Cosel AC DC Single Output Switching Power Supply PLA600F-36
600 Watt Enclosed with Fan Power Supplies
Power Supply is source with high voltage generator designed for devices of active ionization. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar.
There is a protection card inside of Power Supply for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply.
Easy to install / High performance / Safety / Long life
Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
60W Din rail Power Supply, output voltage range: 24 V DC
Universal AC input 88 - 264Vac
Protections: Short circuit / Over load / Over voltage
All using 105°C long life electrolytic capacitors
True DC OK signal output
High operation temperature up to 70°C
Withstand 2G vibration test
High efficiency, long life and high reliability
3 years warranty
Installed on DIN rail TS35 / 7.5 or 15
UL508 ( Industrial control equipment ) listed
UL1310 Class 2 Power unit / LPS pass
DC Voltage Range
0 ~ 2.5 A
Ripple and Noise (max.)
Voltage Adj. Range
21.6 ~ 26.4 V
Setup, Rise Time
less than 800ms, less than 50ms/230Vac at full load
Hold Up Time (Typ.)
> 32ms / 230VAC >16ms / 115VAC at full load
88 V ~ 264 VAC 124 ~370 VDC
47 Hz ~63 Hz
AC Current (Typ.)
1.3 A / 115VAC 0.6A / 230VAC
Inrush Current (Typ.)
COLD START 30A / 115VAC 60A / 230VAC
< 1mA / 230VAC
> 102 % rated output power
Protection type : constant current limiting, automatically after fault condition is removed
115% ~ 150% rated output voltage
Protection type : latch-off mode
-20C ~ 70C (Refer to output load de-rating curve)
20 ~ 90% RH non-condensing
Storage Temp., Humidity
-40 ~ +85C, 10 ~95% R.H
+/- 0.03%/C (0 ~ 50C)
10 ~ 500Hz, 2G 10min./1 cycle, period for 60 min. Each along X,Y,Z axes
Safety and EMC
UL508, TUV EN60950-1 : 2006+A11, UL1310 NEC class 2 compliant
I/P - O/P : 4242 DC I/P - FG : 2121 DC 1 minute
I/P - O/P, I/P - FG, O/P - FG: 100M Ohm / 500VDC
EMI Conduction and Radiation
EN55022 : 2006 Class B
EN61000-3-2: 2006 Class A, EN61000-3-3: 1995+A1: 2001+A2: 2005
EN61204-3: 2000, EN55024:1998+A1: 2001+A2: 2003 light industry level, criteria A
Free Air convection
0.3kg ; 27Pcs / 9.3kg
DC OK signal
Relay contact (30VDC / 1A , 120VAC / 1A)
I/P 3 poles, O/P : 6 poles screw DIN termina
All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.
Tolerance: includes set up tolerance, line regulation and load regulation.
De-rating may be needed under low input voltages. Please check the de-rating curve for more details.
The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
The best price and high quality for Laptop AC Adaptor on LaptopBattery-Store.com.au. Replacement for Dell adapter, HP adapter, IBM ac adapter, Sony adapter, Toshiba adapter, Compaq Laptop battery charger, Acer ac adapter, Asus adapter, Lenovo laptop adapter with best service are our primary business, purchase replacement for Laptop AC Adapter now. New 100% compatible, 1 Year Warranty!