Add New Sell Offer | My Sell Offers | My Sell Offers | Free Offer Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "rfid card reader"
advertisements
 Selling 13.56MHz RFID card reader module with IIC or UART interface Selling 13.56MHz RFID card reader module with IIC or UART interface

YST308 series are RFID reader/writer module which pick or send command by UART and IIC ports. YST308 series meet kinds of international contactless IC card standards. Also YST308 series can support kinds of cards from suppliers. YST308 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna.4wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability.

Qualifications

Where it can be used: bus, access control system, bank, water meter, etc.

PCD: NXP PN512

Working frequency: 13.56MHz

RF standard: ISO14443A,  ISO14443B

Operating distance: 80mm (depending on card and antenna design)

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

Interface: IIC &UART (selected by SPS pin, IIC is better)

Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps

Max command length: 1024 Bytes

Interface level: 3.3V (TTL level; 5V tolerance)

Power consumption: 50mA

Dimension: 42mm*21mm*8mm

Package: DIP32

Weight about:15g

Operating temperature: -25~+85℃(-77~+185℉)

Storage temperature: -40~+125℃(-104~+257℉)

ISP: Yes

 

Module

YST308

RF base station

PN512

Interface

IIC, UART

RF standard

ISO14443A, ISO14443B, Mifare

Reading distance

80mm

PICC

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B

 

[Related Categories: Card Reader, Access Control Card Reader ]
[Related Keywords: rfid card reader, card reader module, rfid module, 13.56MHz, RFID ]
 Selling 13.56MHz RFID card reader module with IIC or UART interface Selling 13.56MHz RFID card reader module with IIC or UART interface

YST308 series are RFID reader/writer module which pick or send command by UART and IIC ports. YST308 series meet kinds of international contactless IC card standards. Also YST308 series can support kinds of cards from suppliers. YST308 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna.4wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability.

Qualifications

Where it can be used: bus, access control system, bank, water meter, etc.

PCD: NXP PN512

Working frequency: 13.56MHz

RF standard: ISO14443A,  ISO14443B

Operating distance: 80mm (depending on card and antenna design)

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

Interface: IIC &UART (selected by SPS pin, IIC is better)

Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps

Max command length: 1024 Bytes

Interface level: 3.3V (TTL level; 5V tolerance)

Power consumption: 50mA

Dimension: 42mm*21mm*8mm

Package: DIP32

Weight about:15g

Operating temperature: -25~+85℃(-77~+185℉)

Storage temperature: -40~+125℃(-104~+257℉)

ISP: Yes

 

Module

YST308

RF base station

PN512

Interface

IIC, UART

RF standard

ISO14443A, ISO14443B, Mifare

Reading distance

80mm

PICC

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B

 

[Related Categories: Card Reader, Access Control Card Reader ]
[Related Keywords: rfid card reader, card reader module, rfid module, 13.56MHz, RFID ]
advertisements
 Selling 13.56MHz RFID card reader module with USB or RS232 interface Selling 13.56MHz RFID card reader module with USB or RS232 interface

YST307 series are RFID reader/writer module which pick or send command by USB and RS232 ports. YST306 series meet kinds of international contactless IC card standards. Also YST307 series can support kinds of cards from suppliers. YST307 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. The module is connected to the antenna by the 50Ω cable. It is with flexible antenna size and layout.

Characters:

The module is connected to the antenna by the 50Ω cable. It is with flexible antenna size and layout.

Qualifications

PCD: NXP RC500

Working frequency: 13.56MHz

RF standard: ISO14443A, ISO7816

SAM card slot: 2

Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm

Operating distance: 80 mm (depending on card and antenna design)

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

EEPROM: 4K

Interface: USB or RS232

Max command length: 1024 Bytes

Interface level: 3.3V

Power consumption: 50mA

Dimension: 80mm*60mm*8.5mm

Package: DIP32

Weight about: 100g

Operating temperature: -25~+85℃(-77~+185℉)

Storage temperature: -40~+125℃(-104~+257℉)

ISP: Yes

 

Module

YST307A

YST307C

YST307G

YST307H

RF base station

RC500

RC531

RC400

RC632

Interface

USB, RS232

USB, RS232

USB, RS232

USB, RS232

Data FLASH

4K

4K

4K

4K

Buzzle

yes

yes

yes

yes

RF standard

ISO14443A, Mifare

ISO14443A, ISO14443B, Mifare

ISO15693

ISO14443A, ISO14443B, ISO15693  Mifare

Reading distance

80mm

80mm

80mm

80mm

SAM Card slot

2

2

2

2

PICC

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B

I.CODE 1
I.CODE SLI
I.CODE SLI-S
TI Tag-it series
ST LRI series

MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B
 
I.CODE 1
I.CODE SLI
I.CODE SLI-S
TI Tag-it series
ST LRI series
 

[Related Categories: Card Reader, Access Control Card Reader ]
[Related Keywords: rfid card reader, card reader module, rfid module, 13.56MHz, RFID ]
 Selling 13.56MHz RFID card reader module with USB or RS232 interface Selling 13.56MHz RFID card reader module with USB or RS232 interface

YST306 series are RFID reader/writer module which pick or send command by USB and RS232 ports. YST306 series meet kinds of international contactless IC card standards. Also YST306 series can support kinds of cards from suppliers. YST306 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna. YST306 series RF antenna is separated from the module. The module is connected to the antenna by the 50Ω cable. It is with flexible antenna size and layout. There is a LED lamp holder, can output LED lamp state.

Qualifications

Where it can be used: bus, access control system, bank, water meter, etc.

PCD: NXP RC500

Working frequency: 13.56MHz

RF standard: ISO14443A, ISO7816

SAM card slot:4

Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm

Operating distance: 80 mm (depending on card and antenna design)

Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

EEPROM: 4K

Interface: USB or RS232

Max command length: 1024 Bytes

Interface level: 3.3V

Power consumption: 50mA

Dimension: 105mm*67mm *8.5mm

Package: DIP32

Weight about: 100g

Operating temperature: -25~+85℃(-77~+185℉)

Storage temperature: -40~+125℃(-104~+257℉)

ISP: Yes

 

Module

YST306A

YST306C

YST306G

YST306H

RF base station

RC500

RC531

RC400

RC632

Interface

USB, RS232C

USB, RS232C

USB, RS232C

USB, RS232C

Data FLASH

4K

4K

4K

4K

Buzzle

yes

yes

yes

yes

RF standard

ISO14443A, Mifare

ISO14443A, ISO14443B, Mifare

ISO15693

ISO14443A, ISO14443B, ISO15693  Mifare

Reading distance

80mm

80mm

80mm

80mm

SAM Card slot

4

4

4

4

PICC

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B

I.CODE 1
I.CODE SLI
I.CODE SLI-S
TI Tag-it series
ST LRI series

MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B
 
I.CODE 1
I.CODE SLI
I.CODE SLI-S
TI Tag-it series
ST LRI series
 

[Related Categories: Electronics, Card Reader, Access Control Card Reader ]
[Related Keywords: rfid card reader, card reader module, rfid module, 13.56MHz, RFID ]
advertisements
 Selling 13.56MHz RFID card reader with IIC or UART interface Selling 13.56MHz RFID card reader with IIC or UART interface

YST308 series are RFID reader/writer module which pick or send command by UART and IIC ports. YST308 series meet kinds of international contactless IC card standards. Also YST308 series can support kinds of cards from suppliers. YST308 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna.4wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability.

Qualifications

Where it can be used: bus, access control system, bank, water meter, etc.

PCD: NXP PN512

Working frequency: 13.56MHz

RF standard: ISO14443A,  ISO14443B

Operating distance: 80mm (depending on card and antenna design)

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

Interface: IIC &UART (selected by SPS pin, IIC is better)

Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps

Max command length: 1024 Bytes

Interface level: 3.3V (TTL level; 5V tolerance)

Power consumption: 50mA

Dimension: 42mm*21mm*8mm

Package: DIP32

Weight about:15g

Operating temperature: -25~+85℃(-77~+185℉)

Storage temperature: -40~+125℃(-104~+257℉)

ISP: Yes

 

Module

YST308

RF base station

PN512

Interface

IIC, UART

RF standard

ISO14443A, ISO14443B, Mifare

Reading distance

80mm

PICC

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 
SR176
SRI512
SRI1K
SRI2K
SRI4K
SRIX4K
T=CL TYPE B

[Related Categories: Electronics, Card Reader, Access Control Card Reader ]
[Related Keywords: rfid card reader, card reader module, rfid module, 13.56MHz, RFID ]
 Selling 13.56MHz RFID card reader module with IIC or UART interface Selling 13.56MHz RFID card reader module with IIC or UART interface

YST304 series are RFID reader/writer module which pick or send command by UART and IIC ports. YST304 series meet kinds of international contactless IC card standards. Also YST304 series can support kinds of cards from suppliers. YST304 series RF antenna is separated from the module. The module is connected to the antenna by the 50Ω cable. It is with flexible antenna size and layout. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna.

Characters:

The module is connected to the antenna by the 50Ω cable. It is with flexible antenna size and layout.

Qualifications

Where it can be used: bus, access control system, bank, water meter, etc.

PCD: NXP CV520

Working frequency: 13.56MHz

RF standard: ISO14443A

Cable to antenna: 60cm, can be custom-made, 0.1-1.5mm

Operating distance: 80 mm (depending on card and antenna design)

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

Interface: IIC &UART (selected by SPS pin, IIC is better)

Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps

Max command length: 128 Bytes

Interface level: 3.3V (TTL level; 5V tolerance)

Power consumption: 50mA

Dimension: 42mm*21mm*8mm

Package: DIP32

Weight about:15g

Operating temperature: -25~+85℃(-77~+185℉)

Storage temperature: -40~+125℃(-104~+257℉)

ISP: Yes

 

 

Module

YST304

RF base station

CV520

Interface

USB, RS232

RF standard

ISO14443A, Mifare

Reading distance

80mm

PICC

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 

[Related Categories: Electronics, Card Reader, Access Control Card Reader ]
[Related Keywords: rfid card reader, card reader module, rfid module, 13.56MHz, RFID ]
advertisements
Sell 13.56MHz RFID card reader module with small size, good price Sell 13.56MHz RFID card reader module with small size, good price

YST303 series are RFID reader/writer module which pick or send command by UART and IIC ports. YST303 series meet kinds of international contactless IC card standards. Also YST303 series can support kinds of cards from suppliers. YST303 series RF antenna is separated from the module. The RFID module can be very good at reading/writing and very stable for impedance analyzer adjusting between RF circuit and antenna.4wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability.

Qualifications

Where it can be used: bus, access control system, bank, water meter, etc.

PCD: NXP CV520

Working frequency: 13.56MHz

RF standard: ISO14443A

Operating distance: 80 mm (depending on card and antenna design)

Anti collision ability: Full functions anti collision; be able to process multi-card simultaneously; be able to set operate single card only.

Auto detecting card: yes, default OFF

Interface: IIC &UART (selected by SPS pin, IIC is better)

Communication rate: IIC 400Kbps, UART 19.2Kbps/115.2Kbps

Max command length: 128 Bytes

Interface level: 3.3V (TTL level; 5V tolerance)

Power consumption: 50mA

Dimension: 42mm*21mm*8mm

Package: DIP32

Weight about: 15g

Operating temperature: -25~+85℃(-77~+185℉)

Storage temperature: -40~+125℃(-104~+257℉)

ISP: Yes

 

 

Module

YST303

RF base station

CV520

Interface

IIC, UART

RF standard

ISO14443A, Mifare

Reading distance

80mm

PICC

 
MIFARE 1K
MIFARE 4K
MIFARE Ultralight
MIFARE Ultralight C
MIFARE Mini
MIFARE DESFire
MIFARE Plus
T=CL TYPE A
 

[Related Categories: Card Reader, Access Control Card Reader ]
[Related Keywords: rfid card reader ]
Sell RFID Reader MR800 Sell RFID Reader MR800

MR800 series for reader/writer with the popular ARM7 microprocessors are of rapid & stable, reliable operation and beautiful appearance. User can choose freely if with the LCD display modul(128x64). They support boot screen & idle screen set and picture storage etc. The interface is USB PC/SC. They can be directly used the Windows operating system with driver and the API functions. The development cycle simple and short. The reader not only supports series IC cards according to ISO14443 TypeA/B, ISO15693 but also SAM cards compliant with ISO7816 (T=0 and T=1).

·      & nbsp;  Qualifications:

·    &nb sp;    • PCD: NXP RC531, RC632; RC400, RC500(select)

·      ;    • Working frequency: 13.56MHz

·     &nbs p;   • RF standard: ISO14443A, ISO14443B, ISO15693

·     &nbs p;   • Operating distance: 100mm (Mifare One, normal distance)

·     &nb sp;   • SAM card slot: 2 slots, (supports ISO7816 T=0 and T=1)

·      &n bsp;  • Interface: USB PC/SC

·      & nbsp;  • Power supply: USB DC5V

·      &n bsp;  • Power consumption: 150mA

·      & nbsp;  • LED: four LED (red, green, blue, yellow)

·       ;   • Dimension: 123mm × 88mm × 25mm

·      &n bsp;  • Weight: About 200g

·      &n bsp;  • Operating temperature: -77 ~ +185°F

·     &n bsp;   • Storage temperature: -104 ~ +257°F

 

Model NO.

MR800UCN

MR800UCV

MR800UHN

MR810UHV

[Related Categories: RF/Microwave/Wireless Component & Assembly ]
[Related Keywords: RFID reader, rfid card reader, smart card reader, contactless card reader, ic card reader, access control system ]
advertisements
Sell 13.56MHZ  RFID Contactless Card Reader MR701 Sell 13.56MHZ RFID Contactless Card Reader MR701

MR701 is the featured products of Jinmuyu.

RF Chip:  MF RC500; MF RC531;CL RC632; SL RC400

Working Frequency:13.56MHz

RF Standard:  ISO14443A, ISO14443B, ISO15693

Operating Distance:100mm(Mifare One, special distance)

SAM: 2lots, support ISO7816 T=0, 9600bps&38400bps

Interface: RS232C or USB( inlay the CP2102 USB to RS232 converter)

Baud Rate: 9600~115200bps

Power: DC5V±1 0%

Max. Consumption: 0.9W

Dimension:123mm*88mm*25mm

Weight:Abo ut 150g

Operating Temperature: -25~+85 °C

Storage Temperature: -40~+125 °C

PC Software:  PTransWin

SDK:Base on Windows, free

Program Code: VC, VB, C++ Builder, DELPHI, Power Builder

 

Cards supported

ISO14443A

M ifare One S50

Mifare One S70

Mifare One Mini

Mifare Ultra Light

ISO14443-4 (T=CL) TYPE A Bi-face CPU Card

ISO14443B

AT88RF020

AT88RF080

S R176

SRI512

SRIX4K

ISO14443-4 (T=CL) TYPE B Bi-face CPU Card

 

ISO15693

I. CODE SLI

Tag-it HF-I

Other tags compliant the ISO 15693

ISO7816

Low -speed SAM Card(9600bps)

High speed SAM Card(38400bps)

[Related Categories: RF/Microwave/Wireless Component & Assembly ]
[Related Keywords: RFID reader, rfid card reader, smart card reader, contactless card reader, ic card reader, access control system ]
1
Scroll