Add New Product | My Products | Free Product Alert

Keyword "bend"
ductile iron pipe fittings, double socket bend/ elbow ductile iron pipe fittings, double socket bend/ elbow

 Material: ductile iron  (DI); standard: ISO2531,BS EN545, BS EN598, AWWA C219, AWWA C110, ASME B16.42; internal lining: ①cement mortar②Sulphuric Resistance Cement ③Sulphuric Resistance Cement and Epoxy  ④H.A.cement; external coated: ①zinc and bitumen②zinc and 2 epoxy coatings ③Metallic Zinc and a coating of suitable etching prima and 2 Epoxy Coatings ④zinc and PU; suitable medium: potable water、drainage、sewage、waste water; suitable tempreture: -40°~ 125°; packing: plastic film plus pallet; origin: China.

[Related Categories: Iron & Steel ]
[Related Keywords: elbow, bend, ductile iron pipe fittings ]
Bend Bend

 1) Material: A234-WPB. A420-WPL6. A234-WP12. A234-WP11. A234-WP5. A403-WP304. A403-WP< st1:chmetcnv tcsc=\"0\" numbertype=\"1\" negative=\"False\" hasspace=\"False\" sourcevalue=\"304\" unitname=\"l\" w:st=\"on\">304L< /span>. A403-WP316. A403-WP316L.< /span>

2) Bending Radius (R): R=3D, 4D, 5D, 6D, 7D, 8D, 9D, 10D < /span>

3) Bending Angle (θ): Degree 15, 30, 45, 60, 90, 135, 180 and also could manufacture according the angles given by the clients.

4) Straight Length (L): The length between two ends general from 300mm-1500mm, and also can product according to the clients\' requirement to product.

5) Outer Diameter (D): D≤1220mm

6) Wall Thickness (T): T≤120mm

7) Attn: susan at ruidatong dot com

8) End Bevel: According to the bevel of welding pipe fittings construction

9) Weight: Weight (Kg): =[0.0433(D-T)TRθ]/100000+L(the weight of two ends straight bend)



We can offer more detailed products\' information including offering designs and accept your any advice.


Welcome your inquiries and cooperation.

[Related Categories: Others ]
[Related Keywords: bend, fabricated pipe bend, “U” bend, mitre bend, cross-over bend, offset bend, quarter bend, circle bend, single offset quarter bend, single offset “U” bend ]
Bi Metal Clad Pipe Bi Metal Clad Pipe

 1. Manufacturing Process of Bimetal Clad Pipe and Bend:

Bimetal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe,  cladding realized by forming high chromium lining via centrifugal forming technique. Outer of bend uses hot-bending bend and lining is cast with high-chromium cast iron. Bends and other profile sections can be cladded in whole and this process has changed the traditional practice to fabricate bend and other profile sections by drawing polyline without changing flow pattern of material inside piping, greatly reducing conveyance resistance of material.
2. Advantages Compared with Traditional Wear Resistant
Alloy Cast Iron,  Alloy Cast Steel,  General Clad Steel Pipe and Cast Stone Pipe:
1. Good wear-resistance,  giving full play to wear-resistance of high chromium cast iron.
2. Withstanding high pressure:
Bimetal cladding pipe and bend can be used for any pressure rating. Close bonding of outer and lining by adopting special process make cladding interlayer molten-joint to ensure reliable operation.
3. Good mechanical impact and thermal impact resistance property.
4. Convenient in connection for installation:
Bimetal cladding pipe and bend can be cut and welded as you like.
[Related Categories: Steel Pipes ]
[Related Keywords: bend, Bi Metal Clad Pipe ]
pipe fitting pipe fitting


Elbow(Long radius, Short radius 1.5D,3D,5D,7D,10D),Bend, Tee(equal, straight, reducing), Reducer(eccentric, concentric),Cross(straight, reducing), Cap, Stub End
Size:  ½" to 72" and above for seamless steel up to 24" and welded steel for sizes above 24 inches

Process: Butt weld

Connect End: PE(Plain End), BE(Beveled End), Threaded


American Standard: ANSI B16.9, ANSI B16.25, ANSI B16.28, MSS SP-43,MSS SP-75

Germany Standard: DIN2605, DIN2615, DIN 2616, DIN 2617, DIN 28011

Japanese Standard: JIS P2311/2312

British Standard: BS1640

Structure: seamless, welded

Material Grade:
»Stainless Steel: ASTM A403 WP 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L…

»Carbon Steel: ASTM A234 WPB, A420 WPL3, A420 WPL6, MSS SP-75 WPHY 42, WPHY46, WPHY52, WPHY56, WPHY60, WPHY65, WPHY70; DIN: ST37.0, ST35.8, ST45.8, S235JR, P235GH

»Alloy Steel: ASTM A234 WP1, WP5,WP9,WP11,WP22,WP91, Duplex, Supper Duplex, Monel, Nickel, Inconel, Hastalloy, Copper, Brass, Bronze, Titanium, Tantalum, Bismuth, High Speed Steel, Zinc, Lead, etc.

Wall Thickness: SCH 5,SCH10, SCH 20, SCH STD,SCH 40,SCH 80, SCH 160, SCH XS, XXS


»Black painting

»Hot Galvanized

»Anti-rust varnish

»Anti-rust oil


»Sand Blasting

Machnical Test
Tensile test, Impact test, Hot tensile test, Flattering test, Bend test, Step cooling, Hardness test, Simulates heat treatment

Chemical Test
Product analysis, Positive material identification, Strauss test – Ferrite checking, Micrographic & Macrographic test SSCC test

Non Destructive Test
X-RAY, Ultrasonic test, Magnetic test, Die penetrant test

Corrosion Test
HIC-TES ASTM A262 Practice "E"Huey test-ASTM A262 Practice "A", Hic test, Pitting test

Packing: In wooden cases, wooden pallets or as per customers\' special requirement;

Certification: DIN 50049.3.1B, DIN EN10204-3.1

Special: NACE MR.01.75


[Related Categories: Cast & Forged, Valves, Gaskets & Seals, Accessories ]
[Related Keywords: Tee(equal, bend, 10D), 7D, 5d, 3D, Short radius 1.5D, Elbow(Long radius, pipe fitting, buttweld fitting ]
elbow,tee,reducer,cross,bend elbow,tee,reducer,cross,bend

SIZE: 1/8"-6"



[Related Categories: Cast & Forged ]
[Related Keywords: elbow, tee, reducer, cross, bend ]
Plastic Ball Pen With Bend Clip Plastic Ball Pen With Bend Clip
Specifications: Plastic ball pen with bend clip
[Related Categories: Pen & Pencil, etc. ]
[Related Keywords: plastic, Ball, Pen, with, bend, clip ]
1/4 Bend 1/4 Bend
Specifications: hublee cast iron soil fitting
[Related Categories: Iron & Steel ]
[Related Keywords: 1/4, bend ]
U-type Bend BL Tube U-type Bend BL Tube
Specifications: We are manufacturer of U-type bend Black ligh tube And other lighting goods(PL, Linear, Auto Bulbs..... )
[Related Categories: Energy Saving & Fluorescent ]
[Related Keywords: U-Type, bend, Bl, tube ]
Ceramic Bend Strength Tester Ceramic Bend Strength Tester
Specifications: Function: To test the bending strength for ceramic tile. Description: Load cell, digital pressure control & display. Twin pressure display mode, safety set up for overload stop or pressure holding while specimen bended. Two major types for mode ct-111 serials, ct-111-400 and ct-111-600, same loading & sensor capacity with different specimen dimension design. Accessory: Stainless collecting tray and case cover.
[Related Categories: Others ]
[Related Keywords: ceramic, bend, strength, tester ]
U Bend Cleaning Machine U Bend Cleaning Machine
Specifications: 1) Quantity of one batch: about 1,800pcs 2) Production capacity: 70 - 90pcs/min JDM Other Price Terms: FOB, CNF, CIF Payment Terms: T/T, L/C at sight Certification(s): ISO9001
[Related Categories: Others ]
[Related Keywords: U, bend, cleaning, machine ]
Molded Bend Parts Molded Bend Parts
Specifications: Such parts are made of the following Materials: Stainless steel;Aluminum;Tin;galvanized Steel sheet;brass;Phosphor Bronze;Beryllium Copper;copper They are widely used in mobile phone, printers, motor etc.
[Related Categories: Precision Parts ]
[Related Keywords: Molded, bend, Parts ]
90-Degree Bend Mould 90-Degree Bend Mould
Mould material: German 1.2316H or Chinese 4Cr13 Other Price Terms: FOB, CIF Payment Terms: T/T, L/C
[Related Categories: Mould ]
[Related Keywords: 90-Degree, bend, mould ]
90 Degree Bend with Sockets 90 Degree Bend with Sockets
The features of molds are high precision, extended service life, short lead time, competitive price, prompt delivery and excellent after-sales service.
[Related Categories: Mould ]
[Related Keywords: 90, degree, bend, with, Sockets ]
90-Degree Bend Mould 90-Degree Bend Mould
With more than 13 years of experiences in plastic mould production, we specialize in plastic pipe, channel, and fitting moulds, adopting the advanced technologies of CAD, CAE and CAM. Hence, our company supplies moulds with high quality and reasonable price.
[Related Categories: Mould ]
[Related Keywords: 90-Degree, bend, mould ]
Circle Bend Pipe Fittings Circle Bend Pipe Fittings
The features of molds are high precision, extended service life, short lead time, competitive price, prompt delivery and excellent after-sales service.
[Related Categories: Mould ]
[Related Keywords: circle, bend, pipe, fittings ]
Bend Glass Bend Glass
Specifications: 1) Tempered or laminated glass 2) Thickness: 4mm ~ 19mm 3) Max. radian: 2,440mm 4) Min. radius: 400mm 5) Max. height : 2,440mm 6) Colors: clear, tea, green, blue, gray Applications: Windows, shower rooms, doors, building materials and so on. Other Price Terms: FOB Tianjin, CIF Payment Terms: T/T, L/C 30% T/T in advance
[Related Categories: Glass ]
[Related Keywords: bend, glass ]
Adjustable Bend Handle Wrench Adjustable Bend Handle Wrench
Features: 1) Adjustable bended handle wrench 2) Dark processing, polished surface 3) Specifications: 6", 8", 10", 12" 4) All kinds of wrenches are available
[Related Categories: Hand Tools ]
[Related Keywords: Adjustable, bend, handle, Wrench ]
Bend Handle Rachet Ring Spanner Bend Handle Rachet Ring Spanner
Features: 1) Bend handle rachet ring spanner 2) Material: carbon steel, electroplated 3) Size: 10" 4) Other types are available
[Related Categories: Hand Tools ]
[Related Keywords: bend, handle, Rachet, ring, Spanner ]
Bend Bend
Features: 1) We can produce all kinds of valve parts, fittings, automobile parts, mechanical parts and alloy castings according to clients' drawings, materials and samples 2) High quality and competitive price 3) Product materials: ductile GGG40-GGG60, gray iron, and alloy casting, mostly according to the standards of ANSI / ASTM, BS, DIN, NF, JIS, and GB 4) We can produce the finished valves also if its clients' request 5) Provides OEM service Galumph Other Price Terms: FOB Shanghai
[Related Categories: Cast & Forged ]
[Related Keywords: bend ]
Air Conditioner Parts With Special-shape Return Bend Air Conditioner Parts With Special-shape Return Bend
Specifications: ID 3/8 DHP copper pipe Many sizes available
[Related Categories: Parts & Accessories ]
[Related Keywords: air, Conditioner, Parts, with, Special-Shape, return, bend ]
1 2 3