Add New Product | My Products | Free Product Alert

Keyword "helical"
advertisements
Helical Quartz Tube Helical Quartz Tube

Helical Quartz Heater (insulating sheath):

  • Tube outer diameter: 11.5-12 mm.
  • Tube inner diameter: 7.5 mm.
  • Helical inner diameter: 95 mm.
  • Helical -outer diameter: 118 mm.
  • Helical height: 82 mm.
  • Heat resistance: 1500Co.
  • Total number of rings in one helical:6
  • tube pitch ie. no air gab between rings: 0
[Related Categories: Heaters ]
[Related Keywords: helical quartz tube, helical, quartz, tube ]
Three-dimensional Helical Hollow Fiber Three-dimensional Helical Hollow Fiber
Specifications: In August, 2002, HUITONG GROUP has successfully developed and commissioned the largest single production line of three-dimensional helical hollow fiber, in which direct spinning and other advanced technology is being used, 6-8denier, 12-15denier helical hollow fiber shall be mainly produced. Please feel free to contact us for detailed information. Main application field of the products are for toys stuff and superior bedding with nice performance of crimping as well as softening.
[Related Categories: Synthetic Fibres ]
[Related Keywords: three-dimensional, helical, hollow, fiber ]
advertisements
Helical Paper Tubes For Aluminum Strip And Foil Industry Use Helical Paper Tubes For Aluminum Strip And Foil Industry Use
Specifications: Inner diameter:18mm to 600mm wall thickness:1mm to 25mm Other specifications are available as customers' detailed requirements Mainly used in papermaking, plastic film, and textile industries. The high-strength and large-diameter paper tubes are specially used in aluminum strip and aluminum foil industries. Payment Terms: L/C,T/T Certification(s): ISO9001:2000
[Related Categories: Others ]
[Related Keywords: helical, paper, tubes, for, aluminum, strip, and, foil, industry, use ]
Helical Type Flashtubes Helical Type Flashtubes
Applications: signal, photographic.
[Related Categories: Others ]
[Related Keywords: helical, type, Flashtubes ]
advertisements
Helical or Spur Gear Pump Helical or Spur Gear Pump
Specifications: Compared with the eccentric gear pumps, the pitch is smaller.Because of beinghelicalgear, itcan be used at places where quiet running is desired.Also they are goodin where there is a need for uninterrupted capacity (before the liquid is completelydischarged from the first gear clearence,the liquid starts to be dischargedfrom the following gear clearence) for less viscous and medium pressure (upto 30 bar)places. OPERATING PRINCIPLE:These pumps also run with the same principle of internal eccentricgear pumps.The pump shaft taking the circular motion from the motor with gear(driven). While the gears are disengaged from each other,the liquid is filledup in between the gears. The liquid is transferred in to the pressure sectionby the rotational motion of the gears coming inside the other.VIMPI
[Related Categories: Pumps & Vacuum Equipment ]
[Related Keywords: helical, or, Spur, gear, pump ]
S Helical Worn Reducer S Helical Worn Reducer
Features: 1) Technical data: a) Transmission rate: 7.18 - 14,062 b) Input power: 0.18 - 11kW c) Output speed: 0.3 - 205r/min d) Permissible torque range:
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: S, helical, worn, reducer ]
advertisements
R Series Hard Teeth Face Helical Gear Reducer (Combined) R Series Hard Teeth Face Helical Gear Reducer (Combined)
R series cylinder gear reducer has hard teeth face cylinder helical gear transmission; it can realize the same axis (double-stage and three stages) and parallel axis transmission. Its characteristic is: Features: 1) Compact construction, saves space for mounting, large load-bearing capacity and long life 2) Little difference between transmission ratio rate 3) High transmission efficiency and low noise 4) Block design, several rates can be combinated together 5) Specification: 17-167 thirteen type totally 6) Input power: 0.12-160kW (Four-stage motor) 7) Output torque: 50-18,000Nm 8) Transmission ratio: 1.3-280 9) By two mounting form: feet form and flange form. Wuma Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: r, series, hard, teeth, Face, helical, gear, reducer, (Combined) ]
JRTRX Helical Gear Reducer JRTRX Helical Gear Reducer
Features and specifications: 1) Models: 6 models ranging from JRTR57 to JRTR107 2) Realizes single step and small ratio requirements Inner packing: Carton Outer packing: Wooden cases (seaworthy) JIE Other Price Terms: FOB Shanghai,CIF Payment Terms: L/C, T/T Certification(s): ISO9001
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: JRTRX, helical, gear, reducer ]
advertisements
R Series Hard Teeth Face Helical Gear Reducer(Anatomy Plan) R Series Hard Teeth Face Helical Gear Reducer(Anatomy Plan)
R series cylinder gear reducer has hard teeth face cylinder helical gear transmission; it can realize the same axis (double-stage and three stages) and parallel axis transmission. Its characteristic is: Features: 1) Compact construction, saves space for mounting, large load-bearing capacity and long life 2) Little difference between transmission ratio rate 3) High transmission efficiency and low noise 4) Block design, several rates can be combinated together 5) Specification: 17-167 thirteen type totally 6) Input power: 0.12-160kW (Four-stage motor) 7) Output torque: 50-18,000Nm 8) Transmission ratio: 1.3-280 9) By two mounting form: feet form and flange form. Wuma Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: r, series, hard, teeth, Face, helical, gear, Reducer(Anatomy, Plan) ]
R Series Hard Teeth Face Helical Gear Reducer (Shaft Input) R Series Hard Teeth Face Helical Gear Reducer (Shaft Input)
R series cylinder gear reducer has hard teeth face cylinder helical gear transmission; it can realize the same axis (double-stage and three stages) and parallel axis transmission. Its characteristic is: Features: 1) Compact construction, saves space for mounting, large load-bearing capacity and long life 2) Little difference between transmission ratio rate 3) High transmission efficiency and low noise 4) Block design, several rates can be combinated together 5) Specification: 17-167 thirteen type totally 6) Input power: 0.12-160kW (Four-stage motor) 7) Output torque: 50-18,000Nm 8) Transmission ratio: 1.3-280 9) By two mounting form: feet form and flange form. Wuma Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Gear, Gearbox, Speed Reducer, Gear, Gearbox, Speed Reducer ]
[Related Keywords: r, series, hard, teeth, Face, helical, gear, reducer, (Shaft, Input) ]
advertisements
JRTR Helical Gear Reducer JRTR Helical Gear Reducer
Features and specifications: 1) Solid case 2) Carburized gears are durable and highly accurate 3) High overload capacity and reduced noise 4) Transmission ratios are finely classified with millions of different combinations to meet the different requirements of the customers 5) Models: 13 models ranging from JRTR17 to JRTR167 6) With foot mounting Inner packing: Carton Outer packing: Wooden cases (seaworthy) JIE Other Price Terms: FOB Shanghai, CIF Payment Terms: L/C, T/T Certification(s): ISO9001
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: JRTR, helical, gear, reducer ]
F Parallel Shaft Helical Gear Reducer F Parallel Shaft Helical Gear Reducer
Features: 1) Technical data: a) Transmission rate: 3.8 - 273 b) Input power: 0.18 - 110kW c) Output speed: 0.1 - 356r/min d) Permissible torque range:
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: f, parallel, shaft, helical, gear, reducer ]
advertisements
R Series Hard Teeth Face Cylinder Helical Gear Reducer R Series Hard Teeth Face Cylinder Helical Gear Reducer
Features: 1) Compact construction, saves space for mounting, large load-bearing capacity and long life 2) Little difference between transmission ratio rate 3) High transmission efficiency and low noise 4) Block design, several rates can be combinated together 5) Specification: 17 - 167 thirteen type totally 6) Input power: 0.12 - 160kW (Four-stage motor) 7) Output torque: 50 - 18,000Nm 8) Transmission ratio: 1.3 - 280 9) By two mounting form: feet form and flange form 10) Has hard teeth face cylinder helical gear transmission 11) Can realize the same axis (double-stage and three stages) and parallel axis transmission Wuma Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: r, series, hard, teeth, Face, Cylinder, helical, gear, reducer ]
JRTRF Helical Gear Reducer JRTRF Helical Gear Reducer
Features and specifications: 1) Solid case 2) Carburized gears are durable and highly accurate 3) High overload capacity and reduced noise 4) Transmission ratios are finely classified with millions of different combinations to meet the different requirements of the customers 5) Models: 13 models ranging from JRTRF17 to JRTRF167 6) With flange mounting Inner packing: Carton Outer packing: Wooden cases (seaworthy) JIE Other Price Terms: FOB Shanghai,CIF Payment Terms: L/C, T/T Certification(s): ISO9001
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: JRTRF, helical, gear, reducer ]
advertisements
S Series Helical Gear-Worm Reducer (With Output Shaft) S Series Helical Gear-Worm Reducer (With Output Shaft)
This series worm-gear reducers was designed after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its performance and mounting dimensions conform to the same kinds as foreign. Features: 1) The combination of worm and gear has higher efficiency and wider speed range to single worm 2) Designation of square shape, beautiful shape, compact structure, radiate heat efficiently and low noise 3) Good sealing and adaptability 4) Its combination with T gear reducer and MB/MBN variator can meet all kinds of speed requirement 5) Specification: 37 - 97 seven type totally 6) Input power: 0.12 - 22kW (Four-stage motor) 7) Output torque: 9 - 3,700N.m 8) Transmission ratio: 7.8-300 9) By feet installation, shaft installation, flange connection and flange shaft installation, mounting forms Wuma Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: S, series, helical, Gear-Worm, reducer, (with, Output, Shaft) ]
S Series Helical Gear-Worm Reducer (with Input Flange) S Series Helical Gear-Worm Reducer (with Input Flange)
Features: 1) The combination of worm and gear has higher efficiency and wider speed range to single worm 2) Designation of square shape, beautiful shape, compact structure, radiate heat efficiently and low noise 3) Good sealing and adaptability 4) Its combination with T gear reducer and MB/MBN variator can meet all kinds of speed requirement 5) Specification: 37 - 97 seven type totally 6) Input power: 0.12 ~ 22KW (Four-stage motor) 7) Output torque: 9 - 3,700Nm 8) Transmission ratio: 7.8-300 9) By feet installation, shaft installation, flange connection and flange shaft installation etc. 10) Designed after RV worm microreducer, which has a complete norm, wide speed for selection, and many mounting positions 11) Its performance and mounting dimensions conform to the same kinds Wuma Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: S, series, helical, Gear-Worm, reducer, (with, input, Flange) ]
advertisements
R Series Hard Teeth Face Helical Gear Reducer (Combined with Variator) R Series Hard Teeth Face Helical Gear Reducer (Combined with Variator)
Features: 1) Compact construction, saves space for mounting, large load-bearing capacity and long life 2) Little difference between transmission ratio rate 3) High transmission efficiency and low noise 4) Block design, several rates can be combinated together 5) 17 - 167 thirteen type totally 6) Input power: 0.12 - 160kW (Four-stage motor) 7) Output torque: 50 - 18,000Nm 8) Transmission ratio: 1.3 - 280 9) By two mounting form: feet form and flange form 10) Has hard teeth face cylinder helical gear transmission 11) Can realize the same axis (double-stage and three stages) and parallel axis transmission Wuma Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: r, series, hard, teeth, Face, helical, gear, reducer, (Combined, with ]
K Helical Bevel Gear Reducer K Helical Bevel Gear Reducer
Features: 1) Technical data: a) Transmission rate: 8.1 - 191 b) Input power: 0.12 - 270kW c) Output speed: 0.3 - 205r/min d) Permissible torque range:
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: K, helical, Bevel, gear, reducer ]
advertisements
Helical Gear Reducer Helical Gear Reducer
Features: 1) One piece cast iron housing for rigidity and alignment 2) Mounting dimensions are interchangeable with SEW 3) All the gears fixed to achieve low noisy and high output torque Supply Ability: 100,000 sets/year
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: helical, gear, reducer ]
Helical Gears Helical Gears
Features: 1) Customized manufacturing, the image / picture listed is customized gear, part or mould 2) Can be made as per customers' drawings and / or samples 3) Mass production after your approval of designed sample 4) For high precise small parts, tolerance can be controlled within 0.02mm 5) Materials: ABS, PC / ABS, PC, POM, EVA, TPE (from GE, and BASF), and PPS Chaojun Other Price Terms: EXW, FOB Shenzhen, CIF Payment Terms: T/T, L/C Certification(s): ISO9001, RoHSSupply Ability: 200,000pcs/month
[Related Categories: Gear, Gearbox, Speed Reducer ]
[Related Keywords: helical, gears ]
1 2 3