http://www.cranes-china.com------Rubber tired container gantry crane is usually called RTG for short, which is employed to stack containers in container storage yards. It is flexibly moved by its own rubber tires for transshipping containers.
1. The RTG is For standard-sized 20GP, 40GP, 45HQ containers and hydraulic storage tanks with Special Container Spreaders.
2. The trolley and crane traveling mechanisms equipped with three-in-one reducer, which is more convenient for maintenance.
3. The tires of RTG can rotate 90Â°and could travel obliquely at 20Â°and 45Â°
http://www.cranes-china.com------Fully Hydraulic, 4 wheels Rotating .360 degree Fully Hydraulic, 4 wheels Rotating .360 degree Fully Hydraulic, 4 wheels Rotating .360 degree Fully Hydraulic, 4 wheels Rotating .360 degree Fully Hydraulic, 4 wheels Rotating .360 degree
http://www.hislohydraulic.com------Directional valves with wet pin DC or AC solenoids, type WE10..L3XType WE valves are solenoid operated directional spool valves. They control the start, stop and direction of flow.The directional control valves consist of housing (1), one or two solenoids (2), the control spool (3), and one or two return springs (4).In the de-energised condition the control spool (3) is held in the neutral or initial position by means of return springs (4) (except for pulse spools). The control spool (3) is actuated via wet pin solenoids (2).To guarantee satisfactory operation care should be taken to ensure that the solenoid pressure chamber is filled with oil.The control spool(3) is moved to the expected position by solenoid(2) and pushing rod(5), and this gives free-flow from P to A and B to T or P to B and A to T.When solenoid (2) is de-energised, the control spool (3) is returned to its neutral position by means of the return springs (4).The solenoids may also control the control spool (3) by an optional override button (6) under the de-energised condition.For application in voltage pulsation, solenoids with large scope voltage are recommended. For application in high protective grade, waterproof plug should be used.Type 4WE10 .. L3X/OC ... (Only for symbols A, C and D)This version has 2 switched positions and 2 solenoids without detent, one of the solenoids must be energised and the spool position is not defined when the solenoids are de-energised .Type 4WE10 .. L3X/OFC ... (Pulse spool, only for symbols A, C and D)This version has 2 switched positions, 2 solenoids and a detent. Both switched positions are thus fixed alternately and so it is unnecessary to continually energise the solenoid.Cartridge throttle (type4WE 10 ... L3X/.../B ..)The cartridge throttle is necessary since actual flow may be larger than the performance Iimits of the valve during switching process.This cartridge throttle is inserted in the P channel of the directional control valve.WE10...L3X.pdf
http://www.hislohydraulic.com------Directional valves, with mechanical and manual operation, type WMM16, 25 and 32The type WMM valves are handle operation directional spool valves. They control the start, stop and direction of a flow.The directional valves basically comprise of a housing (1), handle (2), control spool (3), as well as one or two return springs (4).In the unoperated condition the control spool (3) is held in the neutral or its initial position by the return springs (4). The control spool (3) is actuated by the handle (2) via a joint and a pin. The spool is thereby moved out of its initial position into switched position.After the handle (2) has been returned to the zero switched position, the spool (3) is returned to the neutral position via the return springs (4).4WMMâ€¦/F... (With the detent)The directional valves with one detect, 2 or 3 switched position, can be orientated at any switched position.WMM16,25,32.pdf
http://www.ch-cooler.com------Industrial Oil Heat Exchanger with Hydraulic Motor HM2095Industrial Oil Heat Exchanger HM2095 is composed of reversible gear hydraulic motor,Website:http://www.ch-cooler.com,high strength fan blades and tightly structured high efficiency fin with 35 bar rated pressure.With high performance hydraulic motor,it can operate for a long run-on period continuously under complex working conditions,and it can be maintained with low operation cost easily.Technical DataHM Series Hydraulic Oil Heat ExchangerÂ specification HMThreadFlowMax. PressureExterior cooling area Â Â Gear motor displacement Â Â ml/rWeightGL/MinMpaãŽ¡kgHM20951 1/2"3502.019.01648Product Features:Assemblied with hydraulic motorGear motor driven hydraulic oil coolerThe heat is transferred from the medium to be cooled to the ambient airCooling of the oil discharge pipe of variable pumpApplication Field:Mobile MachineryMixing vehiclePort MachineryShipping MachineryGear BoxCranesPort MachineryConstruction machineryOffshore platform
Motor Power: 80W;
Motor Speed: 2300rev/min;
Oil Tank: 2~3L;
Rated Pressure: 160bar;
Mount Position: Horizontal or Vertical
Elbow making machine
BRAKE FLUID HD 3 & 4
- Heavy duty brake fluid recommended for use on ABS, vehicle hydraulic system, disc & drum brake systems where the use of brake fluid is recommended.
- High boiling point, providing extra safe operation for high-powered modern vehicles. Meets the specifications of: DOT 3 & DOT 4, SAE J 1703, ISO 4925 & FMVSS 116.
How to use:
1. Follow instruction manual recommended by OEM for adding brake fluid.
2. Clean main cylinder before draining then fill with BRAKE FLUID HD until 1/2 inch from top.
3. Once filled full with brake fluid, bleed trapped air from brake system.
4. Check fluid level once a month.
For best results, check brake fluid condition using refractometer once every 6 months. Refill with BRAKE FLUID HD once every 6 or 12 months.
IMPORTANT! DO NOT use mineral oil, gasoline or kerosene to clean brake systems and components. DO NOT re-use brake fluid drained from bleeding operation.
Packaging: Bottle 1 L, 300 mL & 50 mL (for motorcycle)
Shanghai Tianyang Steel Tube Co.,Ltd
Norm: DIN2391Â DIN2445Â EN10305Â DIN1630Â DIN1629Â ASTM A179 ASTM A106Â JIS G3445
Steel Grade: ST35(E235)Â ST45(E255)Â ST52(E355)Â ST37.4
Delivery condition: NBK(+N)Â GBK(+A)Â BK(+C)Â BKW(+LC)Â BKS(+SR)
Outside Diameter (mm): 4~200(mm)Â Â Â Â Â Wall Thickness(mm): 1~20(mm)
Main Purpose: Hydraulic System and Automobile
Terms for pipe:
Delivery time:20-30 days after receive deposit payment.
Delivery terms:FOB/CFR/CIF all available.
Payment terms:To be agreed on by both party.
Websit e:www steeltube-cn com
Synopsis of Process Routing: DIN highly accurate, cold drawn and bright seamless steel tube is used as the tube to be galvanized. The outer wall of tube is electroplate. The caps are covered at two ends of tube to prevent from the dust.
?@?@Main Features: color of steel tube: zinc white and color zinc (zinc yellow). The outer wall of tube has good property for antirust and anticorrosion Note: Length for galvanized steel tube should be within 6 Meters
?@?@Main Application: used in hydraulic system, in the occasion where the requirement for antirust and anticorrosion of outer wall is relatively high.
?@Synopsis of Process Routing: DIN highly accurate, cold drawn and bright seamless steel tube is used as the tube to be phosphated. The phosphated is realized with the imported chemical fluid to form a black film. The antirust oil is absorbed by means of the micropore on the film to prevent from the rust. The caps are covered at two ends of tube to prevent from the dust.
?@?@Main Features: color of steel tube: bright black. Color is homogeneously distributed on the tube surface. The tube has good property of antirust.
?@?@Main Application: used in hydraulic system. This tube is our main product for export business.
Synopsis of Process Routing: quality carbon steel ?? cold drawing ?? bright heat treatment without oxidization (NBK status) ?? nondestructive testing. In the wall honing and inside flushing under the high pressure??. Antirust oiling outside surface??plastic capping on both ends
?@?@Main Feature s: high accuracy, excellent brightness, no oxidization on the outer and inner walls after heat treatment, high cleanness inside wall. The steel tube is able to stand high pressure. No deformation after cold bending, no crack after flaring and flattening . The complicated geometrical forming and machining can be realized. Color of tube: gray with white.
?@?@Main Application: to be used in hydraulic system, automobile and in the occasion where the high precision, brightness, cleanness and mechanical properties of the tube are required.
our hydraulic power pack widely used in scissor lift, tailgate lift, dock leveller,lifting equipment, agricultural machine, medical machine, marine equipment,fitness equipment etc.
ALSO our LINEAR ACTUATOR can match your products exactly. detailed info pls check our website www.hydraulic-china.com