High-tech plasma sterilizer,disinfect medical tools especially suitable for the heat sensitive equipment, because it works under low temperature.
1.Work Principle: avail the mighty penetration ability of Hydrogen Peroxide plasma when it is in vacuum state and ultraviolet ray with ultra-high intensity produced by glow discharge to kill bacterial and virus
2.Work Temperature: ≤45°C
3.Power Supply: 220V±10%
4.Disinfecting Time :28 minutes
5.Maximum disinfecting length for catheter of 1mm\'s internal diameter is 2100mm.
6.Capacity of Inner Pot: 50L 100L 200L
Low Temperature Plasma Sterilizer is of no erosion or toxin to medical instrument and the whole disinfecting process lasts only 28minutes with 100% disinfecting rate.
Providing low temperature and high efficiency disinfection for costly instruments (such as endoscopes, special multi-electrode diagnostic catheter, catheters, micro-catheters and medical instrument which are sensitive to water and heat ) for hospitals, Low Temperature Plasma Sterilizer is of no erosion or toxin to medical instrument and the whole disinfecting process lasts only 28minutes with 100% disinfecting rate.
1. Work Principle: avail the mighty penetration ability of Hydrogen Peroxide plasma when it is in vacuum state and ultraviolet ray with ultra-high intensity produced by glow discharge to kill bacterial and virus
2. Work Temperature: ¡Ü45Co
3. Power Supply: 220V¡À10%
4. Disinfecting Time :28 minutes
5. Maximum disinfecting length for catheter of 1mm in diameter is 2100mm.
6. H2O2 Loading Mode: cartridge
7. Dosage of H2O2 each time: 5ml
8. Capacity of Inner Pot: 50L£¬100L 200Lfor different specification
9. Check disinfection effect with bio-indicating incubator attached on the sterilizer.
10. Automatic computer control with large liquid crystal touch screen and memory card (32M) which can easily backup all data.
11. Self-contained complete products: storage box for H2O2, bio-indicator, chemical indicating tape, packing sheet for various specifications.
12. Usage: immediate use only after get access to the power supply.
13. Application scope: catheter, special multi-electrode diagnostic catheter, GL endoscope, micro-catheters of fiber optic soft endoscope and medical or surgical instruments which are sensitive to water or heat (including operation instrument, orthopedic instrument, endoscope, laparoscope, endocrine surgical instrument etc.)
Note: Disinfection supplying room is key department to hospital and hospital infection prevention, so the disinfection work is very important and is developing with the development of hospitals. For various catheter, precision and costly device, endoscopes which are not resist to high temperature or high pressure, Laoken brand H2O2 Low temperature plasma sterilizer is of great effect and with a complete set of sterilization quality detecting system which ensures the success of sterilization . In addition, it does no harm to environment and human. Moreover, it is of no erosion to instrument and it will not produce harmful residues. Its time-savingness and 100% sterilizing effect can absolutely reduce hospital¡¯s stock of costly equipment and improve instrument¡¯s using rate, thus increase hospitals¡¯ economic benefit
Input power voltage (V): AC 220+/-10%
Frequency (HZ): 50
Rate input power capacity (KVA): 4.8
No-load voltage(V): 230
Output current range : 10-40
Duty cycle: 60
Insulation class: B
Protection class: IP21
Gross Weight (kg): 19
Measurement (mm): 300*160*400
160A AC/DC Pulse TIG MMA Welder and 40A Plasma Cutter
Suitable for stainless steel, titanium, copper, aluminum alloy and other metals welding.
Built-In Gas Solenoid Valve for the argon
Argon Regulator with Bubble Flow Meter
Power Voltage: AC240+5%, 50Hz
Rated Input Current: 22
Power Capacitance: 4.8 KVA
Rated Output Current: 160A
Range Of Output Current: 20-160A (15-40A)
No-Load Voltage: 56V (220V)
Working Voltage: 28V (100V)
Pre-Flow (s): 0-2
AC Output Frequency (Hz): 60
Clean Width (%) : 20-60
Slope-Down Time (s): 0-5
Tail-Gas Time (s): 2-10
Remote Control: YES
Arc-Leading: HF Vibration
Efficiency (%): 85
Rated Duty Cycle (%): 60
Insulation Class B
Protection Class: IP21
Max. Welding Thickness (mm): 9mm Steel (8mm Aluminium)
Max. Cutting Thickness (mm): 12mm (16mm in ideal conditions)