• Resets Oil Inspection Light on most major Asian, American and European vehicles
   
• Resets Oil Service Light
   
• Sets Inspection 1 Service Interval
   
• Sets Inspection 2 Service Interval
   
• Sets Inspection Mileage
   
• Resets airbags
   
• Step-by-step on-screen manual reset instructions
   
• Extremely easy-to-use with intuitive navigation
   
• Highly reliable
   
• Ergonomic design
   
• Updateable via internet
   
• Strong housing with protective rubber boot

• USB cable
   
• User’s manual
   
• CD software
   
• Plastic case
   
• Extension cable
   
• OBDII & OBDI connectors

• One tool for multiple purposes
• Deactivates/activates SBC (Sensotronic Brake Control)
• Changes brake fluid/bleeds brake system
• Inspects brake system for air
• Opens/closes the brake pads
• Basic setting of rear brake calipers after changing brake discs & pads
• Reads and clears EPB/SBC trouble codes
• Retrieves ECU information
• Easy to use with step-by-step on-screen instructions
• Multilingual support
• Ensures workplace safety
• Avoids installation errors
• Affordable and reliable
• Easy to update via a USB cable

• MaxiEST™ EST201 tool
• User\'s manual
• USB cable
• Software CD
• Carry case

Specifications:

 PP2000/Lexia-3 Interface works with both Citroen and Peugeot. It is compatible with most of Citroen and Peugeot cars from 1995.But not good for Peugeot 307 and Citroen C5.It support read identification, read fault codes, clear fault codes, auto-scan etc. Multiple language available. 

NEW UPDATE AVAILABLE!!! Update by CD!!!! 
PP2000/LEXIA-3 Interface works for both Citroen and Peugeot!

Compatible Vehicles 
Description:

1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAX O,BX and so on. But please pay attention, according to our customer\'s experience, this item can not works good at C5 new models.

2.It is compatible with most Peugeot cars from 1995,but it can not work good with Peugeot 307 after 2004 year.If you have the two types of cars, please pay attention, please check with us first before purchase. 
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).

Function:

Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).

1.Read identification 
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...

2. Read fault codes 
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure"). 
Program supports report printing or copy to clipboard.

3. Clear fault codes 
this function clears all stored fault codes and other diagnostic information.

4. Auto-scan (complete car scan/test) 
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.

5. Measured Values 
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.

6. Actuator test 
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)

Specification:

1.Hardware and software requirements 
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed. 
If customer requires, we can prepare ready to work PC.

2.Language 
English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech

 Overview 

Introduction for Nissan Consult-IIINissan Motor Co., Ltd., has developed the Nissan CONSULT-III,a handheld diagnostic tester for various in-vehicle electronic systems, with the aim of realizing swift and accurate diagnosis and repairs at Nissan dealerships worldwide. The diagnostic tester will be introduced at Nissan dealerships in Japan and other global markets. The roll-out of the new system will coincide with the introduction of the Skyline sedan in Japan this month, and global markets where the Infiniti G35 will be sold, followed progressively by all other remaining markets as new generation products are introduced. 
Descriptions for Nissan Consult-IIICONSULT-III is the new generation diagnostic system for Nissan and Infiniti vehicles. It is powerful, flexible and easy to use and will transform your ability to provide rapid, accurate service diagnostics for today\'s sophisticated Nissan and Infiniti models and future products good news for both you and your customers.

CONSULT-III is a laptop-based diagnostic system using a Microsoft Windows based user interface. It has a new Hardware platform  laptop PC - and a new Application for diagnostic work.

CONSULT-III supports all Nissan and Infinit vehicles from 1996 to Now.

More Information 

1. Features: 
CONSULT-III offers several major advantages over the current CONSULT-II:

Diagnostic efficiency and accurate repair 
Enhanced diagnosis function to CAN network system 
Downloading of reprogramming data 
Integration of the VR (Vehicle data recorder) function into VI unit 
Enhancement of diagnosis capability for future systems 
Wireless communication (between CONSULT-III and VI/MI units) 
Big screen display-much more information can be displayed on one screen 

2. Standard CONSULT-III Kit Features:

1.  Host

2.  OBD-16 Line

3.  14PIN Line

4.  USB Line

5.  Bluetooth adapte

6.  CD

7.  Carrying Case

3. CONSULT-III OS Requirements

Windows XP (SP2)  or Windows XP (SP3) 

4. CONSULT-III Communication Mode

1.  USB 2.0;

2.  Bluetooth;

5. CONSULT-III Languages

1, English,

2, Finnish,

3, French,

4, German,

5, Greek,

6, Italian,

7, Japanese,

8, Spanish,

9, Chinese(Traditional),

10, Chinese(simplified),

11, Russian.

Features:

1. Diagnostic via CAN and Special functions via K-line.
2. Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
3. Manual definition of running diagnostic session @èà not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
4. Broadcast diagnostic request @èà disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
5. Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
6. Most of popular diagnostic requests @èà identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
7. Special function - odometer correction in instrument clusters and EDC15x.
8. Special function - read Security Access Code/Login WFS.
9. Special function - read/program immobilizer data.
10. Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
11. Special function - VAG MMI TV Activation.
12. Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
13. Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
14. Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
15. Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
16. Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
17. Special function - Crash data clear in airbag units.

Email/MSN: yohotech@hotmail.com. www.yohotech.com. We provide at best price and with good quality.

We have products in stock. We will ship by DHL or UPS in 1-2 business days when the payment is received. We accept payment by Bank Transfer , Western Union, MoneyGram and Paypal.
DHL,UPS(Door To Door Service, Usually no Custom Taxes for buyers)

Features:

(1)BMW Group Tester One (GT1) is specially offered to the BMW workshops & service center with the same specification that is currently supplied to BMW franchised dealers. It is the special-purpose diagnostic and programming tool of ALL BMW Series.
(2)GT1 is supplied with IBM T30 laptop for DIS(Diagnostic and Information System) and SSS(Software Service Station)
(3)GT1 can covers ALL the systems of ALL BMW series cars, It is used to communicate with Electronic Control Unit (ECU) for diagnosis and programming. All the BMW cars with ECU system can be scanned by GT1 system, using DIS, and be programmed using SSS; With GT1 system, you do not need to split all the parts with fault in the BMW car. GT1 help you to read the fault code, and do diagnosis, programming.The BMW GT1 system allows you to reprogram all the BMW car ECUs to fix software or to install a blank ECU to a repaired vehicle. (4)GT1 is the only system that allows you to do this and is absolutely essential if working on Freelander , the GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launched in 2007.
(5)BMW GT1 software kit comprises of five system ,TIS system(Technical Information System).DIS data system(Diagnostic and Information System); diagnosis system .measuring system and management system. You can test and check data information at same time in GT1.

Package List:
(1)GT1 yellow multiplexer head
(2)16 pin OBD-II cable
(3) 20 Pin Diagnostic Cable
(4)LAN cable
(5)DIS Software HDD V43,V49, V50 work with IBM T30 laptop, V51 for IBM T40 laptop.(version optional)
(6)SSS software HDD V22.0, work with IBM T30 laptop;SSS software V26.0 work with Compaq PC,V28 with CD. (version optional)

Good support and service

We are committed to providing good technical support and after sale service as follow,
(1)One year for free update for the software DIS and SSS.

(2)One year warranty for quality of all the components of GT1,
(3)We will provide timely technical support for free by phone or internet for whole life.

Our promise:

We assure that our products are of good quality. Even if any part with problem make OPS unworkable temporarily ( It did not occur before), we will change the new one for you for free.