Add New Product | My Products | Free Product Alert

Keyword "grinding"
advertisements
Black Silica Carbide Black Silica Carbide

Black Silicon Carbide is produced in a high temperature electric resistance type furnace from a mixture of quartz sand and petroleum coke. Excellent raw material makes good hardness and toughness, high efficiency and durability.

Chemical Composition:

Grit Size

Sic

F.C

Fe2O3

F12-F90

≥98.50

≤0.20

≤0.60

F100-F120

≥98.00

≤0.30

≤0.80

F150-F220

≥97.00

≤0.30

≤1.20

 

 

 

Applications

1.     Grinding non-ferrous materials, rock, stone, leather, rubber, finishing tough and hard materials.

2.     Bonded abrasive tools, lapping and polishing;

3.     Widely used as a metallurgical additive and refractory material.

Size Available

F12-F1200, P12-P2500

0-1mm, 1-3mm, 6-10mm,10-18mm, 200mesh, 325mesh etc.

Other special specification could be supplied as required

 

 

[Related Categories: Refractory ]
[Related Keywords: Black silicon carbide, silicon carbide, grinding, abrasive, refractory, polishing ]
Garnet Garnet

Garnet is a kind of good hardness mineral that used as gemstone and abrasive. We have been supplying our garnet to so many countries in the field of resin & coated abrasives, sandblasting, water jet cutting etc.

Physical Index:

Physical Items

Grains

Color

Red brown

Toxicity

None

Working Temperature

1300 degree Celsius

Solubility in Water

Not soluble in Water

Specific Gravity

3.90g/cm3-4.10g/cm3

Mohs Hardness

7.5-8.0

Pathological Effects

None

Reactivity

None

Chemical Composition:

SiO2

37.09

Al2O3< /p>

20.11

Fe2O3< /p>

1.83

TiO2

0.46

MgO

5.26

FeO

29.73

CaO

2.09

MnO

1.19

Cl

0.0087

 

 

 

Applications

Ø      Free grinding and polishing

Resin abrasive

Coated abrasive

Sandblasting

Water jet cutting

Water Filtration

Used for stone washing

 

Size Available

8/12 12/20 20/40 30/60 80# 100# 120#

8# 12# 16# 24# 30# 36# 46# 60# 80# 100# 120# 150#

W60 W50 W40 W28 W20 W14

Other special specification could be supplied as required.

[Related Categories: Refractory ]
[Related Keywords: Garnet, garnet for water cutting, garnet for water filtration, Sandblasting, grinding ]
advertisements
Fused Silica Fused Silica

Fused Silica is manufactured from silica sand, through high temperature fusion, cooling, smash and selecting. The powder is produced using fused silica lump as material, it is white powder of high purity and amorphous, with the quality of low linear expansion coefficient, low stress and low radioactivity.

 

Size Available

0-1mm,1-2mm,1-3mm,3-5mm,2-5mm,5-10mm,10-50mm;

4/6, 6/16, 16/30, 30/60, 60/120, 100mesh, 200mesh, 325mesh;

*Micro powder is available as required.

Applications

1.    Used in precision casting;

2.    Refractory and optical glass manufacturing;

3.    Grinding wheel abrasives and high quality glass production;

4.    Mainly applied in plastic seal used in large-scale and extra large-scale integrate circuit;

5.    Epoxy resin, pouring, quartz rubber and other chemical industries.

Chemical Composition:

SiO2

99.9

Fe2O3& lt; /p>

15ppm

Li2O

1.0ppm

Al2O3& lt; /p>

25ppm

K2O

20ppm

Na2O

11ppm

[Related Categories: Non-metallic Mineral Deposit ]
[Related Keywords: optical glass, casting, grinding, refractory, silica, fused silica ]
Brown Fused Alumina Brown Fused Alumina

Introduction

Brown fused alumina is made by high quality bauxite as main material, fusing and purifying in a pouring electric arc furnace at a temperature of over 2200 degree Celsius.

Size Available

Abrasives F12-F1200, P12-P2500

Refractory 0-1mm,1-3mm,3-5mm,5-8mm,200mesh,325mesh

Other special specification could be supplied as required

Application

1.     Coated and boned abrasive tools

2.     Lapping and polishing process

3.     Sandblasting

4.     Producing mold of precision casting

Refractory materials including low cement casting, plastics, bricks, etc

Chemical Composition:

Grit Size

Al2O3& lt; /p>

TiO2

SiO2

Fe2O3

CaO

F4-F80

95.0-96.0

1.50-3.80

1.21

0.3

0.45

F90-F150

94.5-95.5

F180-F220

93.5-95.5

F220 Finer

≥92.0

 

 

&n bsp;

[Related Categories: Non-metallic Mineral Deposit ]
[Related Keywords: grinding, refractory, abrasive, polishing, Sandblasting, fused alumina, alumina, brown fused alumina ]
advertisements
No.4 Grinding Machine No.4 Grinding Machine

 

Grinding Machine (Wet Type)
 
Grinding Machine (Wet Type) uses Grinding Oil as a Media to achieve a fine and shiny grinding effect on either hot or cold rolled stainless steel sheets or coils. The Machine is designed to get Finishing No.3 (Coarse Finishing, Abrasive Grain From G60 to G150 ) or No.4 (Fine Finishing, Most Popular, abrasive grain from G180 Or above) and HL Finishing (Hairline Finishing, Characterized by Smooth and long line ).
 
Grinding Machine (Wet Type) starts with a 2-roller Grinding Unit, after being stretched tightly with their respective tension rollers on the top, Abrasive belts will be spinning in a high speed in grinding or removing the surface to get the desired finishing effect of No.3 or No.4. With The help of the Oil Nozzle in the inlet and outlet, the finishing will have an oily and fine result.
A 4-roller Grinding Unit is in the behind for option. Working in a similar module, the belts are now spinning in a low speed to draw out the long line effect that cannot be done by high-speed spinning belts but is favored by many.
Coiler & Decoiler System is also another option that can be chosen for Coil-to Coil Solutions.
 
Heavy-duty built, Grinding Machine (Wet Type) is featured by:
 
--- Perfectly built Recycling System, No environment Pollution
 
---Automatic belt tracking and hydraulic/pneumatic belt tensioning ensure optimum
 
 Consistency and minimized operational costs.
--- Pre-programmable execution settings for part thickness, abrasive belt head
 Depth and brush head depth
--- Automatic Thickness Adjustment, with Digital Read-Out
---4 Heavy Duty Spindles on the Bottom to support the conveyor bed, each with a
Capacity of 8 Tons. All spindles can be elevated simultaneously and precisely for
The adjustment of the thickness of work pieces.
---Strong Machine Frame, Vibration is well absorbed
 
---Large Contact Roller with Perfect Static as well as Dynamic Balance, High Spinning
 And Long life of Abrasive belts is ensured
--- Higher Efficiency
--- Fast Change of Abrasive Belts
 
--- Best Cost Performance
 
--- Wide Belts, For Maximum 2,050 MM Sheets, Plates, or Coil
 
--- Forward and Backward Transmission
 
 
Grinding Machine (Wet Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Hair line (HL, Optional) Grinding unit, Oil Recycling Unit, Degreasing, Cleaning & Drying Unit, Laminator, as well as Electrical Control System.
 
Coiler & Decoiler System would also be added for Coil to Coil Solution if needed.
[Related Categories: Metallic Processing Machinery ]
[Related Keywords: grinding, grinding machine, No.4 Finishing, hairline, Coil to Coil ]
Dry Type Grinding Machine Dry Type Grinding Machine

 

Grinding Machine (Dry Type)
No. 4 Dry type Grinding Machine works similarly with No.4 Wet Type Grinding Machine, Except that there is no Oil Nozzles in the inlet & Outlet. So instead of the Oil Recycling System in the Wet Grinding Machine, Dust Collection System is installed in this machine to remove the dust caused by Dry Type Grinding.
 
Another Distinction is that Dry Type Grinding Machine is without HL Grinding Unit that is optional in wet type grinding line.
So In this case, only Dry type No.3 (Coarse Finishing, Abrasive Grain from G60 to G320) or No.4 (Fine Finishing, Most Popular, abrasive grain from G320 Or above) can be grinded by this machine.
Coiler & Decoiler System is optional for Coil-to Coil Solutions.
 
Grinding Machine (Dry Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Dust Collection Unit, Laminator as well as Electrical Control System.
Coiler & Decoiler System would also be added for Coil to Coil Solution if needed.
[Related Categories: Metallic Processing Machinery ]
[Related Keywords: grinding, grinding machine, No.4 Finishing, hairline, Coil to Coil, Pickling Line ]
advertisements
Heavy Duty Grinding Machine Heavy Duty Grinding Machine

 

Heavy-Duty Grinding Machine
 
Heavy Duty Grinding Machine works similar with No.4 Grinding Machine.
Several Units of the Grinding Machines work together for one Purpose--- To remove the Oxide skin of HR Plates or Coils before they are further cold rolled.
Before this job was done by Pickling, which caused a major environmental problem and has made great concerns.
With the Development of Heavy-Duty environment-friendly Grinding Machine, The Solution for the environmental concerns could be revolutionary.
[Related Categories: Metallic Processing Machinery ]
[Related Keywords: grinding, grinding machine, No.4 Finishing, hairline, Coil to Coil, Pickling Line ]
Grinding Machine for Metal Sheets Grinding Machine for Metal Sheets

 

Grinding Machine (Wet Type)
 
Grinding Machine (Wet Type) uses Grinding Oil as a Media to achieve a fine and shiny grinding effect on either hot or cold rolled stainless steel sheets or coils. The Machine is designed to get Finishing No.3 (Coarse Finishing, Abrasive Grain From G60 to G150 ) or No.4 (Fine Finishing, Most Popular, abrasive grain from G180 Or above) and HL Finishing (Hairline Finishing, Characterized by Smooth and long line ).
 
Grinding Machine (Wet Type) starts with a 2-roller Grinding Unit, after being stretched tightly with their respective tension rollers on the top, Abrasive belts will be spinning in a high speed in grinding or removing the surface to get the desired finishing effect of No.3 or No.4. With The help of the Oil Nozzle in the inlet and outlet, the finishing will have an oily and fine result.
A 4-roller Grinding Unit is in the behind for option. Working in a similar module, the belts are now spinning in a low speed to draw out the long line effect that cannot be done by high-speed spinning belts but is favored by many.
Coiler & Decoiler System is also another option that can be chosen for Coil-to Coil Solutions.
 
Heavy-duty built, Grinding Machine (Wet Type) is featured by:
 
--- Perfectly built Recycling System, No environment Pollution
 
---Automatic belt tracking and hydraulic/pneumatic belt tensioning ensure optimum
 
 Consistency and minimized operational costs.
--- Pre-programmable execution settings for part thickness, abrasive belt head
 Depth and brush head depth
--- Automatic Thickness Adjustment, with Digital Read-Out
---4 Heavy Duty Spindles on the Bottom to support the conveyor bed, each with a
Capacity of 8 Tons. All spindles can be elevated simultaneously and precisely for
The adjustment of the thickness of work pieces.
---Strong Machine Frame, Vibration is well absorbed
 
---Large Contact Roller with Perfect Static as well as Dynamic Balance, High Spinning
 And Long life of Abrasive belts is ensured
--- Higher Efficiency
--- Fast Change of Abrasive Belts
 
--- Best Cost Performance
 
--- Wide Belts, For Maximum 2,050 MM Sheets, Plates, or Coil
 
--- Forward and Backward Transmission
 
 
Grinding Machine (Wet Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Hair line (HL, Optional) Grinding unit, Oil Recycling Unit, Degreasing, Cleaning & Drying Unit, Laminator, as well as Electrical Control System.
 
Coiler & Decoiler System would also be added for Coil to Coil Solution if needed.
[Related Categories: Metallic Processing Machinery ]
[Related Keywords: grinding, grinding machine, No.4 Finishing, hairline, Coil to Coil ]
advertisements
Grinding Machine (Wet Type) Grinding Machine (Wet Type)

 

Grinding Machine (Wet Type)
 
Grinding Machine (Wet Type) uses Grinding Oil as a Media to achieve a fine and shiny grinding effect on either hot or cold rolled stainless steel sheets or coils. The Machine is designed to get Finishing No.3 (Coarse Finishing, Abrasive Grain From G60 to G150 ) or No.4 (Fine Finishing, Most Popular, abrasive grain from G180 Or above) and HL Finishing (Hairline Finishing, Characterized by Smooth and long line ).
 
Grinding Machine (Wet Type) starts with a 2-roller Grinding Unit, after being stretched tightly with their respective tension rollers on the top, Abrasive belts will be spinning in a high speed in grinding or removing the surface to get the desired finishing effect of No.3 or No.4. With The help of the Oil Nozzle in the inlet and outlet, the finishing will have an oily and fine result.
A 4-roller Grinding Unit is in the behind for option. Working in a similar module, the belts are now spinning in a low speed to draw out the long line effect that cannot be done by high-speed spinning belts but is favored by many.
Coiler & Decoiler System is also another option that can be chosen for Coil-to Coil Solutions.
 
Heavy-duty built, Grinding Machine (Wet Type) is featured by:
 
--- Perfectly built Recycling System, No environment Pollution
 
---Automatic belt tracking and hydraulic/pneumatic belt tensioning ensure optimum
 
 Consistency and minimized operational costs.
--- Pre-programmable execution settings for part thickness, abrasive belt head
 Depth and brush head depth
--- Automatic Thickness Adjustment, with Digital Read-Out
---4 Heavy Duty Spindles on the Bottom to support the conveyor bed, each with a
Capacity of 8 Tons. All spindles can be elevated simultaneously and precisely for
The adjustment of the thickness of work pieces.
---Strong Machine Frame, Vibration is well absorbed
 
---Large Contact Roller with Perfect Static as well as Dynamic Balance, High Spinning
 And Long life of Abrasive belts is ensured
--- Higher Efficiency
--- Fast Change of Abrasive Belts
 
--- Best Cost Performance
 
--- Wide Belts, For Maximum 2,050 MM Sheets, Plates, or Coil
 
--- Forward and Backward Transmission
 
 
Grinding Machine (Wet Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Hair line (HL, Optional) Grinding unit, Oil Recycling Unit, Degreasing, Cleaning & Drying Unit, Laminator, as well as Electrical Control System.
 
Coiler & Decoiler System would also be added for Coil to Coil Solution if needed.
[Related Categories: Metallic Processing Machinery ]
[Related Keywords: grinding, grinding machine, No.4 Finishing, hairline, Coil to Coil ]
Grinding Machine (Coil To Coil) Grinding Machine (Coil To Coil)

 

Grinding Machine (Wet Type)
 
Grinding Machine (Wet Type) uses Grinding Oil as a Media to achieve a fine and shiny grinding effect on either hot or cold rolled stainless steel sheets or coils. The Machine is designed to get Finishing No.3 (Coarse Finishing, Abrasive Grain From G60 to G150 ) or No.4 (Fine Finishing, Most Popular, abrasive grain from G180 Or above) and HL Finishing (Hairline Finishing, Characterized by Smooth and long line ).
 
Grinding Machine (Wet Type) starts with a 2-roller Grinding Unit, after being stretched tightly with their respective tension rollers on the top, Abrasive belts will be spinning in a high speed in grinding or removing the surface to get the desired finishing effect of No.3 or No.4. With The help of the Oil Nozzle in the inlet and outlet, the finishing will have an oily and fine result.
A 4-roller Grinding Unit is in the behind for option. Working in a similar module, the belts are now spinning in a low speed to draw out the long line effect that cannot be done by high-speed spinning belts but is favored by many.
Coiler & Decoiler System is also another option that can be chosen for Coil-to Coil Solutions.
 
Heavy-duty built, Grinding Machine (Wet Type) is featured by:
 
--- Perfectly built Recycling System, No environment Pollution
 
---Automatic belt tracking and hydraulic/pneumatic belt tensioning ensure optimum
 
 Consistency and minimized operational costs.
--- Pre-programmable execution settings for part thickness, abrasive belt head
 Depth and brush head depth
--- Automatic Thickness Adjustment, with Digital Read-Out
---4 Heavy Duty Spindles on the Bottom to support the conveyor bed, each with a
Capacity of 8 Tons. All spindles can be elevated simultaneously and precisely for
The adjustment of the thickness of work pieces.
---Strong Machine Frame, Vibration is well absorbed
 
---Large Contact Roller with Perfect Static as well as Dynamic Balance, High Spinning
 And Long life of Abrasive belts is ensured
--- Higher Efficiency
--- Fast Change of Abrasive Belts
 
--- Best Cost Performance
 
--- Wide Belts, For Maximum 2,050 MM Sheets, Plates, or Coil
 
--- Forward and Backward Transmission
 
 
Grinding Machine (Wet Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Hair line (HL, Optional) Grinding unit, Oil Recycling Unit, Degreasing, Cleaning & Drying Unit, Laminator, as well as Electrical Control System.
 
Coiler & Decoiler System would also be added for Coil to Coil Solution if needed.
[Related Categories: Metallic Processing Machinery ]
[Related Keywords: grinding, grinding machine, No.4 Finishing, hairline, Coil to Coil ]
advertisements
Grinding Machine Grinding Machine

 

Grinding Machine (Wet Type)
 
Grinding Machine (Wet Type) uses Grinding Oil as a Media to achieve a fine and shiny grinding effect on either hot or cold rolled stainless steel sheets or coils. The Machine is designed to get Finishing No.3 (Coarse Finishing, Abrasive Grain From G60 to G150 ) or No.4 (Fine Finishing, Most Popular, abrasive grain from G180 Or above) and HL Finishing (Hairline Finishing, Characterized by Smooth and long line ).
 
Grinding Machine (Wet Type) starts with a 2-roller Grinding Unit, after being stretched tightly with their respective tension rollers on the top, Abrasive belts will be spinning in a high speed in grinding or removing the surface to get the desired finishing effect of No.3 or No.4. With The help of the Oil Nozzle in the inlet and outlet, the finishing will have an oily and fine result.
A 4-roller Grinding Unit is in the behind for option. Working in a similar module, the belts are now spinning in a low speed to draw out the long line effect that cannot be done by high-speed spinning belts but is favored by many.
Coiler & Decoiler System is also another option that can be chosen for Coil-to Coil Solutions.
 
Heavy-duty built, Grinding Machine (Wet Type) is featured by:
 
--- Perfectly built Recycling System, No environment Pollution
 
---Automatic belt tracking and hydraulic/pneumatic belt tensioning ensure optimum
 
 Consistency and minimized operational costs.
--- Pre-programmable execution settings for part thickness, abrasive belt head
 Depth and brush head depth
--- Automatic Thickness Adjustment, with Digital Read-Out
---4 Heavy Duty Spindles on the Bottom to support the conveyor bed, each with a
Capacity of 8 Tons. All spindles can be elevated simultaneously and precisely for
The adjustment of the thickness of work pieces.
---Strong Machine Frame, Vibration is well absorbed
 
---Large Contact Roller with Perfect Static as well as Dynamic Balance, High Spinning
 And Long life of Abrasive belts is ensured
--- Higher Efficiency
--- Fast Change of Abrasive Belts
 
--- Best Cost Performance
 
--- Wide Belts, For Maximum 2,050 MM Sheets, Plates, or Coil
 
--- Forward and Backward Transmission
 
  Grinding Machine (Wet Type) is composed of: Inlet, Outlet and Intermediate Roller Table, Short line (No.3 or No.4) Grinding Unit, Hair line (HL, Optional) Grinding unit, Oil Recycling Unit, Degreasing, Cleaning & Drying Unit, Laminator, as well as Electrical Control System.
 
Coiler & Decoiler System would also be added for Coil to Coil Solution if needed.
[Related Categories: Metallic Processing Machinery ]
[Related Keywords: Coil to Coil, hairline, No.4 Finishing, grinding machine, grinding ]
KG1 Glass Sand Belt Grinding Machine KG1 Glass Sand Belt Grinding Machine
KG1 Glass Sand Belt Grinding Machine

1. Brief introduction

KG1 glass sand belt grinding machine is easy to operate and specializes in grinding arris of flat glass.

It is suitable for grinding edger of the glass before tempering.

2. Technical parameters

(1) Max. processing size:1000 X 1500MM

(2) Power: 3.04KW

(3) Glass thickness:3-25mm

(4) Weight:250kg

(5) Dimension (mm):1300*1100*1400
[Related Categories: Cutting Tools, Machining Tool, Glass ]
[Related Keywords: glass, sand, belt, grinding, machine, km glass machinery ]
advertisements
Flap Wheel Flap Wheel

Flap wheel is a wheel type polishing tool which is formed by fixing the abrasive cloth lamellae with resin bond or by means of flange. They are used on electric tools, pneumatic tools, buffing machine, or other special grinding machine to grinding or polishing.

�

1. Product

- Product Range (available grits): P36~P600

- Backing Material: Abrasive cloth mixed with non-woven/ Pure non-woven

- Bonding: Resin over Resin

- Grain Type: Brown Fused Alumina/ Zirconia Fused Alumina

- Coating State: Open Coat/ Close Coat

- Product Form: Wheel (with hole of shaft)

- Product Specification: � 4����-- - � 15���3/4�

2. PRODUCT ADVANTAGE

�- High polishing and grinding performance

�- Combination of softness and rigidness

�- Wearability

�- Better surface finish

- Low noise and terrific sharpness

�-Easy to use and reliable in operation

3. APPLICATION

�- Surface sanding and removing

�- Derusting & Deburring

�- Irregular surfaces and deep holes sanding

�- Large area and extra length surface sanding

�- Creating long-time brush finishes

4. WORKPIECES

� -Steel�� � Non-ferrous metal��� -Automotive�� - Paints�� �- Ship

- Mechanical components������ - Electrical household appliances

[Related Categories: Abrasives ]
[Related Keywords: polishing, grinding ]
Competitive  Flap Disc Competitive Flap Disc

Flap disc is a kind of coated abrasive which is formed by bonding the abrasive cloth lamellae on the disc backing. The discs are generally mounted on electrical and pneumatic sanders to polishing and grinding.

Our top quality ZIRCONIUM grain provides superior stock removal and a fast and cool cutting action. Experience in the field on a wide variety of applications and metals have shown that zirconium oxide outperforms aluminium oxide by a good margin.

1. Product

- Product Range (available grits): P40~P320

- Backing Material: Vulcanized Fibre/Fibre Glass/Plastic/ Non-woven Cloth/ Corundum with Non-woven Cloth

- Bonding: Resin over Resin

- Grain Type: Brown Fused Alumina / Black Silicon Carbide/ Zirconia Fused Alumina

- Coating State: Open Coat/ Close Coat

- Product Form: Disc (Straight Centre & Depressed Centre)

- Product Specification: �4�, � 4-1/2�, � 5�, � 6�, � 7�, � 8�, etc.

2. PRODUCT ADVANTAGE

�- High polishing and grinding performance

�- Combination of softness and rigidness

�- Wearability

�- Better surface finish

- Only dry sanding

�- Low noise and terrific sharpness

3. APPLICATION

�- Surface sanding

�- Derusting & Deburring

�- Removal of trim weld seams

�- Sanding of surface and edges

�- Dry application

The ZA flap disc is specially used for snagging weld seam of stainless steel.

4. WORKPIECES

-Stainless Steel��� -Automotive�� �- Mechanical components���� - Ceramic�� -Semi-conductor��� - Light industry

�

[Related Categories: Abrasives ]
[Related Keywords: grinding, polishing, flap disc, abrasives ]
advertisements
Granulator, for plastics size reduction for recycle & reprocess Granulator, for plastics size reduction for recycle & reprocess

ITALICA Srl is a private own Italian Company based in the Bologna area, in the years specialized in design, development and manufacture of

-high-production Blade granulating machines for plastic material sizing process, made in Italy-.

 

Applications of Granulators concern the automatic volume reduction of plastic items to small grains (1 cm about), by fine mechanical fragmentation process: the aim is to easily treat plastics to become suitable for recycling purposes (end-life goods re-conversion to new ones for environmental purpose and effective energy & cost-saving) and to immediately re-insert scraps and just-produced plastic goods whether they are found defective in their line process same.

 

The ITALICA patent concerns the design of the mill blade-rotor: some sections of it are arranged on the power-shaft, turn adjustable in helical, forward/reverse-wedge shapes by the User itself, according to parts characteristics.

 

It is allowed therefore to process any kind and shapes (hollow and solid) of vegetable/fruit boxes, bottles, lube tanks, bulks, water/gas transport pipes/hoses, profiles, extrusion / hot stamping feedheads, flashes, and scraps, etc., by keeping the efficiency and productivity features at the top also: 1,500-2,500 kgs/hr (for the Ciclope 800 model), 2,000-3,300 kgs/hr (for the Ciclope 1000 model) at least, depending on the kind and shape of plastics to be treated.

 

The biggest Ciclope 2000 model, under design process finalisation, with wide hopper’s inlet of 2,5 x 1,2 mt, allows very large workpieces, like urban solid waste collection bins/bells, without any prior size reduction activity, featured by 6-8 tons/hr of productivity.

 

-Optional automatic belt-conveyor may feed the granulator continuously by plastic material through the hopper inlet gate. Metal detector may prevent both failures to machine due to metal scraps/parts accidentally included into plastics and to contaminate quality.

 

-Optional pneumatic pipe conveyor system, completed of power motor fan and centrifugal dust separator suitable to properly fill and store the product in big bags, connected to standard outlet circular flange of the granule collecting pool.

-Optional metal separator automatically checks produced granule and quickly removes small metal pollutants (ferrous and not ferrous materials).

-Optional noise wall cabin encloses the whole granulator body, to keep reduced the process noise, in case the machine will be located in industrial building.

 

Further details are available in the Co. website www.italicagranulatori.it, where a video shows a granulator in operation too.

[Related Categories: Waste Management, Others, Rubber Machinery, Packaging Related Machinery, Agriculture Products Processing, Chemical Machinery ]
[Related Keywords: Granulator, Shredder, grinder, BROYEUR, plastics, recycle, reprocess, Shredding, grinding ]
glass bead for sandblasting and abrasive glass bead for sandblasting and abrasive

Glass beads produce a much smoother and brighter finish than angular abrasives. Glass beads can be recycled approximately 30 times. Chemically inert and environmentally friendly, glass beads are an acceptable method of metal cleaning or surface finishing when properly controlled.

Glass bead blasting produces a clean, bright, satin finish, without dimensional change of the parts. Available in a wide range of sizes, glass beads are primarily used in blasting cabinets for honing, polishing, peening, blending, finishing, removing light burrs and cleaning most light foreign matter. For delicate thin-walled parts and thin welds, peening with glass bead abrasive material provides the right balance of stress relief without over-stressing and causing damage. Consider the size of perforations or holes through which the glass beads must pass when screen separating parts from media after use.
1. This series of glass beads can be used for smooth cleaning, deburring, matting, reduction of surface roughness, surface finish and shot peening.
2. It can be used for descaling, cleaning and deburring of steel, brass and machine parts.
3. It can be used for smooth derusting, descaling, and cleaning of metal materials and for woodworking with finest degree of roughening. Best surface preparation creating optimal adhesion for subsequent coating or glueing processes and it is particularly suitable where media loss is unavoidable.
4. It can be used for smooth cleaning, deburring and deadening of high quality metal and austenitic materials in the fields of aerospace, dental, galvano, motor, reactor and laboratory technologies. And also used for workpieces of extreme hardness.
5. It can be used for breaking down pigments for paints, food, and pharmaceutical substances as buffer and filler medium in explosion-proof plants and devicesf also as filler in filters and rectifiers in the chemical industry. Grinding glass beads are used in bead mills, sand mills, ball mills and laboratories with filter equipment.

1. Technical data
1) Size: 80um--1000um .special grain sizes upon request   
2) Specific gravity:Approx.2.5g/cm3  
3) Bulk weight:Approx 1.5kg/l  
4) Handness: According to Mohs:6  
2.Chemical property
SiO2-Al2O3-Fe2O3-MgO-CaO-Na2O-Others
[Related Categories: Abrasives ]
[Related Keywords: GLASS BEAD, grinding, abrasive, Sandblasting ]
advertisements
glass bead for grinding glass bead for grinding

Glass beads produce a much smoother and brighter finish than angular abrasives. Glass beads can be recycled approximately 30 times. Chemically inert and environmentally friendly, glass beads are an acceptable method of metal cleaning or surface finishing when properly controlled.

Glass bead blasting produces a clean, bright, satin finish, without dimensional change of the parts. Available in a wide range of sizes, glass beads are primarily used in blasting cabinets for honing, polishing, peening, blending, finishing, removing light burrs and cleaning most light foreign matter. For delicate thin-walled parts and thin welds, peening with glass bead abrasive material provides the right balance of stress relief without over-stressing and causing damage. Consider the size of perforations or holes through which the glass beads must pass when screen separating parts from media after use.
1. This series of glass beads can be used for smooth cleaning, deburring, matting, reduction of surface roughness, surface finish and shot peening.
2. It can be used for descaling, cleaning and deburring of steel, brass and machine parts.
3. It can be used for smooth derusting, descaling, and cleaning of metal materials and for woodworking with finest degree of roughening. Best surface preparation creating optimal adhesion for subsequent coating or glueing processes and it is particularly suitable where media loss is unavoidable.
4. It can be used for smooth cleaning, deburring and deadening of high quality metal and austenitic materials in the fields of aerospace, dental, galvano, motor, reactor and laboratory technologies. And also used for workpieces of extreme hardness.
5. It can be used for breaking down pigments for paints, food, and pharmaceutical substances as buffer and filler medium in explosion-proof plants and devicesf also as filler in filters and rectifiers in the chemical industry. Grinding glass beads are used in bead mills, sand mills, ball mills and laboratories with filter equipment.

1. Technical data
1) Size: 80um--1000um .special grain sizes upon request   
2) Specific gravity:Approx.2.5g/cm3  
3) Bulk weight:Approx 1.5kg/l  
4) Handness: According to Mohs:6  
2.Chemical property
SiO2-Al2O3-Fe2O3-MgO-CaO-Na2O-Others
[Related Categories: Others, Abrasives ]
[Related Keywords: GLASS BEAD, grinding, abrasive, Sandblasting ]
Cot Grinding Machine Cot Grinding Machine
Specifications: 1.1 The motors of grinding wheel, headstock and the reciprocating table are controlled by the frequency converter .Their speed can be adjusted steplessly so it's suitable for all kinds of rubber cots which have different hardness. 1.2 Adopting the system of pneumatic and trical,the quality of production and the requirements of technology are guaranteed. 2.Technical data 2.1 The power can supply 1.84KW. 2.2 Speed of headstock is from 100 to 400rpm. 2.3 Traversing speed of table is 250-630mm/min. 2.4 Max grinding diameter and length is 120*450.
[Related Categories: Others ]
[Related Keywords: Cot, grinding, machine ]
advertisements
Lens Grinding Equipment Lens Grinding Equipment
Specifications: Excess optical lens grinding equipment, both surfacing, and finishing equipment as well as ancillary manufacturing equipment necessary to grind and edge opthalmic prescription lenses, in glass, plastic, and polycarbonate, older technology, as wel as newer equipment. This is all used, but functional equipment.
[Related Categories: Optical Instrument & Parts ]
[Related Keywords: lens, grinding, equipment ]
Grinding And Polishing Machine Grinding And Polishing Machine
Specifications: Item Specifications Remarks Principal axis number 2Axis Principal axis joint thread M27 Up to user Diameter of plane mirror 350mm Rotational speed of principal axis 50~341.25rpm Stepless speed change Rotation times of axis 16.7~113.75cpm/min Principal axis 0.75kw-4set Required power 4.12kw 220,380v/50,60HZ Up to user Machine tool dimensions 2380mm x 1250mm x 1730mm Machine tool weight 1000kg
[Related Categories: Optical Instrument & Parts ]
[Related Keywords: grinding, and, polishing, machine ]
1 2 3 4 5 6 7 8 9 10  >>