Non-toxic Calcium/Zinc stabilizer complex is the new high-tech ecological products. It is made according to ROHS of EU without banned chemical and heavy metals such as lead, barium, cadmium, mercury, etc.
Ca/Zn stabilizer complex is in white powder, characterized as highly effective and non-toxic plastic heat stabilizer with good dispersion, internal and external lubrication and excellent anti-seperation performance. The product has well stability, good capability of coloring up in early period of staining, effectively resistant to pollution of sulfuration and weather, etc. It can obviously improve the processing property and make colored products much brighter when used together with epoxidized soybean oil and organic phosphite, etc.
The product can be widely used in PVC door and window profiles, PVC water pipe, PVC Wire & Cable, children's toys, interior decoration materials, etc.
Wire & Cable
Ca/Zn Content %
2.6 – 4.8
4.5 – 6.0
8.5 – 12.0
4.0 – 6.0
Heating Loss %
1.5 - 3.5
Melting Point °C
93 - 105
20 Kg/bag with outside pp weaving bag and inside PVC bags.
1.Formula: Mg(C 17 H 35 COO) 2
2.Properties: The product is white powder, innoxious, insipid and
uncombustible. It can be dissolved in hot alcohol but not in water
or ether. It is easily decomposed by dilute acid.
3.Use: The product is used as lubricating drawing agent for the
tablets. It is also used as compound for cosmetics, PVC stabilizer
or paint dryer if it is used together with Ca Soap and Zn Soap.
MgO % 7.0 ± 0.5
Heating loss % ≤ 5.0
Cl - % ≤ 0.15
SO 4 2- % ≤ 0.6
Fe 3+ % ≤ 0.01
high metals PPM ≤ 15
20kg/bag with outside pp weaving bag or kraft paper bag and inside-bis-PVC bag.
1ï¼Ž Formula :
(C 17 H 35 COO) 2 AlOH
The product is white powder.
The product is used as PVC innoxious hot stabilizer. It is also
used as rust inhibitor, building materials, waterproof agent, paint and
printing ink thickener and cosmetic emulsifier, etc.
4ï¼Ž Quality Standard:
Al 3+ % 4.0 ~ 5.2
Heating loss % ≤ 1.5
Free acid (C 17 H 35 COO - ) % ≤ 5.5
Melting point °C 155 ~ 170
Through 200 mesh % ≥ 99.0
25kg/bag with pp weaving bag outside and PE plastic bag inside.
1. Formula: Zn(C 17 H 35 COO) 2
Zinc stearate is white or light yellow powder. It is dissolved
in hot alcohol; but not in water. It can be decomposed into
stearic acid and corresponding salt by strong acid. The product
possessed water absorbability in air.
The product is used as PVC stabilizer, rubber lubricant,
glazing agent, paint flatting agent and cosmetic material in the
textile industry, etc.
4. Quality standard:
Zn 2+ % 10.7 ± 0.5
Free acid (C 17 H 35 COO) 2 2- %
Melting point °C
Heating loss %
Size (through 75μm sieve) %
20kg/bag with outside pp weaving bag and inside plastic bag.
Ca (C 17 H 35 COO) 2
Calcium stearate is white or light yellow powder. It is
dissolved in hot alcohol and ether but not in water, and can be
decomposed into stearic acid and corresponding salt by strong
acid. It has water absorbability in air.
The product is used as PVC innoxious stabilizer,
water-proof powder, paint polish and polish oil extender, etc.
4. Quality Standard:
Ca 2+ % 6.5 ± 0.6
Free acid (C 17 H 35 COO) 2 2- % ≤ 0.5
Heating loss % ≤ 3.0
Melting point °C ≥ 140
Size (through 75μm sieve) % ≥ 99.5
20kg/bag with outside pp weaving bag and inside bis -PVC bags
JX-05 Series special for P VC panel:
Introduction: JX-05 series products are lead based&n bsp;compound stabilizer containing light Lead  ;based compound, antioxidant, internal an d external lubricants, which is appl icable for U-PVC panel extrusion. It is irregular flake or granule and du st-free.
Product performance: This series product has good ther mo stability and processing performance,& nbsp;reasonable formulation. It has excellent internal and ext ernal lubricating balance; do not ne ed any more lubricant. It contains&n bsp;proper composite antioxidant and macr omolecule auxiliaries, which can obviousl y improve the mechanical property an d surface quality of PVC panel.
Technical data and reference feed  ;rate:
White /yellow, Flake
Lead oxide content，%
Initial melting point，℃
Reference feed rate （phr）
JX-03 Series special for PVC  ;profile:
Introduction: JX-03 series products are lead based co mpound stabilizer containing light Lead  ;based compound, antioxidant, internal an d external lubricants, which is appl icable for U-PVC profile extrusion. It is irregular flake or granule and du st-free. It contains proper composite&nbs p;antioxidant and macromolecule auxiliaries,&n bsp;which can obviously improve the outdoor using perfor mance of plastic profile products, a nd completely adapt for all kinds&nb sp;of PVC profile production under t he GB/T 8814-2004 standard.
Product performance: JX-03 series products have good thermo stability and processing performance, str ong anti-seperation performance, reasonable&nb sp;formulation, effectively resistant to climate, strong weld angle and low&n bsp;temperature impact performance. It is completely adapt for different proc essing extrusion equipments at home or abroad.
Appearance Clear liquid
Color scale (Pt-Co #) ≤80
Density (20°C,g/cm3) 1.07-1.09
Viscosity (25°C,pa.s) 0.012-0.020
ED-1318 has excellent high-temperature color stability, long-term dynamic stability and best cost performance . The product is high efficient and environment-friendly without any heavy metal. It can be used to produce PVC pipe with big caliber owing to the good heat stability. Without fouling, the time of cleaning equipment is shortened.
ED-1318 is used in various kinds of pipes, such as PVC-M highly impact pipes, drinking water or drainage pipes,double-wall corrugated pipes, etc. It is also good for rigid sealed strips.
Package, Storage & Transportation
N.W. 220Kg in iron or plastic drum. Kept in a dry ventilated place and avoid sunlight. The expiration period is one year. It is non-flammable and non-explosive. Handle and transport in accordance with general regulations.
Dibasic Lead Phosphite(DLP)
Dibasic Lead Phosphite (Diphos) ;is produced and supplied as a fine white or slightly brown powder. With a lead (Pb) c ontent of 83.5%, it confers excellent long  ; ;term weather protection on both rig id and flexible PVC compounds. It&am p;nb sp;has a high refractive index which imparts a higher opacity than other basic lead compounds, smell sweet. Indissoluble in&a mp;n bsp;water but dissoluble in acid, ch anges into ashblack at 200℃ and changes into yellow at 450℃
. Will burn when meeting f ire.
Uses: Used for PVC heat st ablizer in plastic industry. p>
Tribasic Lead Sulphate(TLS)
White powder, smell sweet, sligh tly dissoluble in water and dissolub le in nitric acid, hot chloric acid, ammonium acetate and sodium ac etate solutions, Lost crystallization, Tr ibasic Lead Sulphate, 3PbO, PbSo4, H 20, is the most popular and ver satile lead stabilisers for PVC. It& amp; nbsp;is one of the most cost ef fective stabilisers available, and is& ;nbs p;used in both rigid and flexible&am p;nb sp;PVC compounds for a wide range&am p;nb sp;of end product applications.Main appli cation is used for PVC heat stabilizer&am p;nb sp;in plastic industry