VAN-BUS Data Protocol Interface tradenote.net

Marketplace of export and import, offers company directory, catalog and trade leads to importer exporter manufacturer wholesaler supplier.

Add New Product | My Products | Free Product Alert

Sell Offers

Buy Offers

Products

Companies

Keyword "protocol"

VAN-BUS Data Protocol Interface (03/08/2006)
Specifications: 6 Function stalk control Allows you to use the OEM steering wheel controls with aftermarket radios. Provides ignition feed to radio. Full steering wheel control functions. (but no display)

[Related Categories: Others ]
[Related Keywords: VAN-BUS, data, protocol, interface ]

Protocol Converter (03/29/2006)
Optone E1/V.35 protocol converter is a kind of multifunctional interface device compatible with the protocols of last layer and supporting synchronous 2.048Mbps speed. With E1 transceiver of high performance, the driving distance of balance interface on the twisted wire reaches to 1.6KB. For this account, it can be used as 2MB high-speed short-distance modem. Features: 1) To complete the conversion of E1 and V.35 Interface 2) Data speed: 2.048Mbps 3) With the function of high-speed short-distance Modem, it may transmit 1.6KB on 0.66mm (22AWG) twisted wire, 250M on the coaxial wire (they are the virtual values and the actual value may be fewer than these) 4) Coding mode: HDB3 5) The operating clock may support the built-in clock, exterior clock or network recovery clock 6) The transparent signal transmission and conversion conforms to the standards recommended by ITU-TG703 7) TX, RX, ERR and POWER signal indicators are to be provided 8) Two kinds of interfaces of 120Ω and 75Ω are provided E1 line side 9) There is a built-in switch power with wide range of voltage and reliable performances 10) The metal case is designed as per the trade standards 11) The freestanding product is compact with convenient setting 12) Quality warranty for a long time as five years Parameters of ITU-TG703 Interface on the side of network line: 1) Type: two-way 2.048Mbps synchronous data 2) Resistance: RJ-45: 120Ω for balanced type and BNC: 75Ω for unbalanced type 3) Clock frequency: 2.048MHz 4) Interface connection: RJ-45 or BNC 5) Compatibility: G.703 6) Line code: HDB3 Parameters of data communication interface: 1) Type of interface: DCE CCITT V.35 2) Data speed: 2.048Mbps 3) Interface connection: DB25 (negative port), connected with V. 35 interface of 36 pin by a cable provided with the unit 4) Dimensions: 170 x 9.8 x 2.4mm 5) Operating voltage: AC 180V - 240V (50HZ / 60HZ), power:

[Related Categories: Network Device ]
[Related Keywords: protocol, Converter ]

Protocol Converter (E1 / Ethernet) (06/04/2006)
Features: 1) Single port access to E1 and Fractional E1 2) Built-in LTU (line terminating unit) 3) Protocol conversion between G.703 and 10Base-T 4) Built-in with 10,000 Ethernet MAC address list, capable of address filtering, support MAC address regeneration automatically) store 1024 frames 5) Ethernet interface complies with IEEE802.3.10M full / half duplex), support VLAN function 6) Transmission data rate from 64KBps up to 2048Kbps 7) Excellent alarm function 8) Easy to use and maintain Specifications: 1) Indicators: a) PWR (green): power on b) DUP (green): on indicates Ethernet port is full duplex mode c) COL (yellow): flashing indicates Ethernet port clash d) L/A (green): flashing indicates Ethernet port transmitting signal, on indicates normally connect for Ethernet port e) 10/100 (green): on indicates data rate is 100M f) Work (green): on indicates receiving E1 signal g) Alarm (yellow): on indicates remote alarm of FE1 frame synchronous signal loss h) Run (green): flashing indicates system is normal 2) 10Base-T interface a) Physical interface type: RJ-45 b) Data rate: 10/100M 3) E1 2MBps link: a) Framing - unframed / framed, CCS or CAS, CRC4 on or off b) Bit rate - 2MBps and n x 64Kbps c) Line code - either HDB3 or AMI d) Line impedance - 75 ohms BNC and 120 ohms RJ-45 e) Jitter performance - according to CCITT G.823 f) Compliance - CCITT G.703, G.704, G.706 and G.732 4) Console interface specifications: a) Physical connector: RJ-45 b) Date rate: 57,600Bps 5) Power supply: a) -48V DC: -36 V DC ~ -72V DC 220VAC: 165V AC - 265V AC b) Power consumption:

[Related Categories: Inverters & Converters ]
[Related Keywords: protocol, Converter, Ethernet ]

E1 to 10/100M Protocol Converters (03/08/2006)
MODEL7211 converter provides easy conversion from ITU-T G.703 E1 channel to Ethernet interface, and can be used widely in connecting between WAN and LAN, monitoring, etc. The Ethernet interface is 10/100Mbps auto negotiation and can be full/half duplex. The E1 is transparent and in full rate, which can support the E1 unframed mode, including fractional E1. A pair of MODEL7211 offers a cost effective solution for using existing E1 leased lines for transparent Ethernet service. Local management of the MODEL7211 converter is provided via DIP switches. Front panel LEDs monitor the G.703 link, Ethernet LAN and serial ports for status and loss of Sync. MODEL7211 compact G.703 access converter provides E1/2.048 Mbps network termination as well as serial or Ethernet LAN interface conversion in a standalone or rack mount package. Model 7211 terminates the G.703 Telco interface and converts the data for transmission to a user-oriented 10BaseT interface. Features: 1) Using E1 line lucency transfer Ethernet data 2) Support local clock and line clock 3) Support pretend random coding loop test 4) E1(G.703) interface support 120Ω (RJ-45)and 75Ω (BNC double coaxial) 5) Ethernet MAC address percolate function 6) Support VLAN over length data bag 7) Ethernet port support 10M/100M full-duplex / half-duplex Specifications: 1) Interface standard: ITU-T G.703 standard and 10/100Base-T standard 2) E1 signal (BNC): in, out 3) E1 signal (RJ-45): T+, T-, R+, R-, GND 4) Ethernet signal: T+, T-, R+, R-, GND 5) E1 port rate: 2.048Mbps 6) Ethernet rate: 10Mbps 7) Ethernet port working: full-duplex / half-duplex 8) Data compress: non-compress or Tinygram data compress style 9) MAC address percolate: 10,000 MAC address information 10) Ethernet data length: support most Ethernet frame 1,518 bytes, no support VLAN over length data bag 11) E1 port coding: HDB3 12) Ethernet port coding: Manchester codes 13) E1 port transmission: 2km 14) Ethernet transmission: 100m 15) E1 port protection: 1,500V electromagnetism isolation 16) Ethernet protection: 1,500V electromagnetism isolation 17) E1 port type: 120Ω (RJ-45)or 75Ω (BNC double coaxial) 18) Ethernet port type: 120Ω(RJ-45) 19) Working temperature: -25 to 70°C 20) Storage temperature: -40 to 85°C 21) Relative humidity: 5% to 95% 22) Input power: 220V AC 23) Consumption: 2W 24) Dimensions (L x W x H): 227 x 147 x 42mm 25) Shell: plastic 26) Color: black 27) Weight: 260g 3onedata Other Price Terms: FOB, CIF Payment Terms: T/T, L/C Certification(s): ISO9001Supply Ability: 2,000pcs/month

[Related Categories: Inverters & Converters ]
[Related Keywords: 10/100M, protocol, converters ]

Compact Protocol Analyzer (11/14/2006)
Specifications: LE-1100-E is a model designed for asynchronous communications, which is available at a reasonable price. This model helps monitor asynchronous communications at a max. 115.2Kbps in real time, and translate into PPP that is used for the internet connection between a PC and a modem. It includes the following functions: online monitoring, simulation, and BERT. Furthermore, it comes as standard with RS-232C, and is available for RS-422/485 and current loop TTL by using interface expansion boards. Interface; RS-232C/V.24 Speed; Max. speed (full-duplex) 115.2Kbps Max. speed (half-duplex) 115.2Kbps * Entry model designed specifically for asynchronous communications. Good balance of required measuring functions and cost-performance.

[Related Categories: Electronic Instrument ]
[Related Keywords: compact, protocol, analyzer ]

Multi Protocol Analyzer (01/03/2006)
Specifications: LE-3200-E is a standard model with the powerful monitoring and sophisticated simulation functions. Also, this model can significantly help increase a communications trouble analysis and efficiency for device development by idle time measurement, the trigger of data receipt and etc. It enables a measurement test for a communication circuit at a max. 1.544Mbps. The program mode is available for simulating the communications protocols including condition monitoring. Interface; RS-232C (V.24), RS-422/485 (RS-530) Speed; Max. speed (full-duplex) 1Mbps Max. speed (half-duplex) 1.544Mbps * Supports multi protocols at the range from asynchronous to packet transmission system such as BSC, HDLC and so on. * Battery drive in B5 size and 950g

[Related Categories: Electronic Instrument ]
[Related Keywords: Multi, protocol, analyzer ]

Dual Protocol IP Telephone (09/05/2005)
Specifications: DRACOM is proud to be the pioneer of TRUE "plug and play" IP Phones. You literally take it out of the box and plug it into your LAN, DSL or Cable and it will work. We offer both of the leading protocols in one phone. Our phones offer the most number of standard features at an unbelievably low price. With DRACOM IP Phones, you get: * True plug and play IP Phones * The lowest learning curve in the industry * Low cost * Reliability * Network Wizard * Configuration Wizard * Auto-Provisioning * Auto Provision update * Auto Software update * Customizable Display * Durability DRACOM's line of IP Phones: 63xx Series IP Phone DRACOM

[Related Categories: Telephones & Parts ]
[Related Keywords: Dual, protocol, telephone ]

FE1/V.35 Protocol Converter (05/17/2006)
Features: 1) The ZDE-FEV series FE1/V.35 protocol converter is a N x 64K (N = 1 - 32) E1 to V.35 interface converter device with an SLSI as core 2) On the date terminal, users can flexibly choose DTE or DCE modes, and it can connect all G.703/G.704 networks of NX 64Kbps Other Price Terms: FOB, CFR, CIF Payment Terms: L/C Certification(s): ISO9001Supply Ability: 10,000pcs/year

[Related Categories: Fiber Optic Equipment ]
[Related Keywords: fe1/v, protocol, Converter ]

4E1/10 Base-T Protocol Converter (03/02/2006)
Features: 1) This converter provides conversion from 4E1 to 10 Base-T interfaces 2) Can point-to-point transmit MAC frames via 1 - 4E1 with a maximum transmission rate of 7.68Mbps 3) Self-checks and uses valid E1 channels Other Price Terms: FOB, CFR, CIF Payment Terms: L/C Certification(s): ISO9001Supply Ability: 10,000pcs/year

[Related Categories: Fiber Optic Equipment ]
[Related Keywords: 4E1/10, base-T, protocol, Converter ]

Dual Protocol Business IP Telephone (07/13/2005)
Specifications: DRACOM is proud to be the pioneer of TRUE "plug and play" IP Phones. You literally take it out of the box and plug it into your LAN, DSL or Cable and it will work. We offer both of the leading protocols in one phone. Our phones offer the most number of standard features at an unbelievably low price. With DRACOM IP Phones, you get: True plug and play IP Phones * The lowest learning curve in the industry * 128x64 pixels graphical backlit display * Full duplex speakerphone * Reliability * Network Wizard * Configuration Wizard * Auto-Provisioning * Auto Provision update * Auto Software update * Customizable Display * Durability DRACOM's line of IP Phones: 82xx Series IP Phone DRACOM

[Related Categories: Network Communications ]
[Related Keywords: Dual, protocol, business, telephone ]

E1-V.35 Protocol Converter (01/10/2006)
Features: 1) Can realize transparent transmission in E1, bandwidth is 2048KBps 2) Supports 75ohm (unbalance) and 120ohm (balance) 3) Based on self copyright IC, main chip self-copyright 4) Matches ITU-T V.35, G.703, G.704 standard 5) Provides E1 interface option: 75ohm (unbalance) and 120ohm (balance) 6) V.35 support hot plug 7) V.35 interface have multi clock and timing for option 8) Provides 4 clock types: E1 master V.35/V.24 external or internal, E1 slave V.35/V.24 external or internal 9) V.35/V.24 interface can be connected with other DCE equipment 10) Provides 3 loop functions: E1 local loop, V.35 local loop, order remote V.35 loop (unframed devices don't have this function) 11) Power: AC 85V - AC 275V, DC±48V 12) Has pseudo random code test function, easy installation and maintenance 13) Working clock can support internal-clock external-clock, and line clock 14) Network manager use SNMP 15) Dimensions: 220 (L) x 160 (W) x 35mm(H) E1-V.35 has various types to choose from: 1) GH-DH2000: E1-V.35 protocol converter (Unframed) 2) GH-DH2064: FE1-V.35 protocol converter (Framed) GH Other Price Terms: FOB Payment Terms: T/T, L/C Certification(s): ISO9001Supply Ability: 5,000pcs/month

[Related Categories: Network Communications ]
[Related Keywords: protocol, Converter ]

E1-10Base T Protocol Converter (10/03/2006)
Features: 1) Realizes transparent transport of Ethernet data in E1 route, bandwidth is 2,048Kbps 2) Doesn't need any setup and debugging 3) Supports full/half duplex auto-negotiation 4) Can transmit longest frame of IEEE 802.1Q and supports switch with VLAN function 5) Provides 75ohm; unbalance and 120ohm; E1 balance interface in the same time 6) AC 220V: 100V ∼ 275V 50Hz; DC -48: -60V ∼ -40V 7) Dimensions: 220 x 158 x 385mm Ordering information: 1) GH-DH2010: E1-10Base-T protocol converter (unframed) 2) GH-DH6410: FE1-10Base-T protocol converter (framed) GH Other Price Terms: FOB, CIF Payment Terms: T/T, L/C Certification(s): ISO9001Supply Ability: 10,000pcs/month

[Related Categories: Network Communications ]
[Related Keywords: 10Base, protocol, Converter ]

VoIP ATA Triple Protocol(H.323/SIP/MGCP) (04/25/2006)
Specifications: PV0305ATA VoIP Triple Mode Phone The PV0305ATA VoIP ATA Adapter is a flexible, high performance VoIP adapter with support for all 3 VoIP protocols (H.323 / SIP / MGCP) pre-installed. It has been designed to be cost effective, simple to use & optimised for low operational costs for the operator/service provider. Plug any standard analogue phone in to the FXS port, Ethernet port to the LAN, power-up & make your calls simply & effectively. Key Features Triple VoIP protocols (H.323 / SIP / MGCP) pre-installed Low cost VoIP ATA Adapter Features LAN Interface 1 or 2 10/100BT Ports (depends on model) DHCP client. Fixed or dynamic IP address VoIP/Telephony Features 1 or 2 analogue phone pots (FXS) (depends on model) Supports all three VoIP protocols : SIP RFC2543 & RFC3261 MGCP RFC2705 , RFC3149 & RFC3435 H323v4/H.450.1.2.4 Net2phone etc. Including built-in H.323 proxy RTP, RTCP H.323/H.450 Services Note: The services list is not exhaustive. It is dependent on PBX and/or gateway Fast-start and tunneling, citron NAT solution and various special system support. Working with openh323 and gnugk Open Source Community. Limited Support for H.450 supplemental service and conference features CLIP-display of the calling line number and name Overlap sending (optional) H.235 encryption H.245 tunnelling Call Hold (H.450.4) MGCP Services Note: The MGCP services list is not exhaustive. It is call manager dependent Business extension package offers easy display and feature keys customization CLIP-display of the calling line number and name Call waiting with number and name displayed Message waiting indication Call Services: Transfer, Hold, Enquiry, Brokering, Add party, Do Not Disturb Call forwarding (unconditional, busy, no reply) Pick-up SIP Services Call Services: Call hold, call wait, call transfer Supports STUN and Outbound Proxy for NAT Traversal Common Features Jitter buffer control, comfortable noise generation (CNG) & Automatic Gain Control (AGC) Q.931 protocol for Caller ID Supports H.245 and Q.931keypad DTMF transfer mode E.164 via Gatekeeper Auto search Gatekeeper on Ethernet Voice Codecs: G.723.15.3k/6.3k G.729, G.729a, G.729b, G.729ab, G.711(A or -Law Decoding) G.165/G.168 32ms echo cancellation G.167 32ms acoustical echo cancellation ITU-T DTMF standards compatible E.164 encoding dial rules 90 Local number storage & quick dial Management: Web Management,Upgradeable via TFTP Updates & Configuration: Dedicated FTP or TFTP server, fixed DNS name Automatically check and update new settings Automatically check upgrade binary files on server and will prompt user to update Power 7.5 to 9VDC @500mA ApprovalsUser electrical security EN 60950 Electro-Magnetic compatibility (EMC) EN 55022 Federal Communications Commission (FCC) Part 15 Class A

[Related Categories: Network Communications ]
[Related Keywords: voip, ata, triple, protocol, 323/sip/mgcp ]

Desktop Type Protocol Converter (08/14/2005)
Specifications: B2100 series product is a new generation protocol converter developed by wisense. Unlike tradition protocol converter, which only performs one-to-one conversion between different types of interface, b2100 series product introduces switch concept in addition to traditional protocol conversion function. LANCELL

[Related Categories: Network Communications ]
[Related Keywords: desktop, type, protocol, Converter ]

Protocol Converter (11/27/2005)
Specifications: 1) Provides conversion between RS232 interface and Ethernet interface 2) Supports TCP/IP, UTP auto-negotiation 3) Data rate: 300-115,200BPS 4) Interface: a) Ethernet port: RJ45 (10Base-T) b) Data port: RS232 c) Flow control: software (X on/X off), hardware (RTS/CTSDTR/DSR) 5) Power supply: 9-20V DC 6) Operating temperature: 5 - 70°C 7) Remark: we can also provide OP-RS485-ETH which support conversation between RS485 interface and Ethernet interface Optoscape Other Price Terms: FOB Shenzhen Payment Terms: T/T, L/CSupply Ability: 5,000pcs/month

[Related Categories: Network Communications ]
[Related Keywords: protocol, Converter ]

Protocol Converter (11/29/2005)
Specifications: 1) Provides conversion between ITU-T G.703 standard E1 interface and standard V.35 interface 2) 4 types of clock: master, slave, external and internal 3) 3 kinds of loopback: E1 self-looping, V.35 self-looping and V.35 being ordered by remote end to self-loop 4) Two rows of LED indicators: upper row indicate local status, lower row indicate remote status 5) The remote devices can be monitored by local devices 6) Supports SNMP network management with 4U rack mount chassis 7) E1 interface: a) Transmission speed: 2.048Mbps±50ppm b) Code: HDB3 code c) Interface signal code: ITU-T G.703 d) Impedance: BNC 75Ω (non- balanced), RJ45 120Ω (balanced) e) Interface characteristic: satisfies G.703 standard f) Vibration characteristic: satisfies G.742 and G.823 8) V.35 port: a) Transmission speed: 2.048Mbps±50ppm b) Interface characteristic: satisfies V.35 standard c) Connector: DB25 male/female joint for option d) Interface type: DCE e) Clock type: G.703 restoring clock, internal, and external clock 9) Power supply: 220V AC and/or -48V DC 10) Operation temperature: 32 - 140°F (0 - 60°C) 11) Storage temperature: -40 ~ +185°F (-40 ~ +85°C) 12) Humidity: 10 - 95% (non-condensing) 13) Dimensions: 220 x 145 x 40mm 14) Remark: we can also provide E1/V.35, E1/2V.35, E1/4V.35, FE1/2V.35 and FE1/4V.35 Optoscape Other Price Terms: FOB Shenzhen Payment Terms: T/T, L/CSupply Ability: 5,000pcs/month

[Related Categories: Network Communications ]
[Related Keywords: protocol, Converter ]

Protocol Converter (07/07/2006)
Specifications: 1) Provides conversion between E1 interface and ETH interface 2) 2 types of clock: E1 master, E1 line clock 3) 3 kinds of loopback: E1 self-looping, ETH self-looping and ETH being ordered by remote end to self-loop 4) Two rows of LED indicators: upper row indicate local status, lower row indicate remote status 5) The remote devices can be monitored by local devices 6) Supporting SNMP network management with 4U rack mount chassis 7) E1 interface: a) Interface standard: conforms to G.703 standard b) Interface rate: 64kbps, N: 1 - 32 c) Vibration characteristic: satisfies G.742 and G.823 standard d) Transmission capacity: 1 x E1 e) Clock type: internal-clock, route clock f) Connector: BNC (75Ω), RJ45 (120Ω) g) Interface impedance: 75Ω (non- balanced), 120Ω (balanced) 8) ETH interface: a) Interface rate: 10/100Mbps b) Duplex: half/full duplex self-adaptable c) Interface characteristic: supports IEEE802.3, IEEE802.1Q (VLAN) d) Physical interface: RJ45 e) Auto-MDIX: supports twisted cable and coaxial cable self-adaptable f) MAC address table: can learn 4096 MAC addresses 9) Power supply: 220V AC and/or -48V DC 10) Operation temperature: 32 - 140°F (0 - 60°C) 11) Storage temperature: -40 ~ +185°F (-40 ~ +85°C) 12) Humidity: 10 - 95% (non-condensing) 13) Dimensions: 220 x 145 x 40mm 14) Remark: we can also provide E1/ETH, E1/4ETH, E1/8ETH, 4E1/ETH, 8E1/ETH, FE1/4ETH and FE1/8ETH Optoscape Other Price Terms: FOB Shenzhen Payment Terms: T/T, L/C Certification(s): ISO9001Supply Ability: 5,000pcs/month

[Related Categories: Network Communications ]
[Related Keywords: protocol, Converter ]

Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

Hot Companies: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z