For construction use, the function of the 3 ply shuttering panel is the same as film faced plywood, in various countries, constructions adopt alternative film faced plywood, shuttering plywood, or 3 ply shuttering panels.
Three Ply Shuttering Panels are made of 3-plywood with a thickness of 9 mm each ply.
The 1st and the 3rd ply grain are arranged at right angles to the second ply.
Glueing is made with high temperatures and pressure.
The moisture content is less than 13%.
Both sides of the panels have a melanimic protection in light yellow colour and alkaline proof and to avoid humidity.
Size: 970 x 500 mm
1000 x 500 mm
1500 x 500 mm
1970 x 500 mm
2000 x 250 mm
2000 x 300 mm
2000 x 500 mm
2000 x 1000 mm
2500 x 500 mm
3000 x 500 mm
4000 x 500 mm
6000 x 500 mm
Thickness: 21mm (3 x 7mm),27mm (3 x 9mm).
Glue: WBP (MUF) / E1.
Sanding: Double faced sanded and Coated.
construction panels, manufactured with a 3 dimensional wire structure in a combination of 2 cover mesh layers interconnected by truss wires, with expanded Polystyrene (EPS)-insulation core. It is a compact line, whose production process takes place in two main phases: 1.) Production of three-dimensional mesh panels from steel coils by means of a fully automatic mesh welder.- Multiple welding machine with CNC-pitch feeding system to produce the flat mesh panels- Multiple bending and welding machine to provide flat meshes with three dimensional rods- Horizontal conveyor to transfer meshes toward assembling machine 2.) Assembling of structural panel by means of an automatic line. It consists of following main units:- Assembling system to press three-dimensional frames into polystyrene core - Multiple welder with CNC-pitch feeding system to weld together structural panels - Automatic stacking device to eject and pile up finished panel outside the line Electric current: 75kW Max. intermittent welding power: 50 kVAWelding current duty cycle: 5 % Air compressor power: 3m 3/ min o.6MpaWidth of panels: 1200 mm Length of panels: min. 2500 mm, longer panels in steps of 00/40mm Insulation core thickness: 100- 40 mmCover mesh: 50 x 50 mm openingsWire diameter: -1.8- -3.8 mm as standard size proposed for load bearing walls, slabs and roofs. Plain wire quality. Also 2 longitudinal plaster runners as V-stamp of 20 mm.Spacer wires: In truss configuration at 100 mm or 200 mm spacing. Wire diameter 3.8 mm galvanized wire quality. Insulation core: EPS, destiny approx. 15 –20 kg/m3 100 mm - 40 mm thickness. Output speed : Based on a 300 working days per year, each with 8 hours and assumed efficiency factor of 60 % (depending on local conditions), this results in a max. net output of pprox.300.000 m2 per year and per one working shift on a thus step of 200 mm and in a max. net output of approx. 220.000 m2 per year and per one working shift on a truss step of 100 mm. Hard drawn wire for cover mesh and for splice mesh:3 mm diameter, minimum yield strength of 500 to 550 N/mm2, maximum carbon contend 0.15 %, clean wire surface, no rust, reuse, oil, paint or drawing compounds to insure smooth flow of the welding current. Galvanized wire for spacer (truss) wires:3.8 mm diameter, minimum yield strenth of 700 N/mm2, maximum carbon content 0.15 %, clean wire surface and uniform zinc coating
AEEF series motor is three-phase ,totally enclosed and fan-cooled electric motor with squirrel cage, IP54 insulation, Class B ( other voltages and cycles or insulation Class F are available if request. )
Ambient temperature: -15¡æ¡Ü¦È¡Ü40¡æ Above sea level: not exceed 1000m Rated voltage: ¡À5%
AEEF series motors conform to IEC standard. widely used in industrial or agricultural field
IP54, F class, IC0141 Cast iron, TEFC Formosa style, tropic-proof Silent operation Smooth start torque.
Three phase, MS series Aluminum housing motors are acknowledged that having a good fame for quality and reliability, they are suitable for driving machines which do not have special requirement, such as machine tools, pumps, blowers etc.
Ambient temperature: -15¡æ¡Ü¦È¡Ü40¡æ Above sea level: not exceed 1000mRated voltage: ¡À5%
The MS series aluminum housing three-phase asynchronous motors are the latest design and are made of selected quality materials and conform to the international IEC standard.MS motors have a very safe and reliable performance, are attractive in appearance and can be easily maintained. They have low noise with little vibration but at the same time are light weight and of simple construction. The MS series motors can be used for general electric motor applications.