Add New Sell Offer | My Sell Offers | My Sell Offers | Free Offer Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "Silicone"
advertisements
 pad printing silicone rubber pad printing silicone rubber

1.pad printing silicone rubber Application:
pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
 
2.pad printing silicone rubber Description:
 
pad printing silicone rubber has the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
3.pad printing silicone rubber Instruction:
 
Pad printing silicon rubber is two-component silicon, part A is the liquid silicon rubber, part B is the catalyst. The usual mixing ratio for silicon rubber and catalyst is 100:2-3, eg. We take 100grams of liquid silicon rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.
 
4.pad printing silicone rubber  Frequently asked question:
 
The reasons why the silicone pad has a short service life are listed as follows:
 
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags. 
 
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad. 
 
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
 
Why liquid silicone rubber for pad printing is incomplete or not clear?
 
(1)If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing. 
(2)If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.

For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
E-mail:hyjxrh@szrl.net
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, pad printing silicone rubber, silicone pad ]
 Silicone rubber for shoe mold making Silicone rubber for shoe mold making

1.silicone rubber for shoe mold making Application:
 
silicone rubber for shoe mold making is mainly used for shoe molds, sand casting, Shoe soles mold, sand casting,brushing mold,plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
 
2. silicone rubber for shoe mold making Specification: 
a.Two-component silicone rubber with tin-catalyst
b.Cured under room temperature
c.low shrinkage
d.excellent fexibility & easy demould

3.Silicone rubber for shoe mold making Using Instruction:  
 
The component A of silicone rubber for shoe mold making is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for  mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
 
4.silicone rubber for shoe mold making Frequent asked question:

 How to make an outer mold?
One is to enclose the mold by a plastic plate or wooden plate , then pour into the liquid plaster to fill the mold frame. Another is brushing or coating  a layer of resin and  then pasting a fiber glass, then repeatedly brushing and pasting one more time, then a outer mold will be finished for 3 layer same process 
For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
E-mail:hyjxrh@szrl.net
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, shoe mold making, Silicone rubber for shoe mold making ]
advertisements
 silicone rubber for coating textile silicone rubber for coating textile

1.silicone rubber for coating textile Application:
 
silicone rubber for coating textile is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
 
2.silicone rubber for coating textile Specification:
 
1) long working time during room temperature,
2) Vulcanizing quickly under high temperature,
3) Non heavy metal and solvent, non-toxic and innocuity to human body.
4) Excellent third dimension and softness after using the silicone rubber to the textile.

3.silicone rubber for coating textile Operation guideline:
 
1) Stirring A and B to uniformity before using.
2) Mixing A and B component according to A: B = 1:1 by weight or volume, coating the mixture on the textile or socks.
3) Baking the textile or socks in drying oven for 1-3min.
 
4.silicone rubber for coating textile Shelf life:
 
8-10 months when stored under 24°C in original unopened packages.

For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
E-mail:hyjxrh@szrl.net
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, silicone rubber for coating textile ]
 RTV addition cure silicone rubber for life casting RTV addition cure silicone rubber for life casting

1.Application of RTV addition cure silicone rubber for life casting:
 
RTV addition cure silicone rubber for life casting mainly applys to making toys , bra, mask ect, and also can be make nipples, glass, and other kinds of molds.
 
2.Features of RTV addition cure silicone rubber for life casting:
 
RTV addition cure silicone rubber for life casting can be used for a long period and maintain softness and elasticity within a temperature range of -65°C ~ 200°C with the characteristics of excellent electrical performance and chemical stability, waterproof, ozone and climate resistance, non-corrosiveness, physical inertia, non-toxic, odourless, low linear shrinkage, easy operation, etc
3.Operation of RTV addition cure silicone rubber for life casting:
 
Mixing the part A with part B evenly according to the proportion of 1:0.951.05, and can be poured after degassing , with pot life 0.51H, it will be cured in about 10 minutes when heating up the temperature to 80120 .The pot life of  room temperature fast curing is less than 30 mins ,and the curing time is 2 hours. The color can be changable according to the customers' requiry . 
 
4.Notice of RTV addition cure silicone rubber for life casting:
 
a. This product need to be packed in clean, dry and sealed steel cans or drums. Part A and B need to be packed seperately. Usually it is packed in 5kg/can, 20 kg/drum, or 200 kg/drum .
b. Please keep the material in a cool and dry place. Specially note that the silicone should not touch or mix with compounds including nitrogen, phosphorus, sulfur, tin, lead or metal organic acid. Otherwise, the catalyst will be poisoned, then the silicone can not be cured or just particially cured. For specific precautions, please refer to the instructions in Electronic Potting Silicone part.
c. The goods is NOT subject to IMDG.The shelflife is 18 months from the date of production.And it still can be used after expired, when retest to be qualified.
 
5.Precautions of RTV addition cure silicone rubber for life casting:
 
RTV addition cure life casting silicone rubber is platinum-catalyzed silicone rubber, water, impurity, organic tin catalyst, acid, alkaline and other organisms containing sulfur, phosphorus and nitrogen will influence the vulcanization of the silicon rubber. So, please do not mix with or touch those substances during using.
For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
E-mail:hyjxrh@szrl.net
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, life casting, RTV addition cure silicone rubber for life casting ]
advertisements
 RTV molding silicone rubber for plaster products RTV molding silicone rubber for plaster products

1.RTV molding silicone rubber for plaster products application:
 
RTV molding silicone rubber for plaster products with 30 shore A, is specially suitable for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.
 
2. RTV molding silicone rubber for plaster products feature:
 
(1) RTV molding silicone rubber for plaster products with SGS and ROSH approval
(2) Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5)Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample orders are available

3.RTV molding silicone rubber for plaster products operation way:  
 
Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping.Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
 
4.RTV molding silicone rubber for plaster products frequently asked question:
 
Why is the silicone rubber mold oily?
Basically, molding silicone rubber doesn't contain any oil, so it won't be oily. The reasons for the oily molds can be deducted from the below 3 factors:
 
1. Added white oil, which is the compound of silicone oil and white oil. The white oil is not silicone oil but a kink of petrochemicals;
 
2. Added too much silicone oil. Normally, we donot advise our customers to add any silicone oil into silicone rubber. If necessary, the ratio must be 5%-10%;
 
For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
E-mail:hyjxrh@szrl.net
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, molding, RTV, RTV molding silicone rubber for plaster products ]
 pad printing silicone rubber pad printing silicone rubber

1.pad printing silicone rubber Application:
pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber as a carrier which transfers patterns on the steel plate to the toys products surface.
 
2.pad printing silicone rubber Description:
 
pad printing silicone rubber has the advantages of abrasion resistance, high temperature resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Dupont Teflon high-temperature resistance new material, is processed through high-temperature machining.
3.pad printing silicone rubber Instruction:
 
Pad printing silicon rubber is two-component silicon, part A is the liquid silicon rubber, part B is the catalyst. The usual mixing ratio for silicon rubber and catalyst is 100:2-3, eg. We take 100grams of liquid silicon rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.
 
4.pad printing silicone rubber  Frequently asked question:
 
The reasons why the silicone pad has a short service life are listed as follows:
 
(1)The problem caused by inappropriate filtration of silicone rubber, and impurities in the packaging process due to the uncleanness of barrels and bags. 
 
(2)The short service life of the silicone pad has a close relationship with the adding amount of silicone oil. The more the silicone oil added, the softer the silicone pad will be. The silicone oil will destroy the molecule of the silicone rubber, thereby bringing about the non-durable and easy ageing of the silicone pad. 
 
(3)All the users should know the properties of pad printing silicone rubber. The service life of the silicone pad has close relationship with the size of the printed patterns. For example, if a big pattern to be printed, a big silicone pad is required; if a small pattern to be printed, a small silicone pad (the silicone pad has to be adjusted according to the size of the patterns, and the proportion between the size of the silicone pad and the pattern is 3:1.)
 
Why liquid silicone rubber for pad printing is incomplete or not clear?
 
(1)If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing. 
(2)If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.

For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, pad printing silicone rubber, silicone pad ]
advertisements
 Silicone rubber for shoe mold making Silicone rubber for shoe mold making

1.silicone rubber for shoe mold making Application:
 
silicone rubber for shoe mold making is mainly used for shoe molds, sand casting, Shoe soles mold, sand casting,brushing mold,plaster models, simple products, products with non-complex patterns, as well as product models with stable size and non-deformation.
 
2. silicone rubber for shoe mold making Specification: 
a.Two-component silicone rubber with tin-catalyst
b.Cured under room temperature
c.low shrinkage
d.excellent fexibility & easy demould

3.Silicone rubber for shoe mold making Using Instruction:  
 
The component A of silicone rubber for shoe mold making is white flowing liquid and the component B is the curing agent. For example, take silicone rubber of 100g and add 2% curing agent for  mixing evenly. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for deairing to remove the bubbles. After deaired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.
 
4.silicone rubber for shoe mold making Frequent asked question:

 How to make an outer mold?
One is to enclose the mold by a plastic plate or wooden plate , then pour into the liquid plaster to fill the mold frame. Another is brushing or coating  a layer of resin and  then pasting a fiber glass, then repeatedly brushing and pasting one more time, then a outer mold will be finished for 3 layer same process 
For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, shoe mold making, Silicone rubber for shoe mold making ]
 silicone rubber for coating textile silicone rubber for coating textile

1.silicone rubber for coating textile Application:
 
silicone rubber for coating textile is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
 
2.silicone rubber for coating textile Specification:
 
1) long working time during room temperature,
2) Vulcanizing quickly under high temperature,
3) Non heavy metal and solvent, non-toxic and innocuity to human body.
4) Excellent third dimension and softness after using the silicone rubber to the textile.

3.silicone rubber for coating textile Operation guideline:
 
1) Stirring A and B to uniformity before using.
2) Mixing A and B component according to A: B = 1:1 by weight or volume, coating the mixture on the textile or socks.
3) Baking the textile or socks in drying oven for 1-3min.
 
4.silicone rubber for coating textile Shelf life:
 
8-10 months when stored under 24°C in original unopened packages.

For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, silicone rubber for coating textile ]
advertisements
 RTV addition cure silicone rubber for life casting RTV addition cure silicone rubber for life casting

1.Application of RTV addition cure&nbs p;silicone rubber for life casting:

 

RTV addition cure silico ne rubber for life casting mainly&nb sp;applys to making toys , bra,  ;mask ect, and also can be make  nipples, glass, and other kinds&nbs p;of molds.

 

2.Features o f RTV addition cure silicone rubber& nbsp;for life casting:

 

R TV addition cure silicone rubber for  life casting can be used for&n bsp;a long period and maintain softn ess and elasticity within a temperat ure range of -65°C ~ 200°C&n bsp;with the characteristics of excellent  electrical performance and chemical  ;stability, waterproof, ozone and climate  resistance, non-corrosiveness, physical  inertia, non-toxic, odourless, low linear  shrinkage, easy operation, etc

3.Operation of RTV addition cure si licone rubber for life casting:

 

Mixing the part A with& nbsp;part B evenly according to the& nbsp;proportion of 1:0.951.05, and can&nb sp;be poured after degassing , with& nbsp;pot life 0.51H, it will be  ;cured in about 10 minutes when  ;heating up the temperature to 80120  .The pot life of  room te mperature fast curing is less than&n bsp;30 mins ,and the curing time&nbs p;is 2 hours. The color can be& nbsp;changable according to the customers ' requiry . 

 

4. Notice of RTV addition cure silicone  rubber for life casting:

  ;

a. This product need to  be packed in clean, dry and sea led steel cans or drums. Part A  and B need to be packed s eperately. Usually it is packed in&n bsp;5kg/can, 20 kg/drum, or 200 kg/d rum .

b. Please keep the m aterial in a cool and dry place . Specially note that the silicone&n bsp;should not touch or mix with&nbs p;compounds including nitrogen, phosphorus,&nb sp;sulfur, tin, lead or metal organi c acid. Otherwise, the catalyst will  be poisoned, then the silicone  ;can not be cured or just parti cially cured. For specific precautions,&n bsp;please refer to the instructions  ;in Electronic Potting Silicone part.

c. The goods is NOT subject&n bsp;to IMDG.The shelflife is 18 mont hs from the date of production.And&n bsp;it still can be used after  expired, when retest to be qualified .

 

5.Precautions of RTV&n bsp;addition cure silicone rubber for&nbs p;life casting:

 

RTV addi tion cure life casting silicone rubb er is platinum-catalyzed silicone rubber,  water, impurity, organic tin cataly st, acid, alkaline and other organis ms containing sulfur, phosphorus and  ;nitrogen will influence the vulcanizatio n of the silicon rubber. So, pl ease do not mix with or touch&n bsp;those substances during using.

F or more information of Silicone Rubb er, pls feel free to contact Ms . Tracy Xu:

Tel: +86-0755-89948294

FAX: +86-0755-89948030

Skype: si licone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, life casting, RTV addition cure silicone rubber for life casting ]
RTV molding silicone rubber for plaster products RTV molding silicone rubber for plaster products

1.RTV molding silicone rubber for plaster products application:
 
RTV molding silicone rubber for plaster products with 30 shore A, is specially suitable for plaster decoration duplication,gypsum sculpture reproduction,duplicating resin product with fine details,PU resin reproduction,wax molding,stone duplication ,epoxy moulds,pacrylic moulding,reproducing polyester craft.
 
2. RTV molding silicone rubber for plaster products feature:
 
(1) RTV molding silicone rubber for plaster products with SGS and ROSH approval
(2) Curing agent arrange together as free charged
(3) In liquid form and in various colors
(4) With an exceptional fluidity and good operability.
(5)Temperature and deformation resistance as well as low shrinkage.
(6) High duplication times.
(7) Sample orders are available

3.RTV molding silicone rubber for plaster products operation way:  
 
Step One:Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.
Step Two: vacuum pumping.Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 mins , otherwise, once the silicone rubber has cross-link reaction during vacuumizing, it will not be operated.
Step Three: Brushing cast & Perfusion Molding operation
 
4.RTV molding silicone rubber for plaster products frequently asked question:
 
Why is the silicone rubber mold oily?
Basically, molding silicone rubber doesn't contain any oil, so it won't be oily. The reasons for the oily molds can be deducted from the below 3 factors:
 
1. Added white oil, which is the compound of silicone oil and white oil. The white oil is not silicone oil but a kink of petrochemicals;
 
2. Added too much silicone oil. Normally, we donot advise our customers to add any silicone oil into silicone rubber. If necessary, the ratio must be 5%-10%;
 
For more information of Silicone Rubber, pls feel free to contact Ms. Tracy Xu:
Tel: +86-0755-89948294
FAX: +86-0755-89948030
Skype: silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, molding, RTV, RTV molding silicone rubber for plaster products ]
advertisements
 Addition cure silicone rubber for tire mold Addition cure silicone rubber for tire mold

1.Addition cure silicone rubber for tire mold making application:
 
Addition cure silicone rubber is primarily intended for tires making , and can be used for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry,a large statue Buddha, furniture, furniture decorative materials, statues  Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 
 
2.Addition cure silicone rubber for tire mold making description:
 
Addition cure silicone rubber is white or red flowing liquid with general  hardness of 22-50A°after curing. Molding silicon rubber is a kind elastic  silicon rubber mold which features with resistance to deformation, high- temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation.

3.Addition cure silicone rubber for tire mold making operation:
 
a. Pls clear the model and tool totally before operation to prevent cure inhibition.
b.Weigh the two part correctly by electronic weight in two separate container .
c. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
d.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3 minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly down the side of the mold frame so that less bubbles caused)
e. Enclose the product (the original model) with four plastic plates or wooden plates.
f. Clean your products and brush a layer of release agent(detergent or soap water)
 on your product.
g. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Need any help on silicone rubber, please feel free to contact Ms Tracy:
 
Tel:86-0755-89948294
Mob:86-18938867593
e-mail: hyjxrh@szrl.net
Skype:silicone011

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber, molding, Addition cure silicone rubber for tire mold ]
 High Voltage Insulating Silicone Rubber High Voltage Insulating Silicone Rubber

Property

Good aging and ozone resistance

Good corona and arc resistance

Easy mold release

Suitable temperature

 

Typical Application

High voltag insulator

Arrestor

Heat press mould

 

[Related Categories: Rubber & Products ]
[Related Keywords: silicone rubber, Silicone, rubber ]
advertisements
 gaskets and seals gaskets and seals

We can produce a diverse range of oil seal to meet your particular application.

Range of temperature:

1. Polyurethane: -22 to 230oF or -30 to 110oC.

2. Nitrile Rubber: -22 to 210oF or -30 to 100oC.

3. EPDM Rubber: -49 to 300oF or -45 to 150oC.

4. Silicone Rubber: -75 to 392oF or -60 to 200oC.

Material:

Nitrile (NBR), Viton, Fluorocarbon (FKM), Silicone (VMQ), Neoprene®, Chloroprene (CR), Ethylene Propylene (EPDM), Styrene Butadiene Rubber (SBR), Hydrogenated Nitrile (HNBR).

 

EPDM seals are most commonly used with the following media:

1. Hot /Cold Water, Steam

2. Freon

3. Air 

[Related Categories: Rubber & Products ]
[Related Keywords: oil seals, gaskets, o-rings, EPDM, Ptfe, VITON, Silicone ]
 sell silicone rubber sell silicone rubber
 

 

We are the leading silicone rubber compound manufacturer in China, providing HTV silicone gum, RTV(silicone sealant for PV modules), LSR(Liquid Silicone Rubber).

 

Our products have got many international certifications such as UL , TUV , SGS , FDA , LFGB and so on.

You can visit our website for more detailed information.

[Related Categories: Rubber & Products ]
[Related Keywords: Silicone, silicone rubber, silicone rubber compound, HTV, RTV, LSR, molding, Extruding, Fumed ]
advertisements
 Silicon rubber for manual mold design Silicon rubber for manual mold design

 

Applications of Silicon rubber for manual mold design
Silicon rubber for manual mold design is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
 Silicon rubber for manual mold design features
Silicon rubber for manual mold designis white or red flowing liquid with general hardness of 22-50A°after curing with features ------
(1) Low linear shrinkage 
(2)resistance to high-temperature
(3) resistance to deformation
(4)resistance to acid-alkali and expansion
(5) Environmental friendly silicone
 
 
During operate of silicon rubber for manual mold the three impotant thing to pay attention :
 1. weigh theliquid silicone rubber and curing agent exatly .
 2. Stir theliquid silcone rubber and curing agent evenly .
 3.we shouldchoose the right hardness to making diffirent size of product mold.
 
Operation Instruction of  silicon rubber for manual mold:
1. The manual mold silicon is applied to small products or products with fine patterns. The mold  for the fine detailed and small products should be made of soft silicon to protect the products from easy breaking when demoulding.
2. If large product duplication or fabrication, the mold should be made of higher hardness silicone rubber so that the products made will not deform.
 
 
Any more information , pls feel free to contact Ms Shirley
also call office no. 0086-755-89948019
Mob:86-18938867596
Skype: patch8826
Email :hyh(at)szrl(dot)net 
Welcome to our website www dot szrl dot net
 
 
[Related Categories: Rubber & Products ]
[Related Keywords: rtv silicone, Silicone, Silicon rubber for manual mold design ]
Pad Printing Silicon Rubber Pad Printing Silicon Rubber

 

 
Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.
.
 
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.  
.
Pad Printing Silicon Rubber Operation Instructions: 
.
Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.g. we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. A fter 2-4 hours, you will get a Pad printing silicone rubber.
.
 
.
For get further information,pls contact with Miss Shirley
TEL: 0086-755-89948019 or  hyh(at)szrl(dot)net
Mobile: 0086-18938867596
Welcome to visit www (dot)szrl (dot)net anytime .
 
[Related Categories: Rubber & Products ]
[Related Keywords: molding silicone, Silicone, pad printing silicon rubber ]
advertisements
 RTV silicone rubber RTV silicone rubber

 

RTV silicone rubber brief introduction
 
& lt; span> 
1.     RTV silicone rubber can be used for Decoration building mould making, including column, porch column, interior column etc
 
& lt; span> 
3.     RTV silicone rubber is used forConcrete decoration, garden statue ,plant, sculpture, Buddha and animal crafts ..
 
Features of RTV silicone rubber :
RTV silicone rubber is white or red flowing liquid with general hardness of 22-50A°after curing with features ------
(1)high tensile & tear strength 
(2) high duplication times
(3) Low linear shrinkage 
(4)resistance to high-temperature
(5) resistance to deformation
(6)resistance to acid-alkali and expansion
 
Attention for using RTV silicone rubber
Usually , we do not suggest customer to add silicone oil to the silicone to adjust the shore A. If necessary, we would suggest to add as 5% silicone oil.
 
Any more information , pls feel free to contact Ms Shirley
Email :hyh(at)szrl(dot)net 
office no. 0086-755-89948006
Mob:86-18938867596
Skype: patch8826
MSN zxqnl@live.cn& lt; /div>
Welcome to our website www dot szrl dot net
 
[Related Categories: Rubber & Products, Rubber & Products ]
[Related Keywords: molding silicone, liquid silicone, Silicone, RTV silicone rubber ]
Sell reusable silicone ear plug / disposable foam earplugs Sell reusable silicone ear plug / disposable foam earplugs

Keywords: hearing protection earplug, hearing protector, reusable silicone ear plug, disposable foam ear plug, corded ear plug, uncorded ear plug

 

Details: Arland Safety Products is a China ear plug manufacturer/ supplier/ vendor/ exporter. These ear plugs are used for hearing protection from industrial noise workplace by reducing noise exposures. The earplugs are made of foam, rubber, silicone or wax. Arland ear plug line includes disposable foam ear plug and reusable silicone ear plug. All the ear plugs are practised for high performance, comfort, and quality. Corded earplugs and uncorded earplugs are available. There are Multiple packing methods for earplugs for you choose. Our ear plugs are also the ideal gift for bed partners, roommates, swimmers, musicians, motorcyclists, students, military person.

 

Arland has developed a full line of industrial safety products including industrial work glove, safety helmet / hard hat, safety goggle & glasses, face shield, ear muff, ear plug, etc. Our price is very competitive. We would like to be your most favorable china source of industrial supplies.

 

For more information, we would like you to visit our company website.
[Related Categories: Safety Products ]
[Related Keywords: uncorded ear plug, corded ear plug, disposable foam ear plug, reusable silicone ear plug, hearing protector, hearing protection earplug, Sell, Sell, reusable, reusable, Silicone, Silicone, ear, ear, plug, plug, disposable, disposable, foam, foam, Earplugs, Earplugs ]
advertisements
Sell reusable silicone ear plug / disposable foam earplugs Sell reusable silicone ear plug / disposable foam earplugs

Keywords: hearing protection earplug, hearing protector, reusable silicone ear plug, disposable foam ear plug, corded ear plug, uncorded ear plug

 

Details: Arland Safety Products is a China ear plug manufacturer/ supplier/ vendor/ exporter. These ear plugs are used for hearing protection from industrial noise workplace by reducing noise exposures. The earplugs are made of foam, rubber, silicone or wax. Arland ear plug line includes disposable foam ear plug and reusable silicone ear plug. All the ear plugs are practised for high performance, comfort, and quality. Corded earplugs and uncorded earplugs are available. There are Multiple packing methods for earplugs for you choose. Our ear plugs are also the ideal gift for bed partners, roommates, swimmers, musicians, motorcyclists, students, military person.

 

Arland has developed a full line of industrial safety products including industrial work glove, safety helmet / hard hat, safety goggle & glasses, face shield, ear muff, ear plug, etc. Our price is very competitive. We would like to be your most favorable china source of industrial supplies.

 

For more information, we would like you to visit our company website.
[Related Categories: Safety Products ]
[Related Keywords: uncorded ear plug, corded ear plug, disposable foam ear plug, reusable silicone ear plug, hearing protector, hearing protection earplug, Sell, Sell, reusable, reusable, Silicone, Silicone, ear, ear, plug, plug, disposable, disposable, foam, foam, Earplugs, Earplugs ]
Sell silicone bracelet Sell silicone bracelet

Features:

1) Material: 100% silicone

2) Beautiful designs

3) Different patterns and sizes are available

4) Durable and long-lasting
[Related Categories: Promotion Gifts, Watch Bands, Straps & Bracelets ]
[Related Keywords: silicone bracelet, Sell, Sell, Silicone, Silicone, bracelet, bracelet ]
1 2 3 4 5 6 7 8 9 10  >> 
Scroll