Product Name

ACR ED-401B 

Category

PVC Processing Aid

Technical Specification

Appearance: White powder

Surface density (g/cm3):  0.40-0.50

Volatility (%):  ≤1.0

Viscosity (η) (Ubbelohde Viscometer):  4.8-5.3

Granularity(0.45mm,40meshes):   ≥98%

General Information

ED-401B is a medium-high molecular weight acrylic processing aid. It has good weather resistance, high impact-resist ing strength, heat stability, and low percent thermal shrinkage, can promote plastication of PVC resin, decrease process temperature and bring excellent sur face quality to finished products.

Application

ED-401B is a general purpose processing aid and suitable for PVC window and door profil es, pipes and fittings, etc.

The recommended dosage is 1.0-2.0 phr for 100 phr PVC resin.

Package, Storage & Transportation

N .W.25KG, double-layer packed, first packed in airproof plastic bag, then in woven bags with quality certificate. Store in a dry ventilated place and&nb sp;avoid light and rain. Handle and transport in accordance with general regulations.

Polyacrylate processing aid is  a polymer polymerized by one or  ; ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;am p;nb sp;will lead to the difference of&am p;am p;nb sp;the plasticizing, melt strength of& ; ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ; ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;a mp;n bsp;widely used in clear and opaque& amp; amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; amp; nbsp;products.

Standard technical data

Comparison sheet 

Polyacrylate processing aid is  a polymer polymerized by one or  ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;nb sp;will lead to the difference of&am p;nb sp;the plasticizing, melt strength of& ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;n bsp;widely used in clear and opaque& amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; nbsp;products.

Standard technical data

Comparison sheet 

Polyacrylate processing aid is a polymer polymerized by one or several kinds of acrylate monomer, which can speed up the fusion of PVC resin, increase the melt strength and uniformity, abate fracture and exudation of the fondant without bad influence of the mechanical properties of PVC. So the processing aid has been widely used in the PVC products. Different kinds of Acrylate monomer and the various proportions will lead to the difference of the plasticizing, melt strength of the Acrylic processing aid. If the viscosity of the processing aid is higher, plasticizing will be lower and melt strength higher. PVC processing aid has no obvious influence on the tensile strength and Vicat softening point, while PVC processing aid with high viscosity will increase the tensile strength and Vicat softening point. Acrylic processing aid can be widely used in clear and opaque PVC profile, PVC pipe, PVC board, PVC sheet, PVC film and WPC products. Standard technical data Type Appearance Viscosity Volatile Contents Granularity YM-401 White free-flow powder 3.5-4.2 ≤1.3% ≥98% （25 meshes standard sieve） YM-128 5.0-6.0 YM-125 8.0-10.0 YM-P20 2.5-3.2 YM-175 3.0-4.0 YM-K40 5.0-6.0 YM-51 X 05;10.5 YM-81 ≥10.5 YM-91 ≥10.0 Comp arison sheet Type Comparison Type YM-128 PA828 of LG Chemical YM-125 K125 of Rohm&Haas YM-P20 PA-20 of Kaneka P551 of Arkema K-120n of Rohm&Haas YM-91 K435 of Rohm&Haas PA-630 of Kaneka YM-K40 K-400 of Rohm&Haas PA930 of LG Chemical YM-175 K-175 of Rohm&Haas PA-101 of Kaneka

Polyacrylate processing aid is a polymer polymerized by one or several kinds of acrylate monomer, which can speed up the fusion of PVC resin, increase the melt strength and uniformity, abate fracture and exudation of the fondant without bad influence of the mechanical properties of PVC. So the processing aid has been widely used in the PVC products. Different kinds of Acrylate monomer and the various proportions will lead to the difference of the plasticizing, melt strength of the Acrylic processing aid. If the viscosity of the processing aid is higher, plasticizing will be lower and melt strength higher. PVC processing aid has no obvious influence on the tensile strength and Vicat softening point, while PVC processing aid with high viscosity will increase the tensile strength and Vicat softening point. Acrylic processing aid can be widely used in clear and opaque PVC profile, PVC pipe, PVC board, PVC sheet, PVC film and WPC products. Standard technical data Type Appearance Viscosity Volatile Contents Granularity YM-401 White free-flow powder 3.5-4.2 ≤1.3% ≥98% （25 meshes standard sieve） YM-128 5.0-6.0 YM-125 8.0-10.0 YM-P20 2.5-3.2 YM-175 3.0-4.0 YM-K40 5.0-6.0 YM-51 X 05;10.5 YM-81 ≥10.5 YM-91 ≥10.0 Comp arison sheet Type Comparison Type YM-128 PA828 of LG Chemical YM-125 K125 of Rohm&Haas YM-P20 PA-20 of Kaneka P551 of Arkema K-120n of Rohm&Haas YM-91 K435 of Rohm&Haas PA-630 of Kaneka YM-K40 K-400 of Rohm&Haas PA930 of LG Chemical YM-175 K-175 of Rohm&Haas PA-101 of Kaneka

Polyacrylate processing aid is  a polymer polymerized by one or  ; ; ; ; ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;a mp;a mp;a mp;a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ; ; ; ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;am p;am p;am p;am p;nb sp;will lead to the difference of&am p;am p;am p;am p;am p;nb sp;the plasticizing, melt strength of& ; ; ; ; ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ; ; ; ; ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;am p;am p;am p;am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; amp; amp; amp; amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;a mp;a mp;a mp;a mp;n bsp;widely used in clear and opaque& amp; amp; amp; amp; amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; amp; amp; amp; amp; nbsp;products.

Standard technical data

Comparison sheet 

Polyacrylate processing aid is  a polymer polymerized by one or  ; ; ; ; ; ; ; ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;a mp;a mp;a mp;a mp;a mp;a mp;a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ; ; ; ; ; ; ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;am p;am p;am p;am p;am p;am p;am p;nb sp;will lead to the difference of&am p;am p;am p;am p;am p;am p;am p;am p;nb sp;the plasticizing, melt strength of& ; ; ; ; ; ; ; ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ; ; ; ; ; ; ; ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;am p;am p;am p;am p;am p;am p;am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; amp; amp; amp; amp; amp; amp; amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;a mp;a mp;a mp;a mp;a mp;a mp;a mp;n bsp;widely used in clear and opaque& amp; amp; amp; amp; amp; amp; amp; amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; amp; amp; amp; amp; amp; amp; amp; nbsp;products.

Standard technical data

Comparison sheet 

Oktarget polymer  is mainly in the business of research & developing, manufacturing and sales of PVC additives. It is the largest production base of acrylic impact modifier and processing aid in China. The leading products of the company are: Acrylic Impact Modifiers (20,000 ton/yr), Acrylic Processing Aids (10,000/yr), Impact Modifiers MBS resin (20,000 ton/yr) and medium and ultra-high MW Acrylic Processing Aids (10,000 ton/yr), Methyl tin mercaptide(2,000 ton/yr) , Epoxided soybean oil (2,000 ton/yr), Phosphorous acid(5,000 ton/yr). These products are widely used in hard products such as PVC calendaring, PVC profiles, PVC foam pipes, PVC pipe fitting, PVC decorative sheets, PVC films, etc.