Water Based Polyurethan Adhesive for Soles Footwear Industry Adhesives |
WATER DISPERSION ADHESIVE WITH LOW VISCOSITY AND HIGH RESISTANCE TO HEAT
The IDROTEX 200 is a water based polyurethan adhesive used for sticking of synthetics on soles of different materials changing only the preparation of the soles. By spraying. High Crystallization CHARACTERISTICS : Viscosity : 200 / 250 Mpa Reactivation : 50/55 °C USING INSTRUCTIONS : Mix very well the adhesive. Apply an homogeneous coat upon the two parts has to be stickked, wait for the evaporation of the water and then reactivate the adhesive at a temperature of 50/55°C and then press the two parts. PREPARETAION OF THE SOLES : LEATHER SOLES : No preparation TR SOLES : Wash the soles with PRIMER-FAC RUBBER SOLES : Card the soles and wash them with PRIMER-FAC PU SOLES : Card the soles TUNITH SOLES : Wash the soles with PRIMER-FAC The adhesive can be improved with addition of ACTIVATOR DN in 5/6 % weight. In this case the adhesives has to be used in 60/90 Min. ATTENTION : With temperature near to 0°C the product freezes and can no more be used. The products has to be conserved in the original tins well closed and in a cool and dry place. N.B.: All the indications over reported are without obligation and warranty. PACKAGINGS : Kg 800 - Kg 200 - Kg 40 - Kg 20 - Kg 10 Kg 5 - Kg 1.