high heat resistance (will resist up to 350°F/176°C), water resistant, UV resistant and resists oxidation and ozone degradation.

Typical Applications for Platinum Cure Silicone Foams

Platinum cure Silicone Foams can be used for a variety of industrial and special effects applications including making foam filled appliances, padding/seat         

  cushioning, orthotics/orthopedics, potting and encapsulation of electrical circuits and vibration dampening.

Characteristics of Platinum Cure Silicone Foams

A. excellent foaming effect

B. Light weight and effective resilience

C. Safety and environmental protection,poisonless and harmless

D. Thermostable and cold-resistant

E. Insulation and good stability

Technical Parameters

Product

HY-F663

Appearance

 white

Mix ratio(A:B)

1:1/10:1

Mixed Viscocity  ï¼ˆmPa.s)

15000±2000

Pot life/working time (mins)

5-8

Curing time/setting time (mins)

40

Shrinkage rate (%)

0.1

Approx. volumetric expansion

3.5 times

Lbs./Cu. Foot=Kgs./Cu.meter

20 lb/ft3 = 320 kg/m3

PROCESSING RECOMMENDATIONS of Platinum Cure Silicone Foams

1. preparing:A(silicone ),B(curing agent)

2. Weighing and mixturing:The percentage of A and B is 1:1, and then mixing and stirring

3. Waiting: waiting for about 24h

4. production

 

Package:20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

Self-life:8-10 months

Price:8~20usd/kg.(contact me for details)

Specific parameters, price and delivery details, etc. welcome to call! 

If you are interested in our production, or any questions of our production , pls feel free to contact us by email!(Email:hyhl@szrl.net)

Michael

Tel: +86 -18938867553

Mob/Whatsapp: +86-18938867553

QQ: 2355542520

E-mail:hyhl@szrl.net 

Wechat:hyhl-Michael168168

S kype:hyhl@szrl.net/Michael Kenneath

Facebook:+8618938867553/Michael Kenneath

Website: http://www.szrl.net

 

[Related Categories: Chemicals ]
[Related Keywords: Silicone, rubber, silicone rubber ]
advertisements
Rtv Liquid Moulding Silicone Rubber( for Concrete, PU Resin , Gypsum C Rtv Liquid Moulding Silicone Rubber( for Concrete, PU Resin , Gypsum C

Application of rtv liquid moulding silicone rubber :
liquid molding casting silicone rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture, decorative  arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc..

Features of rtv liquid moulding silicone rubber  

RTV liquid moulding silicone rubber has the following features

a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring
b. resistance to deformation, high-temperature 220 degree centigrade
c. acid, alkali and ageing-resistance
d. low shrinkage< 0.2%
e. good tensile strength  36±2 (kgf/cm)
f. high reproduction times

 rtv liquid moulding silicone rubber data sheet 

 Model

 Appearance

 Viscosity(cs)

 Hardness(A°)

 Tensile Strength(kgf/cm)

 Tear Strength(KN/cm)

Elongation(%)

Mixing Ratio(%)

Operating Time(H/250C)

Curing Time(H/250C)

 HY- 625

 white

20000±1000

 25±2

 36±2

 22±2

 500

 2~3

 0.5

 4~6

 HY- 638

 white

23000±2000

 34±2

 49±2

 23±2

 470

 2~3

 0.5

 4~6

Operation tips of rtv liquid moulding silicone rubber

a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur.

b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber.

Notice of rtv liquid moulding silicone rubber 
1. sample is avalible
2. Reach certificate is avalible
3. FDA ,MSDS, RHOS, GSG are avalible
4. HS code:39100000

Package:25kg/drum and 200kg/drum

Self-life:12 months

Price:6-10usd/kg(contact me for details)

Specific parameters, price and delivery details, etc. welcome to call! 

If you are interested in our production, or any questions of our production , pls feel free to contact us by email!(Email:hyhl@szrl.net)

Michael

Tel: +86 -18938867553

Mob/Whatsapp: +86-18938867553

QQ: 2355542520

E-mail:hyhl@szrl.net 

Wechat:hyhl-Michael168168

S kype:hyhl@szrl.net/Michael Kenneath

Facebook:+8618938867553/Michael Kenneath

Website: http://www.szrl.net

[Related Categories: Chemicals ]
[Related Keywords: Silicone, rubber, silicone rubber ]
Platinum Cure Molding Rubber Silicone RTV Platinum Cure Molding Rubber Silicone RTV

Strenghts for platinum cure molding rubber silicone rtv

Platinum cure molding rubber silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.

Features of platinum cure molding rubber silicone rtv

1. Good characteristics of easy-operation

2. Light viscosity and good flowability

3. Low shrinkage

4. Favorable tension

5. No deformation

6. Favorable hardness

7. High temperature resistance, acid and alkali-resistance and ageing resistance

8. Food grade, non-toxic

Datasheet of platinum cure molding rubber silicone rtv

Model

Color

Mixing ratio

Pot life (mins)

Demouled time (hrs)

Hardness(A0)

Tensile-strength  (kgf/cm2)

Tear-strength (kgf/cm)

Viscosity (cps)

Elongation (%)

HY-E625

translucent

1 : 1

30-60

4±1

25±2

35±2

25±2

6000±3000

≥400

HY-E630

translucent

1 : 1

30-60

4±1

30±2

40±2

23±2

7000±3000

≥395

HY-E635

translucent

1 : 1

30-60

 4±1

35±2

47±2

    22±2

8000±3000

 ≥470

PROCESSING RECOMMENDATIONS 

1. polishing the original model

2. Fixing the original model,and then apply the release agent to brush the model equably.

3. Weighing and mixturing:The percentage of A and B is 10:1 or 1:1, and then                     mixing and stirring

4. The treatment of degassing by vacuumizer(the lasting-time is suggested to be about 2~3minutes no more than 8~10minutes)

5. Pouring the treated silicone into mould fram

6. After 3~5hours later,the mould will be finished

 

Package:20kg or 200kg /drum

Self-life:24 months

Price:10-15usd/kg(contact me for details)

Specific parameters, price and delivery details, etc. welcome to call! 

If you are interested in our production, or any questions of our production , pls feel free to contact us by email!(Email:hyhl@szrl.net)

Michael

Tel: +86 -18938867553

Mob/Whatsapp: +86-18938867553

QQ: 2355542520

E-mail:hyhl@szrl.net 

Wechat:hyhl-Michael168168

S kype:hyhl@szrl.net/Michael Kenneath

Facebook:+8618938867553/Michael Kenneath

Website: http://www.szrl.net

[Related Categories: Chemicals ]
[Related Keywords: Silicone, rubber, silicone rubber, molding ]
advertisements
HY Liquid Food Grade Platinum Cure Silicone Rubber Food Mold Manufactu HY Liquid Food Grade Platinum Cure Silicone Rubber Food Mold Manufactu

1. Specification

- Durable

- High tear strength for replication

- Non-shrinkage

- High simulation

- Cover fine details

2. Application
Food grade platinum cure silicone rubber could be mainly used for chocolate mould, candy mould, biscuit mould, nougat mould, fudge mould, fondant mould, sugar mold, tallow mold, and so on

3. Feature

Food grade platinum cure silicone rubber can be used in the field of construction applications. Because the vulcanizing reactions of addition cure silicone is fundamentally different from tin cure silicone’s, it has some characteristics that the condensation cure type do not have, such as adjustable curing rate, being completely environmentally friendly, and so on. Therefore, our platinum cure silicone is particularly applicable for large stones molds, artificial stone molds, plaster and other architecture elements replication. The following is some detailed data about the performance of this model.

4. Datasheet

Model

E615

Appearance

Translucent

Hardness(shore A)

15±2

Mix ratio (A:B)

1:1

Viscosity (mPa.s)

8000±2000

Tensile-strength (MPa)

4.2

Tear-strength (kN/m)

12±2

Elongation (%)

470

Density(g/cm3)

1.05

Shrinkage rate(%)

0.1

Pot life (mins)

20-40

Curing time (hrs)

3-5hrs(25℃) / 20-30mins(60℃)

[Related Categories: Silicone Rubber ]
[Related Keywords: food grade, silicone rubber, Food Mold, Food Mold Manufacturing ]
RTV-2 Silicone Rubber for Molding Making RTV-2 Silicone Rubber for Molding Making

RTV-2 Silicone Rubber for Molding making Detailed Description

1. RTV-2 Silicone Rubber can used for poly resin crafts, PU crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry,
2. RTV-2 Silicone Rubber is applicable for large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold,
3. RTV-2 Silicone Rubber is intend for artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.


RTV-2 Silicone Rubber for Moulding making features
1. Resistance to deformation,
2. High-temperature,
3. Acid-alkali and expansion as well as high reproduction times,
4. Good tensile strength,
5. Tear strength and elongation.

RTV-2 Silicone Rubber for Molding making operation tips
1. Weigh theliquid silicone rubber and curing agent exatly.
2. Stir theliquid silcone rubber and curing agent evenly.
3. We shouldchoose the right hardness to making diffirent size of product mold.


Shelf life for RTV-2 silicon rubber for mold making:
10~12months, when stored in a dry & cool place under the room temperature 25.
RTV-2 Silicone Rubber for Molding Making
Frequently asked questions of RTV-2 silicone rubber for mold making

Why does the silicone rubber mold have few molding times?
The silicone rubber mold has few molding times is due to follwoing reasons: Adding too much silicone oil which will destroy the molecular of silicone rubber; Making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; Making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products.

Datasheet of silicone rubber to make mold:
 

< td>4~7
Model           635#              630# 625# 620 #
Appearance white white white white
Mixing proportion of curing agent (%) 5% 5% 5% 5%
Operating time (mins 25 0C ) 40~70 60~90 40~70 30~50 
Curing time(hours 25 0C) 5~7 4~7 3~5
Hardness (A°)  35±2 30±2 25±2 20±2
Viscosity  ;(Mpas -25 0C) 30000~38000 27000~32000 17000~19000 12000~14000
Tensile-strength(Mpa) ≥4.50 ≥4.2 ≥3.2 ≥2.8
Tear-strength (KN/m)               ≥30 ≥30 ≥27 ≥32
Elongation -break(%) ≥420 ≥440  ≥440  ≥420
Linear Shrinkage (%) ≤0.3 ≤0.3 ≤0.3 ≤0.3

RTV-2 Silicone Rubber for Molding Making

Free samples, hotline call herry:+86 18938867549
Email Address: 2355542567(alt)qq(dot)com
Tel: +86 -0755-89212380
FAX: +86-0755-89948030
Website: http://www.szrl.net
        http://www.jenova-silicone.com/
E-Catalogue: http://le-marketeur.com/Silicone-Rubber/E-Catalogue2013.swfRTV-2 Silicone Rubber for Molding Making

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Rtv-2 silicone rubber, Silicone Rubber for Molding Making ]
advertisements
Non-oily RTV-2 Silicone Rubber Non-oily RTV-2 Silicone Rubber

Technical Data of Non-oily RTV-2 mold making silicone rubber:

Item: OTT-S825

Mixing ratio:100:3

Color: White

Hardness: 25±2

Viscosity (mPa.s):15000±3000

Working Time (25℃):20-40mins

Curing Time (25℃):3-5h

Tear-Strength (kN/m):≥25

Tensile- Strength (Mpa):≥4

Elogation (%):≥500

Shrinkage(%):≤0.2

 

CONTACT INFO:

If you want to know more information about RTV-2 silicone rubber, Pls call me at 86-18124160226 or write to me byott01(dot)matthew(at)gmail.com.

Thanks for all your patience.

[Related Categories: Rubber & Products ]
[Related Keywords: Non-oily RTV-2 mold making silicone rubber, silicone rubber, mold making silicone rubber, condensation silicone rubber, Condensation mold making silicone rubber, RTV-2 silicone rubber for mold making ]
Pad Printing Silicone Rubber Pad Printing Silicone Rubber

Pad Printing Silicone Rubber Product Description:

Pad Printing Silicone Rubber is a double-component silicone rubber, and can be vulcanized in room temperature. It is excellent applied for surfaceprinting of pads making of perfect irregular patterns on plastics toys, electronic toys, trademarks, keyboards, electroplating etc.

It has good resistance to wearing, no distortion, no leakage and good ink transfer.

Pad printing silicone rubber is mainly applicable to the printing of irregular patterns on plastic toys,electroplating products,electronic toys,trademarks,artwork gifts and stationery etc.

 

Pad Printing Silicone Rubber Product Features:

1. Fantastic printing effects, without any impurity

2. Friction resistance

3. Perfect resilience

4. Optically clear

5. heat-conducting.

6. High resistance to high temperature and aging(resist -60°C to 250°C)

 

Pad Printing Silicone Rubber Operation Method:

1. Uniformly stir the printing silicone rubber for 5-10 minutes in the package barrel

before use.

2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air

gun and then coat the mold with a layer of release agent.

3. The normal proportion between the printing silicone and si-oil depends on the

requirements of the customers. If pattern is too big, a soft silicon pad is needed and

the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is

needed, the silicone oil should be added less or not. The appropriate hardness of

general pad printing silicone rubber is 15A~-25 A; if too much silicone oil is added,

the silicon pad is so soft that the printing times is limited, thereby bringing about

abrasion intolerance, solvent intolerance and aging.

 

Pad Printing Silicone Rubber Technical Data:

Model Number: Y230, Y235,

Notes: The data are based on the operation under room temperature of 25 ℃.

 

Item: OTT-Y230

Mixing ratio: 9:1

Color: Red/White

Hardness: 30±2

Viscosity (mPa.s): 10000±3000

Working Time (25℃): 10-40mins

Curing Time (25℃): 1-6 h

Tear-Strength (kN/m):≥25

Tensile- Strength (Mpa):≥5.5

Elogation (%):≥500

Shrinkage(%):≤0.1

 

Shelf life for Pad Printing Silicone Rubber:

12-18 months when stored in a dry&cool place under the room temperature 25 degree.

 

Storage, Transportation for Pad Printing Silicone Rubber:

1.The products should be deposited in a clean, ventilating and shade place.

2. The products are non-dangerous goods.

3. Avoid skin and eyes contacting with the curing agent in processing.

4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.

 

CONTACT INFO:

+86 13312930902

ott01(dot)matthew(at)gmail(at)com.

Thanks for all your patience.

[Related Categories: Rubber & Products ]
[Related Keywords: pad printing silicone rubber, silicone rubber ]
advertisements
Black Color PCB Electronic Potting Silicone Black Color PCB Electronic Potting Silicone

Technical Parameters for PCB Electronic Potting Silicone

Properties index

Part A

Part B

Before Curing

Appearence

Black fluid

Colorless / yellowish fluid

Viscosisty (cps)

2500±500

-

Features when operation

Mixing Ratio ( By weight)

10:1

Operating Time (25C /min)

20~30

Curing time ( hr, basically cured)

3

Curing time ( hr, perfectly cured)

24

Hardness(shore A)

15+/-3

 

After Curing

Thermal Conductivity[W( m·K)]

≥0.4

Dielectric Strength( kV/mm)

≥25

Dielectric permittivity(1.2MHz)

3.0~3.3

Volume resistivity(Ω·cm)

≥1.0×1016

Fire Resistance

94-V

 

(Pls note all data of  PCB Electronic Potting Silicone Rubber with black color above i s in 25C with 55% humidity conditions. We don't guarantee a same date if testing under different conditions, or when data was regenerated).

Warm Tips for for PCB Electronic Potting Silicone

 1. Sealing pakage for storage. The mixture should be used up at once to avoid wast ing.
 2. Silicone belongs to non-dangerous goods, but keep away form mouth and eyes.
 3. When it gets stratified after a period of storage, Please mix HY-210# evenly before using,
      it does not affect the performance.

Shelf Life and Transportation
1. Twelve(12) months when stored at 25C in original unopened packages.
2. This is a non-dangerous product, it can be transported as general chemicals.
3. Products exceed the storage life should be confirmed normal before using.

 

Technical Guidelines
1. Pls put part A and B in separate container and stir evenly before mixing the two
   parts together.
2. Mixing Ratio part A:part B is 10:1
3. Bubble release if necessary, deaeration the mixture under 0.08 MPa for 3 minutes.
4. HY-215# is cured at roon temperature, so pls put it under room temperature after
   pouring. It comes to next process when basically cured, and it takes about 24 hours
   for completely cured.

 

 

Further information for PCB Electronic Potting Silicone, please feel free to contact Ms Miya

Website : www(dot)szrl(dot)net

Contact:  Miya   

Tel:   +86-755-89311987        

Fax:   +86-755-89948030            

Mobile: +86-18938867513

E-mail:  hyq(at)resinpu(dot)com 

Skype:   miya00760

[Related Categories: Rubber & Products ]
[Related Keywords:   Electronic Potting Silicone, silicone rubber, silicone for Black Color PCB, silicone rubber for electronic potting ]
Liquid Molding silicone rubber/(RTV) silicone rubber Liquid Molding silicone rubber/(RTV) silicone rubber

Specification 

- Durable

- High tear strength for replication

- Low shrinkage

- High simulation

- Cover fine details

 

 

Liquid Molding silicone rubber/(RTV) silicone rubber application
liquid molding silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, stationery, resin crafts, unsaturate d resin crafts, poly resin crafts, candle crafts, plastic crafts, plastercrafts, artificial plant and animal crafts, Buddhist statue crafts.

Liquid molding& nbsp;silicone rubber/ (RTV) silicone rubber features 
a) Good characteristics of easy-operation

b) Good flowability and light viscosity

c) Low shrinkage

d) No deformation

e) Favorable tension

f) Favorable hardness

g) High temperature resistance, acid and alkali-resistance and aging resistance

 

 

Liquid molding silicone rubbe r/ (RTV) silicone rubber description
Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. T in cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where&n bsp;easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes,&nb sp;all gypsum products and low-temperature metals. Our tin-cured silicone systems are the most economical. They are best used for casting resins and lo w melt metals.

Website : www(dot)szrl(dot)net

Contact:  Miya   

Tel:   +86-755-89311987        

Fax:   +86 -755-89948030            

Mobile: +86-18938867513

E-mail:  hyq(at)resinpu(dot)com 

Skype:   miya00760

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber ]
advertisements
Platinum Cure Molding Rubber Silicone RTV Platinum Cure Molding Rubber Silicone RTV

Platinum Cure Molding Rubber Silicone RTV

 

Strenghts for platinum cure molding rubber silicone rtv

 

Platinum cure molding rubber&nb sp;silicone rtv is used for prototyping and the reproduction of parts. Silicone moulds can be constructed in many different forms depending on the  ;shape of the part you are making. In this section we will outline how to create the easiest one part flat back mould.

 

 

 

Why platinum cure molding rubber silicone rtv

 

Silicone is the first choice of material when casting 3  ;dimentional shapes that contain undercuts as it exhibits excellent release properties, a high level of surface detail, very good chemical and high tem perature resistance.

 

It comes in a two-component system (base + catalyst) available in a hardness range of very soft to medium. It&nbs p;is available for making moulds that are poured, brushed or sprayed

 

 

Features of platinum cure molding rubber silicone rtv

 

1. Good characteristics of easy-operation

2. Light viscosity and good flowability

3. Low shrinkage

4. Favorable tension

5. No de formation

6. Favorable hardness

7. High temperature resistance, acid and alkali-resistance and ageing resistance

8. Food grade, non-toxic

 

 

 

Datasheet of platinum cure molding rubber silicone rtv

 

Model Color Mixing ratio Pot life (mins) Demouled time&nb sp;(hrs) Hardness (A0) Tensile-strength (kgf / cm2) Tear-strength (kgf / cm) Viscosity (cps) Elongation (%)

HY-E625 translucent 1: 1 30-60 4 ±&n bsp;1 25 ± 2 35 ± 2 25 ± 2 6000 ± 3000

HY-E630 translucent 1: 1 30-60 4 ± 1 30 ± 2 40 &pl usmn; 2 23 ± 2 7000 ± 3000

HY-E635 translucent 1: 1 30-60 4 ± 1 35 ± 2 47 ± 2 22 ± 2 8000  ± 3000

 

Any questions for platinum cure molding rubber silicone rtv, pls feel free to contact Miya

Website: www (dot) szrl  (dot) net

Contact: Miya

Tel: + 86-755-89311987

Fax: + 86-755-89948030

Mobile: + 86-18938867513

E-mail: hyq (at) resinpu (dot) com

Skype: miya00760

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, RTV silicone rubber, addition silicone rubber, liquid silicone rubber, mould grade silicone ]
mold making silicone rubber mold making silicone rubber

mold making silicone rubber application

mold making silicone rubber is primarily intended for mold making of gypsum, concrete, poly resin ,PU resin,  unsaturated resin crafts, lighting and candles crafts , plastic toys , stationery gifts crafts industry, large statue, Buddha, relievo furniture, furniture  decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, European  buildings, simu lation landscapes, animals and plants sculpture, sandstone crafts and so on. 

 

mold making silicone rubber desription 

mold making sili cone rubber is a kind of flowable liquid silicone, the quality has nothing to do with the color. It consists of two components. Part A i s a flowable liquid silicone rubber, part B is the curing agent. Firstly, after your previous work of dealing with the original model, take s ome liquid silicone rubber , add 2%-3% curing agent of the amount of silicon, and mix them evenly. Then after vacuum-pumping the mixture,  you can pour it into the mold frame.  The  silicone mold will cured in 2-4 hours.

 

mold making Silicon rubber datasheet

Model:  HY-625 mold making silicon rubber

Appearance: white

Viscosity (cs): 17000-20000

Hardness (A): 24-26

Tensile strength(kgf/cm2 ) ≥32

Tear strength (kgf /cm):≥28

Elongation break(%):≥500

Retractility  (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

 

Model:  630# mold making silico n rubber

Appearance: white

Viscosity (cs): 19000-25000

Hardness (A): 28-32

Tensile strength(kgf/cm2 ) ≥35

Tear strength (kgf /cm):≥30

E longation break(%):≥470

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time (hours): 2-4

 

Mo del:  HY-635 mold making silicon rubber

Appearance: white

Viscosity (cs): 30000-33000

Hardness (A): 35

Tensile strength(kgf/cm2 ) ≥40

Tear  strength (kgf /cm):≥32

Elongation break(%):≥450

Retractility (%):≤0.2

Curing agent mixed rate (%):2-3

Operate time (min): 30

Curing time  (hours): 2-4

 

mold making silicone rubber features: 

1. Good characteristics of easy-operation 

2. Light viscosity and good flowa bility

3. Low shrinkage

4. Excellent tensile and tear strength

5.Favorable hardness

6. High temperature resistance, acid and alkali-resistance and  ageing resistance

7. High duplication times      

 

Any questions of mold making silicon rubber, please feel free to& ; ;nbs p;contact Ms Sabrina

Tel: +86-755-89948006

Fax:+86-755-89948030

Mob: +86-18938867533

Skype:pengpeng2580

[Related Categories: Rubber & Products ]
[Related Keywords: mold silicone rubber, silicone rubber ]
advertisements
               Platinum Cure Molding Rubber Silicone RTV Platinum Cure Molding Rubber Silicone RTV

Platinum cure molding rubber silicone& nbsp;rtv is used for prototyping and  the reproduction of parts. Silicone  moulds can be constructed in m any different forms depending on the  shape of the part you are  ;making. In this section we will&nbs p;outline how to create the easiest& nbsp;one part flat back mould.

Features of platinum cure molding ru bber silicone rtv

 

1.&nbs p;Good characteristics of easy-operation

2. Light viscosity and good flo wability 

3. Low shrinkage

4. Favorable tension

5. No def ormation

6. Favorable hardness

7. High temperature resistance, acid  ;and alkali-resistance and ageing resista nce

8. Food grade, non-toxic

[Related Categories: Rubber & Products, Resin ]
[Related Keywords: silicone rubber, mold making ]
Medical Silicone Rubber for human molds Medical Silicone Rubber for human molds

The operation procedure for the H Y- E620 medical silicone rubber: < /p>

1,mixing part A and part B  by mixing ratio 1:1, and stir& nbsp;it evenly.

2,vacuumize the sili cone rubber after mixing.

3,Heating& nbsp;to cure the silicone rubber ,&n bsp;the procedure can be injection o r pouring.

Storage and notice < br /> 1.medical silicone rubber is sensitiv e chemical product ,it need to  be stored by sealing in shady a nd cool place, avoid heavy sunshine.

2.Don’t use the medical  silicone rubber with some condensation&nb sp;silicone material, and don’t com bine the silicone rubber with some&n bsp;chemicals which contain N,P,S; or&nbs p;it may cause the silicone rubber&n bsp;don’t cure, or not cured f ully.

Any more question about w omen playing doll and the proceeding  details, pls kindly feel free  to contact Mr Samuel , we will& nbsp;be happy to offer solution.

< p>For more information , pls feel&nb sp;free to contact Mr Samuel

Of fice No :0086-755-89948006

Mob:86-1893886 7572

Mail :samuelsilicone(at)yahoo(dot)com&nbs p;

Welcome to our website www&n bsp;dot szrl dot net

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: silicone rubber ]
advertisements
RTV Liquid Silicone Rubber for Concrete Molds RTV Liquid Silicone Rubber for Concrete Molds

OPERRATING INSTRUCTION of rtv liquid&n bsp;silicone rubber for concrete molds&nb sp;for garden: 

1.Stir part A&n bsp;and part B with right mixing&nbs p;ratio

evenly. And get the mix ture for vacuum-

pumping. (If t here is no vacuumizer,you can just&n bsp;pour the mixture slowly from the  corner so that less bubbles ca used).

[Related Categories: Chemical Waste ]
[Related Keywords: silicone rubber ]
 Addition cure silicon rubber for artificial stone products Addition cure silicon rubber for artificial stone products

 Features of rtv liquid silicone& nbsp;rubber for concrete mold

Two-pa rts, flowable liquid silicon & c uring agent.

Can solve the prob lem of not lighting of the cand les and the problem of sticky a nd white stains on the surface  of cement & stone products.

Good tensile strength and tear stre ngth,low shrinkage.

 It gets cu red at room temperature 25 0C w ithin 5-7 hours.

An exceptional  ;fluidity and good operability, easy  ;to be demolded.

Suitable for p ouring methods of operation for smal l sized molds making

 

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: silicone rubber ]
advertisements
 Addition cure silicon rubber for artificial stone products Addition cure silicon rubber for artificial stone products

 Features of rtv liquid silicone& nbsp;rubber for concrete mold

Two-pa rts, flowable liquid silicon & c uring agent.

Can solve the prob lem of not lighting of the cand les and the problem of sticky a nd white stains on the surface  of cement & stone products.

Good tensile strength and tear stre ngth,low shrinkage.

 It gets cu red at room temperature 25 0C w ithin 5-7 hours.

An exceptional  ;fluidity and good operability, easy  ;to be demolded.

Suitable for p ouring methods of operation for smal l sized molds making

 

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: silicone rubber ]
 Addition cure silicon rubber for artificial stone products Addition cure silicon rubber for artificial stone products

 Features of rtv liquid silicone& nbsp;rubber for concrete mold

Two-pa rts, flowable liquid silicon & c uring agent.

Can solve the prob lem of not lighting of the cand les and the problem of sticky a nd white stains on the surface  of cement & stone products.

Good tensile strength and tear stre ngth,low shrinkage.

 It gets cu red at room temperature 25 0C w ithin 5-7 hours.

An exceptional  ;fluidity and good operability, easy  ;to be demolded.

Suitable for p ouring methods of operation for smal l sized molds making

 

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: silicone rubber ]
advertisements
 Addition cure silicon rubber for artificial stone products Addition cure silicon rubber for artificial stone products

 Features of rtv liquid silicone& nbsp;rubber for concrete mold

Two-pa rts, flowable liquid silicon & c uring agent.

Can solve the prob lem of not lighting of the cand les and the problem of sticky a nd white stains on the surface  of cement & stone products.

Good tensile strength and tear stre ngth,low shrinkage.

 It gets cu red at room temperature 25 0C w ithin 5-7 hours.

An exceptional  ;fluidity and good operability, easy  ;to be demolded.

Suitable for p ouring methods of operation for smal l sized molds making

 

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: silicone rubber ]
Electronic Potting Silicone Rubber Electronic Potting Silicone Rubber

 

Main application: used for  electronic components potting, adhesive,  coating materials, insulation, since&nbs p;moistureproof, shockproof, flame retardant&n bsp;functions.

[Related Categories: Computer Cleaners, Chemical Reagent ]
[Related Keywords: silicone rubber ]
1 2 3 4 5
Scroll