Name: Wireless Outdoor Dual- PIR Motion Detector ,Outdoor PIR Detector,Solar Detector,Wireless Mircowave+PIR Detector
The Wireless Outdoor Dual PIR Motion detector is an INPUT DEVICE, The PIR-OD01 Wireless Outdoor Dual PIR Motion detector is designed to provide detection of criminal intrusion through perimeter into a protected area by sensing infrared energy (heat) emitting from an intruder’s body moving through a protected area. The MOTION SENSOR is commonly referred to as a PIR, which stands for passive Infrared. Upon detection of intrusion, the PIR-OD01 Wireless Outdoor Dual PIR Motion detector automatically generates an alarm signal to control panel. The sensor also provides a tamper contact output. The unit is RF and EMI Immunity to interferences produced by radio device. The unit is can be wall-mounted by means of a bracket. Moreover, the PIR-OD01 Wireless Outdoor Dual PIR Motion detector powered up by solar panel, no need to connect power wires at all, total wireless connection.
Ø Waterproof design for outdoor, IP Grade is IP65;
Ø Duilt-in 2 newly-developed dual element passive infrared sensor unit;
Ø Intelligent MCU inside, increased anti-light interference and eliminate false alarm;
Ø Adopts Pet Immunity technology and specialized optical lens for eliminate false alarm;
Ø Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection;
Ø Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust;
Ø Selectable detection sensitivity (up to 8 sensitivity levels for choosing) for different environmental requirements;
Ø Internal Wireless Antenna, long distance transmission;
Ø Wireless transmitting digital signal to control panel;
Ø Learning code, easy to assign to the alarm panels;
Ø Tamper Switch for protecting the to avoid opened;
Ø SMT adopted, RF and EMI Immunity;
Ø Low power consumption, backup rechargeable battery;
Ø Low power alarm;
Ø Powered up by solar panel, no need wirings;
12VDC(Powered Up by Solar Panel)
Vertical angle 60degree, Horizontal angle 110 degree, 12m at 20°C.
less than 100uA
less than 30mA
> 30V/m 0.1-500MHz
Anti white light
minimum 100m( in the open area)
-20°C ~ +55°C
95% (25 ℃)
Wall mounted by bracket
3*1.2V AAA Ni-MH Rechargeable battery, can last up to 40days.
For outdoor applications, perimeter protection alarm systems.
Wired Ceiling mounted infrared detector(L&L-465 )
A: Automatic temperature compensation
B: SMT adopted, anti-PFI&anti-EMI
C: Pluse count optional
D: Alarm output N. C/N. O. Optional
1: Sensor: Low voice high sensitivity dural Rectangle infrared
2: Processor: Digital auto pulse signal processing(2 levels),
3: Temperature compensation: Auto
4: Start time: Switch on electricity for 60second
5: Examine speed: 0.2-7m/s
6: Sensitivity: Pulse count optional(2 levels)
7: Working Temperature: -10--50 degree
8: Power input: 9-16Vdc, 18mA
9: Lens: Fresnel Stereoscopic lens
10: Anti-White Light: Yes
11: Protection range: Installation Height 2.4m
12: Metal shield rejection: Anti-radiancy interference
13: Zone: (12+12+12+12+6+1)=55
14: Installation Height: 2.2-4.5m
15: Alarm indication: Green LED constant light 3 sec (can be off)
16: Alarm output: 28Vdc 0.15A N. C, 28udc, 0.15A
17: Anti-Tamper Switch: 0.15A, 28Vdc N. C.
Opens when cover removed, 0.15A, 28Vdc
18: Operating Humidit 95%
Detction method: Dual element PIR
Sensivity: 0.9m/sec (3 ft/sec)
Detection sepped: 0.15-3.6m/sec(0.5-12ft/sec)
Power input: 7.8 to 16VDC
Currect draw: Standby: 14mA
Active with LED: 8mA
Active W/O LED: 5mA
Temperature compensation: YES
Pluse width: Adjustable
Alarm output: N. C 28VDC 0.1A with 10ohm series protection resistor
Model No: L&L-DG85
Description: PIR Sensor,Dual Passive Infrared with pet funcation
1) Adopts refined 2 dual PIR sensors, intelligent digital chip.
2) Advanced "true motion recognition and pet immunity "technology to avoid interference.
3) Remarkable pet-immunity function to prevent pets under 25kg.
4) Germany imported optical filter to block motley light up to 99%.
5) special lens anti UV to reduce false alarm at maximum.
6) Automatic memory of environment change to avoid false alarm triggered by hot/cold air current or operation machinery.
7) Super filter can be used outdoor to avoid interference that other detector cant avoid.
8) Fully sealed design, two-layer water proof, macromolecule film plating for indoor and outdoor installation.
Detecte distance: 3-18m
Input Voltage: 9-16V DC
Current: 20mA-500mA @15VDC
Infrared zones: (11+11+9)*2
Working Temperation: -10-50 degree
Working humlity: 5%-95%.
1) Program up to 6 sensors (including PIR sensor, door sensor, smoke/gas sensor), 5 remote controls.
2) Supports wireless siren (KS-70B wireless outdoor siren/KS-70A wireless indoor siren).
3) Supports ADEMCO contact ID alarm monitor center and 5 phone numbers
4) 4 digits code can be reprogrammed
5) Low wrong-alarm rate: adopting processing technology of integrating dual
infrared sensor and chips for double intellectualized signal processing and
automatic temperature compensation
6) Compatible with dual voice frequency and pulse dialing
7) Dialing pause function.
8) Phone line cut detects
9) Leaving time re-setup
10) Power supply 9V adapter and rechargeable battery (5pcs Ni-MH)
11) Wildly be used in families, stops and offices
We are professional security alarm manufacturer & exporter in China, our products covers intruder alarm,burglar alarm system, PIR Detector & Sensor, Siren & Horn, Remote control, Security Gifts, Infrared detector, Smoke Gas Door Sensors, CCTV system, Emergency Lighting Systems, Fire Detection, Fire Alarm systems, Nurse Call Systems, burglar alarm,siren home alarms, gsm alarm systems, gsm solutions. car alarm system.
Please contact us MSN: bengsh07 AT hotmail DOT com, email:bengsh07 AT gmail DOT com, SKYPE:bengsh07, website:www DOT zuden DOT com