Add New Product | My Products | Free Product Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "Soles Adhesive"
advertisements
Rubber Soles Bicomponent Adhesive Rubber Soles Bicomponent Adhesive

Rubber Soles Bicomponent Adhesive used for RUBBER SOLES for application of NATURAL RUBBERS.High bond strenght. It is also used for general processing of the shoe. It must be used with a 5% of ACTIVATOR. CHARACTERISTICS : Viscosity : 2800 +/- 100 cPs Opened Time : 15 - 30 Minutes USING INSTRUCTIONS : Apply an homogeneous coat upon the two parts has to be stickked, let them dry for at least 10 - 15 minutes and join the two parts with hands, hammer or with a press. To dilute the PRODUCT, use SOLVENT P or SOLVENT M. After the mix between the glue and the activator , the glue has a life of 2 hours more or less. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 15 - Kg 9 Kg 4 - Kg 1  

[Related Categories: Adhesives & Sealants ]
[Related Keywords: rubber adhesive, Soles Adhesive, Bicomponent Adhesive ]
Monocomponent Polyurethane Adhesive for Sticking Leather On Soles Monocomponent Polyurethane Adhesive for Sticking Leather On Soles

POLYURETHANE ADHESIVE WITH MEDIUM-HIGH VISCOSITY
Neoplastic ABR is a monocomponent polyurethane adhesive suitable for sticking leather
and synthetic materials on soles
. It can be reactivated at about only 50° C.
It is possible to increase performances adding activator Desmodur (5%).
High Crystallization PECULIARITY: RIACTIVATION AT 40°C CHARACTERISTICS : Viscosity : 2800 +/- 100 Cps Reactivation : 40/50°C USING INSTRUCTIONS : Mix very well the adhesive. Apply an homogeneous coat upon the two parts has to be stickked, wait for 20/25 minutes and then reactivate the adhesive at a temperature of 40/50°C and then press the two parts. In case of materials very oly or absorbent we advise to use our PRIMER-HP as a first hand. PREPARETAION OF THE SOLES : LEATHER SOLES : No preparation TR SOLES : Wash the soles with PRIMER-FAC RUBBER SOLES : Card the soles and wash them with PRIMER-FAC PU SOLES : Card the soles TUNITH SOLES : Wash the soles with PRIMER-FAC The adhesive can be improved with addition of ACTIVATOR RFE, RN, RC or E 462 5/6 % weight. In this case the adhesives has to be used in 60/90 Min. ATTENTION : With temperature near to 0°C the product freezes but to bring at its original conditions it doesn't show any problem and can be used without problems. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 20 - Kg 10 Kg 5 - Kg 1.

[Related Categories: Adhesives & Sealants ]
[Related Keywords: Polyurethane Adhesive, Leather adhesive, Soles Adhesive ]
advertisements
Water Based Polyurethan Adhesive for Soles Footwear Industry Adhesives Water Based Polyurethan Adhesive for Soles Footwear Industry Adhesives

WATER DISPERSION ADHESIVE WITH LOW VISCOSITY AND HIGH RESISTANCE TO HEAT
The IDROTEX 200 is a water based polyurethan adhesive used for sticking of synthetics on soles of different materials changing only the preparation of the soles. By spraying. High Crystallization CHARACTERISTICS : Viscosity : 200 / 250 Mpa Reactivation : 50/55 °C USING INSTRUCTIONS : Mix very well the adhesive. Apply an homogeneous coat upon the two parts has to be stickked, wait for the evaporation of the water and then reactivate the adhesive at a temperature of 50/55°C and then press the two parts. PREPARETAION OF THE SOLES : LEATHER SOLES : No preparation TR SOLES : Wash the soles with PRIMER-FAC RUBBER SOLES : Card the soles and wash them with PRIMER-FAC PU SOLES : Card the soles TUNITH SOLES : Wash the soles with PRIMER-FAC The adhesive can be improved with addition of ACTIVATOR DN in 5/6 % weight. In this case the adhesives has to be used in 60/90 Min. ATTENTION : With temperature near to 0°C the product freezes and can no more be used. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 20 - Kg 10 Kg 5 - Kg 1.

[Related Categories: Adhesives & Sealants ]
[Related Keywords: Water Based Adhesive, Polyurethan Adhesive, Soles Adhesive, Footwear Industry Adhesives ]
Extra Strong Leather Soles Adhesive Polychloroprene Extra Strong Leather Soles Adhesive Polychloroprene

EXTRA STRONG POLYCHLOROPRENE ADHESIVE WITH MEDIUM HIGH
VISCOSITY
CU 1000 is a polychloroprene adhesive for shoe industry, specially formulated to stick, leather
soles, crust, ecc. High heat resistance. High quality. Brush application

[Related Categories: Adhesives & Sealants ]
[Related Keywords: Leather adhesive, Soles Adhesive ]
1
Scroll