Marketplace of export and import, offers company directory, catalog and trade leads to importer exporter manufacturer wholesaler supplier.
More details click here http://www.jinmuyu.com.cn/english/cpjs/jmy-101-EN.htm DESCRIPTION Use MCS-51 MCU to make the controller to accomplish drive with the RC500 Can operate the Mifare One It is very few to occup resources (RAM ), only 19 byte, very favorable for reduction of cost Use RS232 and PC link to each other, through run DEMO process to operate the computer that can read and write the card. Can be used as Mifare one read and write device. Integrated design (The antenna can be used alone) Offered two sets of source code of C51 and A51 with same function. INTRODUCTION OF HARDWARE CPU adopt MCS51 RF circuit include RC500 that produce of PHILIPS and RF antenna that set in the developboard RS232 interface INTRODUCTION OF SOFTWARE PC DEMO PROCESS Operate the developboard through inputting the command, read the content in cards, show on the interface, or write the information imported to on the card. DEVELOPBOARD PROGRAM 1) Communication program Intermit the receive and dispatch control, storage the information that received from the serial interface to the buffer, or send the information of the buffer area to the serial line. 2) Command process Interpret of the received command 3) Card operating program According to the received the command to operating the card, make use of exhausting possible few resource, not occupy the CPU\'intermit, and assure the card can quit safely from function when move the area of the read and write in any time. Take the writing card function of the compilation for example : Except a working register group, just occupy 1 digit of sign and 19 bytes EMS cell (include the 16 bytes are written into the data).Whether C51 or program of com-pilation may write into the 89C52, if not consider with occupy the PC communication resource, May even write into the 89C51. Include the function as follows : Initialize RC500, seek card, defend collide, select card, switch format of the KEY, transmit KEY, validate KEY, deduct money and add money, move the wallet to the buffer area, copy the wallet of the buffer area, card dormancy, read RC500-EEPROM, write RC500-EEPROM, resume leave factory setting of RC500, tune the use-defined RC500, tune the KEY of RC500－EEPROM, startup the antenna, close up the antenna. CONTENT OF THE PRODUCT 1. A piece of developboard 2. a piece of RS232 communication cable 3. A sheet of CD: 1) Chart of developboard 2) Source codes of developboard process (C51and A51), KEIL project that has already been built up. 3) PC DEMO process 4) Communication protocol between the developboard and PC 5) The way tune the antenna 6) information of the chip JMY-102 JMY-103 JMY-104 JMY-105 JMY-106 JMY-201 --------------------------------------------------------- -------------- Company profile: JINMUYU ELECTRONICS CO., LTD. BEIJING CHINA is a high technical supplier founded in 2003, specializing in the development, manufacture, marketing of IC cards, IC card-related equipment, system software and system integration of computer projects. Our products are widely used in the fields of finance, communications, social insurance, industrial and commercial management, taxation, enterprises and public organs, etc. Delievry in 5 days after the payment is received. Feel free to contact.with me at: jinmuyu_trade@vip. sina.com Mr.Liu More details please visit our website： http://www. jinmuyu.com/english/index.htm Notice: please search for "jinmuyu" and you\'ll find our website.
More details please view:arrow: http://www.jinmuyu.com.cn/english/cpjs/MIFARE%20ONE-EN .htm DESCRIPTION 8K EEPROM Divided into 16 sectors, each sector is 4, each 16 bytes, regard one as and deposit and withdraw the unit. Each sector have independent two group KEY that can operating differently. There is function of wallets,is suitable for consuming on a small quantity. Each card has the only sequence number, is 32. Defend conflict,support many cards to operate There is no power,take the antenna by oneself , include encrypt and control logic and communication logical circuit inside. The data were 10 years in storage date,can rewrite 100,000 times, read countless. Temperatures: -20~50 (Humidity 90%) Frequency: 13.56MHZ Communication speed: 106 KBPS Distance: Within 100mm FORM M1 card divide into 16 sector, each sector make up by 4 (pieces of 0, pieces of 1, pieces of 2, pieces of 3), also according to specific address 16 of sector with 64 pieces to number the 0-63, the store structure picture as the following . ------------------------------------------ Company profile: JINMUYU ELECTRONICS CO., LTD. BEIJING CHINA is a high technical supplier founded in 2003, specializing in the development, manufacture, marketing of IC cards, IC card-related equipment, system software and system integration of computer projects. Our products are widely used in the fields of finance, communications, social insurance, industrial and commercial management, taxation, enterprises and public organs, etc. Delievry in 5 days after the payment is received. Feel free to contact.with me at: jinmuyu_trade@vip. sina.com Mr.Liu More details please visit our website： http://www. jinmuyu.com/english/index.htm Notice: please search for "jinmuyu" and you\'ll find our website.
DESCRIPTION The series of MR600 RF reader make use of PHILIPS\'s SL RC400; MF RC500; MF RC531 and CL RC632 for PCD, Its can read and writecontactless cards that compliant withthe standard of ISO1443-A/B(include double interface card), RFid that compliant withthe standard of ISO15693, PHILIPS\' I.Code and SAM card that compliant with the standard of ISO7816; 8 BYTES LED DISPLAY; The inside contains of CLOCK, can display the time; 512K BYTES FLASH DATE MEMORY. OPERATE CARD TYPES Mifare One S50, Mifare One S70, Mifare One UltraLight, Mifare Pro, 66CL160S, AT88RF020, SR176, SRIX4K（TYPE-B, TI RFid Tag-it HF-I, PHILIPS I.Code, SAM (19200BPS;49000BPS) TAB ILLUMINATE .. MR6001A B(C) IT IS NOT HAVE THIS TERM WHEN THE INTERFACE FACE IS "U" | | | | | C:POWER | | K: KEYBOARD GET POWER | | U: USB GET POWER | B: SUPPORT TYPES OF CARD: | A: TYPE A | B: TYPE B | C: TYPE A+B | D: TYPE A+CONTACT CARD | E: TYPE B+CONTACT CARD | F: TYPE A+B+CONTACT CARD | G: RFid | H: I.Code A:INTERFACE FACE S:RS232 U:USB SUCH AS: MR-600SAK IS: COM, KEYBOARD GET POWER TYPE A READER SUCH AS: MR-600SCU IS: COM, USBTYPE GET POWER TYPE A+B RADER PARAMETER DATE MEMORY: OPTIONAL DISTANCE: Mifare One >100mm BAUD RATE: 4800 ~ 115200 BPS USB PROTOCOL: 1.1 POWER : DC5V + 10% MAX CONSUMPTION: 1.5W TEMPERATURE: -10 ~ +70 RELATIVE HUMIDITY: 35% ~ 95% DIMENSION: 141 * 100* 31 (mm) WEIGHT: ABOUT150g ELECTRIFY CONDITION DISPLAY CONDITION OF LED CONDITION MEANINGS GREEN initialization RED initialization successful YELLOW initialization unsuccessful PROGRAM VB, VC++, C++ Builder, Delphi, Power Builder DOWNLOAD MR600SAK MR600SBK MR600SCK MR600SGK MR600SHK --------------------------------------------------------- ------ Company profile: JINMUYU ELECTRONICS CO., LTD. BEIJING CHINA is a high technical supplier founded in 2003, which specializing in the development, manufacture, marketing of IC cards, IC card-related equipment, system software and system integration of computer projects. Our products are widely used in the fields of finance, communications, social insurance, industrial and commercial management, taxation, enterprises and public organs, etc. Delievry in 5 days after the payment is received. Feel free to contact.with me at: jinmuyu_trade@vip. sina.com More details please visit our website： http://www. jinmuyu.com/english/index.htm Notice: please search for "jinmuyu" and you\'ll find our website.
