More details click here http://www.jinmuyu.com.cn/english/cpjs/jmy-101-EN.htm
DESCRIPTION Use MCS-51 MCU to make the controller to accomplish drive with the RC500
Can operate the Mifare One
It is very few to occup resources (RAM ), only 19 byte, very favorable for reduction of cost
Use RS232 and PC link to each other, through run DEMO process to operate the computer that can read and write the card.
Can be used as Mifare one read and write device.
Integrated design (The antenna can be used alone)
Offered two sets of source code of C51 and A51 with same function.

INTRODUCTION
OF HARDWARE CPU adopt MCS51

RF circuit include RC500 that produce of PHILIPS and RF antenna that set in the developboard
RS232 interface

INTRODUCTION
OF SOFTWARE PC DEMO PROCESS
Operate the developboard through inputting the command, read the content in cards, show on the interface, or write the information imported to on the card.

DEVELOPBOARD PROGRAM
1) Communication program
Intermit the receive and dispatch control, storage the information that received from the serial interface to the buffer, or send the information of the buffer area to the serial line.

2) Command process
Interpret of the received command
3) Card operating program
According to the received the command to operating the card, make use of exhausting possible few resource, not occupy the CPU\'intermit, and assure the card can quit safely from function when move the area of the read and write in any time.
Take the writing card function of the compilation for example :
Except a working register group, just occupy 1 digit of sign and 19 bytes EMS cell (include the 16 bytes are written into the data).Whether C51 or program of com-pilation may write into the 89C52, if not consider with occupy the PC communication resource, May even write into the 89C51.

Include the function as follows :
Initialize RC500, seek card, defend collide, select card, switch format of the KEY, transmit KEY, validate KEY, deduct money and add money, move the wallet to the buffer area, copy the wallet of the buffer area, card dormancy, read RC500-EEPROM, write RC500-EEPROM, resume leave factory setting of RC500, tune the use-defined RC500, tune the KEY of RC500－EEPROM, startup the antenna, close up the antenna.


CONTENT OF
THE PRODUCT 1. A piece of developboard
2. a piece of RS232 communication cable
3. A sheet of CD:
1) Chart of developboard
2) Source codes of developboard process (C51and A51), KEIL project that has already been built up.
3) PC DEMO process
4) Communication protocol between the developboard and PC
5) The way tune the antenna
6) information of the chip

JMY-102 JMY-103 JMY-104 JMY-105 JMY-106 JMY-201
--------------------------------------------------------- --------------

Company profile:

JINMUYU ELECTRONICS CO., LTD. BEIJING CHINA is a high technical supplier founded in 2003, specializing in the development, manufacture, marketing of IC cards, IC card-related equipment, system software and system integration of computer projects. Our products are widely used in the fields of finance, communications, social insurance, industrial and commercial management, taxation, enterprises and public organs, etc.

Delievry in 5 days after the payment is received.
Feel free to contact.with me at: jinmuyu_trade@vip. sina.com Mr.Liu
More details please visit our website： http://www. jinmuyu.com/english/index.htm
Notice: please search for "jinmuyu" and you\'ll find our website.

　
DESCRIPTION The series of MR600 RF reader make use of PHILIPS\'s SL RC400; MF RC500; MF RC531 and CL RC632 for PCD, Its can read and writecontactless cards that compliant withthe standard of ISO1443-A/B(include double interface card), RFid that compliant withthe standard of ISO15693, PHILIPS\' I.Code and SAM card that compliant with the standard of ISO7816; 8 BYTES LED DISPLAY; The inside contains of CLOCK, can display the time; 512K BYTES FLASH DATE MEMORY.
OPERATE CARD TYPES
Mifare One S50, Mifare One S70, Mifare One UltraLight, Mifare Pro, 66CL160S, AT88RF020, SR176, SRIX4K（TYPE-B, TI RFid Tag-it HF-I, PHILIPS I.Code, SAM (19200BPS;49000BPS)
TAB ILLUMINATE
.. MR6001A B(C) IT IS NOT HAVE THIS TERM WHEN THE INTERFACE FACE IS "U"
| | |
| | C:POWER
| | K: KEYBOARD GET POWER
| | U: USB GET POWER
| B: SUPPORT TYPES OF CARD:
| A: TYPE A
| B: TYPE B
| C: TYPE A+B
| D: TYPE A+CONTACT CARD
| E: TYPE B+CONTACT CARD
| F: TYPE A+B+CONTACT CARD
| G: RFid
| H: I.Code
A:INTERFACE FACE
S:RS232
U:USB

SUCH AS: MR-600SAK IS: COM, KEYBOARD GET POWER TYPE A READER
SUCH AS: MR-600SCU IS: COM, USBTYPE GET POWER TYPE A+B RADER

PARAMETER DATE MEMORY: OPTIONAL
DISTANCE: Mifare One >100mm
BAUD RATE: 4800 ~ 115200 BPS
USB PROTOCOL: 1.1
POWER : DC5V + 10%
MAX CONSUMPTION: 1.5W
TEMPERATURE: -10 ~ +70
RELATIVE HUMIDITY: 35% ~ 95%
DIMENSION: 141 * 100* 31 (mm)
WEIGHT: ABOUT150g

ELECTRIFY CONDITION
DISPLAY CONDITION OF LED

CONDITION MEANINGS
GREEN initialization
RED initialization successful
YELLOW initialization unsuccessful




PROGRAM VB, VC++, C++ Builder, Delphi, Power Builder
DOWNLOAD
MR600SAK MR600SBK MR600SCK MR600SGK MR600SHK
--------------------------------------------------------- ------
Company profile:

JINMUYU ELECTRONICS CO., LTD. BEIJING CHINA is a high technical supplier founded in 2003, which specializing in the development, manufacture, marketing of IC cards, IC card-related equipment, system software and system integration of computer projects. Our products are widely used in the fields of finance, communications, social insurance, industrial and commercial management, taxation, enterprises and public organs, etc.

Delievry in 5 days after the payment is received.
Feel free to contact.with me at: jinmuyu_trade@vip. sina.com
More details please visit our website： http://www. jinmuyu.com/english/index.htm
Notice: please search for "jinmuyu" and you\'ll find our website.