Add New Product | My Products | Free Product Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "Converter"
advertisements
Sc Fiber Media Converter Sc Fiber Media Converter

 ZZT is Our New Brand, adaptive Ethernet optical transceiver can inter convert the eletric signal of inter electric signal of 100/1000Base-TX twisted pair and optical signal of 100BASE-TX. It extends the network transmission range fron 100m to 100km ( single mode optical fiber ). Its typical application between the equipment room of community with MAN. No configuration of the switch is needed during connection due to the adaptive function. The newly added lightning protection function guarantees the safety of the equipment. 

Features and benefits
Built-in power
Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100BAse-TX and 100Base-FX standards
Fiber connectivity up to 2km for multi-mode fiber
One auto-MDIX RJ-45 connector interface
Full-Duplex, Half-Duplex ot Auto-Negotiation
Supports packet length up to 1600 bytes
8 diagnostic LEDs ( 100Mbps, fiber full duplex, UTP full, fiber link, UTP link, fiber signal detect, fiber far-end-fault detect and power )
Provides fault propagation function fir easy cable fault detection
[Related Categories: Fiber Optic Equipment ]
[Related Keywords: Converter ]
Any in any out, Seamless switcher, LED video processor (VSP 628) Any in any out, Seamless switcher, LED video processor (VSP 628)

 Any in any out, Seamless sw itcher, LED video processor (VSP 628)&am p;am p;am p;am p;nb sp;

 

Detailed Product Description

2048*1152 
10-bit sampling and internal processin g/scaling 
Up down convert /cross convert/scan&am p;am p;am p;am p;nb sp;convert 
Any in any out 

 

The VSP 628 is a multi  ; ; ; ; ;loop-throught video processor that accep ts a wide variety of video sign als. All input signals can be l ooped out without being switched. It  combines truly seamless, glitch-free& ; ; ; ;nbs p;switching with advanced scaling technol ogies to meet the requirements of&am p;am p;am p;am p;nb sp;high quality, high resolution video&am p;am p;am p;am p;nb sp;presentations. It has been designed&am p;am p;am p;am p;nb sp;for presentation-enhancing features such&am p;am p;am p;am p;nb sp;as fade-in fade-out transition effect,  multiple output formats, adjustable  ; ; ; ; ;size and position of picture, multi ple user modes, PIP modes, multiple& amp; amp; amp; amp; nbsp;control methods, which make VSP  ; ; ; ; ;628 the ideal seamless switcher to& amp; amp; amp; amp; nbsp;deliver advanced capabilities to hig h-end presentation environments.

 

Features:

 

Processing:

True Seamless switching

High quality scaling technology

10-bit sampling and internal p rocessing/scaling

Short video delay

Any in any out 

 

Multiple Inputs:

VSP 628 provides 3xcomposite(CVBS)& amp; amp; amp; amp; nbsp;,1xS-Video1, 1xDVI (compatible with  HDMI 1.3) 1xVGA, 2x3G self-adaptive SDI  input(SDI module) for the application& ; ; ; ;nbs p;in different environments. 

Embedded sending card is not&a mp;a mp;a mp;a mp;n bsp;including without order 

 

Multiple Outputs:

1 x VGA output is provide d for connection to a VGA-based  ; ; ; ; ;monitor;

2 X DVI outputs are provi ded for splitting into two different  pictures or distributing the same two pictures, the two D VI outputs can be connected with& ; ; ; ;nbs p;LED display or other display.

 

Multiple Control Methods:

Front Panel, RS232, USB, Etherne t

 

[Related Categories: Professional Audio, Video & Lighting ]
[Related Keywords: Converter, Video scaler, Video processor ]
advertisements
LED Video Processor (VSP 330) Mediawall processor LED Video Processor (VSP 330) Mediawall processor

 LED Video Processor (VSP 330) Med iawall processor

 

Detailed Product Description

Mulitple pictures viewing, videowall sp litter and processor. 

Inputs (DVI connector) 
1)2 HDMI input; 
Outputs (DVI connector) 
1) 1 HDMI loop; 
2) 4 HDMI output; 
Support Functions: 
1) Picture in Picture; 
2) Fade in Fade out; 
3) 1920x1080x60Hz max in/out 
Every port; 
4) Image zoom & rotation; 
Control Interface 
1)Front panel; 
2) USB; 
3) TCP/IP; 
Size 483 x 365 x 44 mm;  ; ;
Power supply 2x25W backup; 
Humidity 10%~85%;

 

[Related Categories: Professional Audio, Video & Lighting ]
[Related Keywords: Converter, Video scaler, Video processor ]
LED Displays Dual Image Genlock Video Processor (VSP 618S) LED Displays Dual Image Genlock Video Processor (VSP 618S)

 LED Displays Dual Image Genlock V ideo Processor (VSP 618S)

Detailed Product Description

LED displays video processor Support&a mp;a mp;n bsp;many brands sending cards. 
Support fade in fade out. 
Output Resolution: 640x480~2048x11 & amp; lt; span style="mso-spacerun:\'yes\'; font-size:10.5000pt; font-family:\'Arial\'; ">

Input: 
3 x composite (CVBS)
1 SVideo
1 Component
1 VGA
1 DVI(Compatible with HDMI 1.3 st andard)
2 x SD/HD SDI(VSP 618B only)
2 x HDMI (HDMI 1.3 compatible& ; ;nbs p;VSP 618C only)

Output: 
1. VGA
2. DVI
3. HDMI(VSP 618D only)
4. CVBS(VSP 618A only)
5. SD/HD SDI(VSP 618S only)

Functions: 
1. Support PIP\\POP\\PBP as well  as user-defined pixel-based scale and& ; ;nbs p;dual-channel operation seperately; 
2. Support output resolution: 640*480* 60Hz to 2048*1152*60Hz; 
3. Support keyboard operation; 
4. Support serial and TCP/IP remo te control; 
5. Support showing user\'s logo a nd sub-title to the display. NEW!

 

[Related Categories: Professional Audio, Video & Lighting ]
[Related Keywords: Converter, Scaler, Video processor ]
advertisements
Mini Signal Generator Mini Converter (MSP 200) Mini Signal Generator Mini Converter (MSP 200)

 Mini Signal Generator Mini Converter&a mp;a mp;a mp;a mp;a mp;n bsp;(MSP 200)

 

Detailed Product Description

1. Signal generator: 1 x Composit e (CVBS);Component (SD/HD);1 x HDMI;  ; ; ; ; ; ;1 x SDI (SD/HD);2.Tool for testing& amp; amp; amp; amp; amp; nbsp;your digital or video. 

Mini Signal Generator Mini Converter&a mp;a mp;a mp;a mp;a mp;n bsp;(MSP 200):

Tooling for testing your video &a mp;a mp;a mp;a mp;a mp;a mp; digital idea!

Key Features:

Input No Input;

Output

1) 1 x Composite (CVBS);

2) 1 x Component (SD/HD);

3) 1 x HDMI;

4) 1 x SDI (SD/HD);

Support functions:

1) Standard PPM;

2) Analog Audio output;

3) Output resolution:

480i/576i,720p50,720p59.94,

720p60,1080i50,1080i59.94,

1080i60,1080p50,1080p59.94,

1080p60(Component Only)

Control Interface: RS 422

Size 98mm x 120mm x 20mm;

Power supply +12V 3.5 inch power module;

Temperature 0°C~40°C;

Humidity 10%~85%;

 

[Related Categories: Professional Audio, Video & Lighting ]
[Related Keywords: Converter, Video scaler, Video processor ]
Inverter Special for Elevator and Escalator Inverter Special for Elevator and Escalator

Q-7000 series of brilliant inverters for operation of elevators and escalators are designed to have a lot of exclusive features including Q-7000-EC especially for escalator, Q-7000-EL and Q-7000-IP especially for elevator. 

Q-7000 series are all the type adopting IGBT’s PWM control and current vector control, V/F control. Q-7000 series have the function such as connection-point-memory & DC0-10V EASY TUNING, loading compensation for start-up torque, and manual vernier adjustment correcting. High efficiency and safe function, 300% torque compensation. Monitor torque compensation output of the inverter at anytime so as to reduce the shocking the elevator during running. The series of products has easy tuning function to the motor parameters and are complied with the regulation of GB, with braking unit (for≤45kw) and speed feedback unit.

Q-7000-EC is for open loop control without built in PG card, especially used for escalator with brilliant performance by long life design and support RS-485 communication port.

Q-7000-EL is used for geared asynchronous motor. PG card is built in for customer to realize the high fine speed control. Q-7000EL support standalone signal, frequency division, isolated signal, and open collector output functions for Encoder. 200% of rated current for 10 seconds. Speed control accuracy is nominal 1:100 and could reach 1:1000 with PG.

Q-7000 IP is used for gearless synchronous motor. It also support standalone single, frequency division, isolated signal and open collector output functions for Encoder. Q-7000IP supports Line drive 8192 C/T. Its ultra-slim design is adequate for machine room-less elevator. It combines 32- digit vernier-adjustment current vector control and stochastic PWM control. The ultra-low noise, with adjustable wave frequency, carrier frequency 2k-15k is adjustable.

All of Q-7000 series support the RS-485 communication port and other more functions that customers would find most necessary in elevator controls to provide an inverter that delivers performance which fits the elevator systems.

 contact:wendy_qma (a) 163.com

[Related Categories: Transformers ]
[Related Keywords: power inverter, Converter, sinewave inverter ]
advertisements
 Inverter Special for Blower and Water Pump Inverter Special for Blower and Water Pump
  • Square torque curve special for blower and water pump
  • Adjustable V/F operating mode
  • New-generation of IGBT application, high switching frequency reduces noise effectively
  • RS485 port and MODBUS communication protocol are flexible for various connections.
  • With autotuning function and can be operated in current vector.
  • Stall prevention function ensures the system safety effectively.

 contact: wendy_qma (a ) 163.com

[Related Categories: Electronics Production Machinery, Power Distribution Equipment ]
[Related Keywords: Converter, sine wave inverter, power inverter ]
LED Displays Dual Image Genlock Video Processor (VSP 618S) LED Displays Dual Image Genlock Video Processor (VSP 618S)

 LED Displays Dual Image Genlock V ideo Processor (VSP 618S)

Detailed Product Description

LED displays video processor Support&a mp;a mp;a mp;n bsp;many brands sending cards. 
Support fade in fade out. 
Output Resolution: 640x480~2048x11 & amp; amp; lt; span style="mso-spacerun:\'yes\'; font-size:10.5000pt; font-family:\'Arial\'; ">

Input: 
3 x composite (CVBS)
1 SVideo
1 Component
1 VGA
1 DVI(Compatible with HDMI 1.3 st andard)
2 x SD/HD SDI(VSP 618B only)
2 x HDMI (HDMI 1.3 compatible& ; ; ;nbs p;VSP 618C only)

Output: 
1. VGA
2. DVI
3. HDMI(VSP 618D only)
4. CVBS(VSP 618A only)
5. SD/HD SDI(VSP 618S only)

Functions: 
1. Support PIP\\POP\\PBP as well  as user-defined pixel-based scale and& ; ; ;nbs p;dual-channel operation seperately; 
2. Support output resolution: 640*480* 60Hz to 2048*1152*60Hz; 
3. Support keyboard operation; 
4. Support serial and TCP/IP remo te control; 
5. Support showing user\'s logo a nd sub-title to the display. NEW!

 

[Related Categories: Professional Audio, Video & Lighting ]
[Related Keywords: Converter, Scaler, Video processor ]
advertisements
CANBUS/DeviceNet/CANOpen Fiber Optic Repeater CANBUS/DeviceNet/CANOpen Fiber Optic Repeater

 

Summarize
This series is a Can protocol fieldbus fiber optic repeater, supporting CAN2.0A/B protocol: CANDeviceNetCAN OpenSDSNMEA2000SAE J1939SAE J2284 standard fieldbus etc., independent dual bus electric interface and 2 fiber interface, supply redundancy dual-bus structure and fiber optic redundancy ring network function, supply safe and efficient redundant long-distance transmission and relay functions for redundant dual-network system. Shenzhen Comark Technology Co., Ltd. is a professional manufacture for industrial network equipment, equipment using the latest technology, completed core intellectual property rights, and pioneered the innovation products in this field.
The equipment unique characteristics in dual-electric business and dual-optic interface, support dual-network redundancy and fiber optic ring network, point to point, star topology, daisy chain bus, ring network and hybrid network architecture.
Up to over 60km fiber-optic long-distance transmission, breaking through the cable system’s distance limitations.
The dual-electric channel is logically independent, support 1 to 2 optic/electric interface collocation flexibly, according to actually needs of the project, achieve the flexible configuration in 1 channel optical interface, 1 channel data interface; 1 channel optical interface, 2 channels data interface; 2 channels optical interface,1 channel data interface; 2 channels optical interface,2 channels data interface. Ci-af series is general products based on Can Standard, compatible with other types of bus, rate set by the DIP switch, can support 32 kinds of commonly used rate; Ci-df/oF series is special products against DeviceNet, Can Open, only support all the standard rate, rate set by the DIP switch or rate adaptive settings optional.
155M dual optical interface can better support optical fiber transmission can bus outstanding advantages:reciprocity transmission, bust of data, bus arbitration etc., while achieving high-speed long-distance transmission, isolation between electrical and ground, reduce interference and other performance. Industrial-grade design, IP30 protection, wave patterns aluminum strength case, 35mm DIN Rail mounting, DC (9-36) v wide power input,alarm relay output, dual-power redundancy and isolation protection,etc.
Feature
l        &am p;nb sp; Support logically independent dual-can bus; include CAN2.0A and CAN2.0B, 32 kinds of pre-communication rate.
l        &am p;nb sp; DeviceNetCAN Open bus support manually set all the standard rate or rate adaptive.
l        &am p;nb sp; 1 to 2 channels CAN electric interface and 1 to 2 channels 155M optical interface flexible optional, support optical ring network topology with redundancy dual-network.
l        &am p;nb sp; Over 60km optical transmission distance, 155Mb/s, high-speed optical interface better support burst of data and long-distance reliable transmission.
l        &am p;nb sp; 6 dual-color LED status indicator, fiber optic link and power failure alarm relay output.
l        &am p;nb sp; Electric interface with 4000V lightning protection, 1.5A overcurrent, 600W surge protection, industrial-class design, EMC testing and certification.
l        &am p;nb sp; DC9-36V wide redundancy dual power, DC1500V power isolation, reverses polarity protection.
l        &am p;nb sp; IP30 protection, wave patterns aluminum strength case, standard industrial 35mm DIN rail mounting.
 
Network Topology
Network deployment topologies can achieve the following network connection: point to point communication, chain network, star network, redundant dual-network and fiber optic ring network self-healing protection etc.
This product applied flexibly, can form a variety of fiber-optic network. Logically independent dual-bus electric interface, backup the electric interface can be achieved or single equipment access to redundancy system; 2 canbus network segments connected by fiber optic can be achieved when using point to point network; the optical bus with dual-optical port chain network can achieve multi-network segments canbus connection(up to 200); meanwhile, this product use dual-optical port to achieve dual-fiber ring network redundancy function, fiber failure somewhere, system will rebuild the network link within 10ms to ensure the normal communication.
 
Specifications
& ;nbs p;
Electrical interface
Ø        1 to 2 5-Pin terminal interface, comply the CIA Organization recommends, as well as ODVA. 
Ø        Support CAN BUS/DeviceNet/CANOpen bus standard.
Ø        Communication rate: DeviceNet/CANOpen all and normal use can rate grade, up to 1M.
Ø         With the function of 4000V Anti–lightning and 1.5A overcurrent protection, as well as 600W surge protection.
Ø         Termination resistor: the machine without termination resistor provided, please press the need for external.
 
Optical interface
Ø         Optical wavelength: Multi-mode 850nm, 1310nm; Single-mode 1310nm, 1550nm.
Ø         Transmission fiber: Multi-mode 50/125 um, 62.5/125 um, 100/140 um; Single-mode 8.3/125um, 9/125um, 10/125um.
Ø         Transmission distance: Multi-mode 2km, Single-model 20km, longer distance optional.
Ø         Optical interface type: SC, FC, ST optional, comes standard with SC optical interface.
 
Power and Protection
Ø         Power: dual-power redundancy input, DC9-36V, typical DC24V, power consumption less than 4W, with the function of DC1500V voltage isolation and reverse polarity protection, industrial terminal interface. 
Ø         Relay alarm out put: optical fiber link failure and power failure alarm output, the maximum capacity of contact: DC48V/1A, industrial terminal interface.
Mechanical
Ø         Dimensions: 132mm×52mm×105mm (H×W×D)
Ø         Casing: IP30 protection, wave patterns aluminum strength case.
Ø         Installation: 35mmDIN-Rail.
Ø         Net weight: 800g
 
Environmental
Ø         Operating Temperature: -10-70℃ (-40℃ to+85℃ wide temp optional)
Ø         Ambient Relative Humidity: ≤90% (non-condensing)
Ø         Storage Temperature: -40℃ to 80℃
 
Testing and certification:
Ø         IEC61000-4-2(ESD) air±8KV contact±4KV;  
Ø         IEC61000-4-3(RS) 10V/m80-1000MHz;  
Ø         IEC61000-4-4(EFT) L-N-PE±2KV data access±1.0KV;
Ø         IEC61000-4-5(Surge) L-N±1KV L/N-PE±2KV data access±0.5KV;
Ø         IEC61000-4-6(CS) 10V150kHz-80MHz;
Ø         IEC61000-4-8(MS) long:30A/m short:300A/m;
Ø         IEC61000-4-11(Dips).
Applications:
Electric Power system, transportation, energy monitoring and industrial control, etc.
 
Order information

Part No.
Series
Specifications and descriptions
Unite
Ci-af11
One standard can interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-af12
One electric port, two optical ports
One standard can interface, two optical interface, DIP switch set the rate, use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-af21
Two electric ports, one optical port
Two independent standard can interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-af22
Two electric ports, two optical ports
Two independent standard can interface, two optical interface, DIP switch set the rate, use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-df11
One electric port, one optical port
One standard DEVICENET interfaceone optical interface, DIP switch to set the rate or rate adaptive mode optional; use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.  
pcs
Ci-df12
One electric port, two optical ports
One standard DEVICENET interfacetwo optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-df21
Two electric ports, one optical port
Two independent standard CANOPEN or DEVICENET interface, one optical interface, DIP switch to set the rate or rate adaptive mode optional; use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.  
pcs
Ci-df22
Two electric ports, two optical ports
Two independent standard DEVICENET interface, two optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-of11
One electric port, one optical port
One standard CANOPEN interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-of12
One electric port, two optical ports
One standard CANOPEN interface, two optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-of21
Two electric ports, one optical port
Two independent standard CANOPEN interface, one optical interface, DIP switch set the rate, use for point to point type, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs
Ci-of22
Two electric ports, two optical ports
Two independent standard CANOPEN interface, two optical interface, DIP switch to set the rate or rate adaptive mode optional; use for chain, star, ring, and other network structure, multi-mode fiber 0~2Km, single-mode fiber 0~20Km, more remote optional, optical interface type: ST/SC/FC optional.
pcs

 
[Related Categories: Fiber Optic Equipment, Network Communications ]
[Related Keywords: Converter, hub, fiber optic converter, DeviceNet, CANopen, CANBUS ]
CANBUS/DeviceNet/CANOpen Redundant Link Module CANBUS/DeviceNet/CANOpen Redundant Link Module

 

Summarize

This product is CAN protocol fieldbus redundant module; achieve the exchange between single bus and redundant dual bus, which can connect CAN single port device to redundant bus network. Real-time monitoring communication status, when working port receiver detect the fault frame, char error, consecutive busy and falling short of protocol error or bus consecutive busy for a long time, will close this port, and then activate the redundant port as working port. Ci-aa21 series support the fieldbus based on CAN2.0A/B: CANDeviceNetCANOoenSDSNMEA2000SAE J1939SAE J2284 and so on, rate set by DIP switch (recommend) or rate adaptive optional, support CAN bus normally used rates. Shenzhen Comark Technology Co., Ltd. is a professional industrial networking equipment supplier; equipments done adopt the latest technology with their own completed intellectual property rights, launched the products with the features of industry’s innovative.

The equipment can be set after CAN device, change single cable bus to redundant bus, also can change the redundant cable to non-redundant cable, meanwhile featured Opto-isolation, reducing interference and other functions. Products designed as industrial class, IP30 protection grade, wave pattern aluminum casing, 35mm DIN rail installation, DC (9-36) V, widely power input, featured relay alarm output, dual power redundant, isolation protection and other advantages.

Feature

l        &am p;nb sp; Support 3 channels of independent CAN bus, include CAN2.0A and CAN2.0B, 32 kinds of pre-communication rate.

l        &am p;nb sp; DeviceNetCANOoen bus support DIP switch manually set all the standard rates or rate adaptive

l        &am p;nb sp; 6 pcs of LED status indicators with dual-color, power fault relay output alarm.

l        &am p;nb sp; Electric interface 4000V thunder-proof, 1.5A overcurrent protection, 600W surge protection. Industrial design, EMC test certificate.

l        &am p;nb sp; DC9-36V wide temperature redundancy dual power, reverse connection protection.

l        &am p;nb sp; IP30 protection grade, wave pattern aluminum enhance case; adopt standard industrial 35mm Din Rail installation.

Specifications

Electrical Interface:

Ø         3 pcs of 5pin port, conform the CiA organizational recommendation.

Ø         Support CAN BUS/DeviceNet/CANOpen bus standard.

Ø         Communication Rates: DeviceNet/CANOpen all and normal used rate grade, up to 1M.

Ø         Have the protection function of 4000V anti-lightning,1.5A over-current and 600W surge-proof.

Ø         Terminal Resistance: the equipment without terminal resistance, please use the external one when necessary.

Power and Protection:

Ø         Power: dual power redundancy input, DC9-36V, typical DC24V, power consumption less than 4W, has DC1500V voltage isolation and reverse protection, industrial terminal interface.

Ø         Relay alarm output: optical fiber link failure and power error alarm output, maximum capacity of contacts: DC48V/1A, industrial terminal interface.

Mechanical Properties:

Ø         Dimensions: 132mm×105mm×52mm

Ø         Casing: IP30 protection grade, wave pattern aluminum enhanced casing.

Ø         Installation: 35mmDIN rail installation.

Ø         Net weight: 800g

Order information

P/N

Series

Description

Unite

Ci-aa21

1+2 electrical ports

CAN2.0A/B standard, 1 “M” port (CAN3), 2 redundant bus A (CAN1), B (CAN2) ports. DIP switch set rate.

pcs

Ci-dd21

1+2 electrical ports

DeviceNet standard, 1 M port (CAN3), 2 redundant bus A (CAN1), B (CAN2) ports. DIP switch set rate or rate adaption optional.

pcs

Ci-oo21

1+2 electrical ports

CANOpen standard, 1 M port (CAN3), 2 redundant bus A (CAN1), B (CAN2) ports. DIP switch set rate or rate adaption optional.

pcs

 

[Related Categories: Fiber Optic Equipment, Network Communications ]
[Related Keywords: Converter, Redundant Link Module, DeviceNet RLM, CANopen, CANBUS ]
advertisements
CAN BUS/DeviceNet/CANOpen HUB Repeater CAN BUS/DeviceNet/CANOpen HUB Repeater

 

Summarize
This series is CAN protocol fieldbus HUB repeater, support the CAN2.0A/B fieldbus standard: CANDeviceNetCANOoenSDSNMEA2000SAE J1939SAE J2284 etc. Data forwarding mutually within the Independent 3 channels bus electronic interfaces, implement electronic signal relaying and the cable star topology link. Ci-aa30 series based on CAN bus standard, rate set by DIP switch (recommend) or choose rate adaptive. Shenzhen Comark Technology Co., Ltd. is a professional manufacture for industrial network equipment, equipment using the latest technology, completed core intellectual property rights, and pioneered the innovation products in this field.
The equipment can prolong the transmission distance of CAN bus, change the bus topology structure, meanwhile featured Opto-isolation, reducing interference and other functions. Products designed as industrial class, IP30 protection grade, wave pattern aluminum casing, 35mm DIN rail installation, DC (9-36) V, widely power input, featured relay alarm output, dual power redundant, isolation protection and other advantages.
l        &am p;am p;nb sp; Support 3 channels of independent CAN bus; include CAN2.0A and CAN2.0B, 32 kinds of pre-communication rate.
l        &am p;am p;nb sp; Featured the function of 3 ports hub and repeaters, easy to achieve the star topology and prolong the cable distance.
l        &am p;am p;nb sp; DeviceNetCANOoen bus support DIP switch manually set all the standard rates or rate adaptive DeviceNetCANOoen.
l        &am p;am p;nb sp; 6 pcs of LED status indicators with dual-color, power fault relay output alarm.
l        &am p;am p;nb sp; Electric interface 4000V thunder-proof, 1.5A overcurrent protection, 600W surge protection. Industrial design, EMC test certificate.
l        &am p;am p;nb sp; DC9-36V wide temperature redundancy dual power, reverse connection protection.
l        &am p;am p;nb sp; IP30 protection grade, wave pattern aluminum enhance case; adopt standard industrial 35mm Din Rail installation.
Electrical Interface:
Ø         3 pcs of 5pin port, conform the CiA organizational recommendation.
Ø         Support CAN BUS/DeviceNet/CANOpen bus standard.
Ø         Communication Rates: DeviceNet/CANOpen all and normal used rate grade for CAN bus, up to 1M.
Ø         Have the protection function of 4000V anti-lightning,1.5A over-current and 600W surge-proof.

Ø         Terminal Resistance: the equipment without terminal resistance, please use the external one when necessary.

 
Ø         Power: dual power redundancy input, DC9-36V, typical DC24V, power consumption less than 4W, has DC1500V voltage isolation and reverse protection, industrial terminal interface.
Ø         Relay alarm output: optical fiber link failure and power error alarm output, maximum capacity of contacts: DC48V/1A, industrial terminal interface.
Mechanical Properties:
Ø         Dimensions: 132mm×105mm×52mm
Ø         Casing: IP30 protection grade, wave pattern aluminum enhanced casing.
Ø         Installation: 35mmDIN rail installation.
Ø         Net weight: 800g
Environmental:
Ø        Storage Temperature: 4080
 
Order information

P/N
Series
Description
Unite
Ci-aa30
3 electrical ports
3 channels independent Can bus interfaces, DIP switch set rate
pcs
Ci-dd30
3 electrical ports
pcs
3 electrical ports
3 channels independent Canopen interfaces, DIP switch set rate or rate adaptive optional
pcs

 
[Related Categories: Network Communications, Fiber Optic Equipment ]
[Related Keywords: Converter, hub, DeviceNet hub, CANopen, CANBUS ]
ATC-1204 - 4-port/8-port RS-485 hub (HUB), converter ATC-1204 - 4-port/8-port RS-485 hub (HUB), converter

 

Additional information

Features
  • Star topology: offer more flexible RS-485/RS-422 star bus structure with RS-485 interface input/output adopting independent drive modes. Change the original single bus structure into network structure which can greatly enhance the stability for engineering construction and system.
  • Industrial class photoelectric isolation: offer over 3KV of photoelectric isolation to all RS-485 interfaces, and effectively solve the transmission problems caused by outside lightning strike, surge and potential difference.
  • Automatic data direction control: solve data direction problem through hardware, judge and control data transmission direction automatically.
  • Short/open circuit protection: possess RS-485 port malfunction alarming function, and can cut off malfunctioned port automatically, which can ensure the isolation of malfunctioned RS-485 PORT connected with it in order to ensure the proper operation of devices in other net segments.
Performance parameters
  • Interface feature: interface is compatible with EIA/TIA RS-232C, RS-485 standard.
  • Electric interface: RS-232C interface is RJ-45 socket and RS-485 interface is RJ-45 socket.
  • Transmission media: twisted-pair cable or shielded cable.
  • Working mode: asynchronous half duplex.
  • Signal indication: 2 green signal indication lights indicate TXD RXD, a red light indicates power supply and there are still 4 red malfunction alarming lights.
  • Isolation: isolation voltage 3500VRMS 500V sequence.
  • Transmission speed: 115.2K-300 BPS.
  • Protecting grade: RS-232 interface+15KV ESD protection RS-485 interface 600W lightning strike and surge protection on each line.
  • Transmission distance: 0-5 kilometers (57600-300BPS).
  • Size: 140mmx130mmx30mm.
  • Working environment: -25oC to 55oC, 5% to 95% relative humidity

 

ww w.atc-converters.eu/atc-1204-p-3701.html

 

[Related Categories: Network Communications ]
[Related Keywords: RS-485/RS-422, Converter ]
advertisements
ATC-804 - USB to 4 Serial Port Converter RS-232 ATC-804 - USB to 4 Serial Port Converter RS-232

 www .atc-converters.eu/atc-804-p-3705.html

 

Additional information

With USB to serial series product connect to your computer. No longer would the usage of a serial RS-232 device be restricted by the availability of the connectable ports on the desktop laptop or work station system users don’t have the ability to convert the connection of their peripherals into USB compatible without making any changes to the applications written for them.

Features
  • USB1.1 full speed 12Mbps with bus power.
  • Compatible with USB2.0 standard.
  • Support Wake on line & power manager function.
  • Support Hot-Swapping & Plug-n-Play.
  • Industrial grade design for stability and reliability.
  • Data transfer speed up to 460.8 Kbps.
  • No IRQ, DMA, I/O, address resources required.
  • Dual data buffers for upstream and downstream data flow.
  • Support Microsoft Windows and Linux.
  • Chip: FTDI FT4232H
  • USB: conform to USB1.1 standard, and is compatible with USB2.0 spec.
  • Serial port: support 4 RS-232 serial ports.
  • Interface: DB9 male connector
  • Power supply:USB bus power supply or +12V-24VDC external power supply
  • Environment: operating temperature: -40-70℃
 
[Related Categories: Wireless Networking Equipment ]
[Related Keywords: Converter, RS-232 ]
RS 232/422/485 to GPRS converter F2103 GPRS DTU RS 232/422/485 to GPRS converter F2103 GPRS DTU

 

Additional information

F2103 GPRS DTU adopts high-powered RISC CPU and embedded real time operating system. It integrates all the commonly used protocols from logical link layer to upper application layer protocols, such as TCP/IP/UDP and so on. It provides a secure, high speed, reliable wireless internet connection for customers. It supports several ways that trigger DTU to be online, including audio, SMS and data. Also, it supports double or several data centers. This product has been widely used on finance, water supply, environment protection, electric  power system, post and weather fields. Used in embedded systems, automations, inteligents buildings and intelligents traffic system (ITS).

Characteristic features:
  • Support RS-232, RS-422, RS-485
  • Male connector RS232/485
  • Serial ports standard RFC2217 support by EIATIA
  • Famale anthena connector
  • Built-in Watchdogtimer
  • Easy to configure thansk attached software
  • Support AT commands
  • Remember settings even after power failure
  • Include technology "always online"
  • Adjust to hard conditions (-25°C to 65°C and humidity 5% to 95%)
  • 7 work modes
  • 5 ways to remote wake up
\"RS

Technical parameters

Product features:
Wireless specification:
  • EGSM900/GSM1800
  • GPRS multi-slot class 10
  • Compliant to GSM phase 2/2+
  • Support SMS and data function
Hardware system:
  • High-powered MCU, 100M
  • Interface feature: interface is compatible with RS232/485 serial port, rates: 110~230400bits/s
  • Indicator lights: "Power", "ACT", "Online"
  • Antenna interface: standard SMA famale interface, 50 ohm
  • SIM/UIM interface: standard user card interface
  • Power interface: standard 3-PIN power jack
  • Power supply: Standard power supply: DC 12V/0.5A
  • Power range: DC 5~35V
  • Wireless modul: High power industrial GPRS module
  • Size: Outline dimension: 91x58.5x22 mm
  • Operation temperature:-25~+65ºC
  • Storage temperature: -40~+85ºC
  • Humidity: 95% (unfreezing)
Software Function:
  • Design with standard TCP/IP protocol stack
  • Adopt smart online keeping technology to make sure that DTU is always online
  • Support RSA and RC4 encryption arithmetic
  • Support APN
  • Transparent data transfer and protocol conversion. Support multi work modes
  • Support dynamic domain name(DDNS) and IP access to data center
  • Support double data centers, one main and another backup
  • Multi data centers, It can support 5 data centers at the same time.
  • Multi online trigger ways, including SMS, audio and data.
  • SMS backup and emergency report
  • Hardware and software WDT
  • Reporting the status of data transfer
  • Standard AT command interface
  • Common MODEM function
  • Support telnet function/li>
  • Remote configure and control
  • Easy to upgrade firmware
  • Support multi OS, such as WINDOWS, LINUX, SCO UNIX etc.

Specification
Construction
Interface RS-232/485 to GPRS
Connectors
RS-232/485 DB9 famale
GPRS anetnna SMA female interface, 50 ohm
Performance parameter
operation mode: transparent data transfer or multi-modes
Transmission distance 0-100 meters, rates: 110~230400bits/s
Operation
Temperature -25°C to 65°C, 5% to 95% relative
humidity
Dimensions
Length 91mm
Width 59mm
Height 22mm

[Related Categories: Network Device, Connectors and Terminals ]
[Related Keywords: RS-485, RS-422, RS-232, gsm modem, GPRS, Converter ]
advertisements
Universal PCI Board - MSB-118 Universal PCI Board - MSB-118

 

Additional information
The MSB-118 is a high performance 8-port RS-232/422/485 universal serial board. Each port of the MSB-118 can be independently configured as RS-232, RS-422 or RS-485 serial Interface by adjusting the on-board DIP switch.

16C950 Compatible High Speed UART

A high-performance 16C950 compatible UART chip with 128-byte FIFO is used for MSB-118 to improve the transmission throughput and reduce the host computer\'s CPU loading. Over 700Kbps data throughput for each port is guaranteed when all ports run concurrently.

Universal PCI Bus Compatible

The MSB-118 is an universal PCI board which means the board can be plugged into PCs with 5V 32-bit PCI slots or PCs with 3.3V 32-bit PCI slots.

Features
  • Each port can be independently configured as RS-232, RS-422 or RS-485 serial Interface
  • High performance 16C950 compatible UART with 128-byte FIFO
  • Over 700Kbps data throughput for each port when all ports run concurrently
  • Hardware auto-direction control for RS-485
  • Baud rate from 50bps to 921.6Kbps
  • On-board bi-color LEDs as status indicators
  • Compatible with 3.3V or 5V 32-bit PCI slots

Technical parameters
Specification
Hardware
Bus supports both 5V and 3.3V 32-bit PCI
I/O address assigned by BIOS
IRQ assigned by BIOS, one IRQ for all serial ports
No. of Boards 4 max. (share the same IRQ)
UART Oxford 16mPCI954 plus 16C954
Host connector 68pin SCSI-3 connector, female

Serial Port Parameters

Type RS-232/422/485, switch selectable
Baud Rate 50bps to 921.6 Kbps
Parity None, Even, Odd, Mark, Space
Data Bits 5,6,7,8 bits
Stop Bit 1, 1.5, 2 bits
Flow Control RTS/CTS, XON/XOFF, None
Protection 15KV ESD for all signals
LED eight bi-color LEDs for status monitoring
Connection Cable (CBL-M68M9x8-100)
Host side 68-pin SCSI-3 connector, male
Device side DB9 connector, male
Length 100cm
Drivers
Windows 2003/XP/2000/NT/98/95/ME
Linux 2.4.12 and above
General
Power consumption 300mA@5VDC
Dimension 75 x 158 mm (29.5 x 62.2 inches)
Operation temp. 0~55C(32~131F), 5~95% RH
Storage temp. -20~85C, 5~95% RH
Regulation CE/FCC Class A compliant
Warranty 1 year
 

[Related Categories: I/O Card ]
[Related Keywords: automation, Industrial electronics, Building Automation, PLC, MCU, Selection Guide, Industrial software, Scada, Converter, monitoring SNMP ]
Automation controller - iPAC-5010 Automation controller - iPAC-5010

 

Additional information
The iPAC-5010 is a Linux-based, network-enabled and Web-ready programmable automation controller. It features rich digital inputs/outputs for real-world I/O controls.

Open and standard programming environment

The iPAC-5010 is a true Linux computing platform with file system support. Users can operate the iPAC-5010 the same way as they do on a normal Linux desktop. Open-source GNU Tool Chain, including C/C++ cross-compiler and POSIX standard C/C++ library, is bundled with the iPAC-5010 for free.

Network enabled and Web ready

The iPAC-5010 provides two 10/100Mbps Ethernet ports. A sophiticated Web server is pre-installed for users to implement applications which need Web-based remote monitor and controls. In addition, it is easy to add IEEE-802.11b/g WiFi support through the iPAC-5010\'s USB 2.0 ports.

High-speed serial interface

Also, the iPAC-5010 provides one RS-232 and one RS-485 serial ports, running up to 921.6kbps. The RS-485 port supports hardware direction control.

Opto-isolated digital inputs

The iPAC-5010 provides 16 channels of isolated digital input with opto-isolation protection up to 2500Vrms to ensure the iPAC-5010 can work properly in noisy industrial environment. Each input channel comes with a on/off status LED.

Darlington-pair digital outputs

The iPAC-5010 provides 8 channels of Darlington-pair digital output, which can drive external relays directly. Each output channel comes with a on/off status LED.

Optional 4GB SD Card for Data Storage

Users can install one standard SD Flash memory card, up to 4GB now, into the iPAC-5010 as an additional hard drive. The Aport-211S is an easy-to-use Serial-to-Ethernet gateway which is designed for applications requiring quick, reliable and seamless integration of existing RS-232/422/485 devices to an Ethernet network.

Serial-to-Ethernet Data Convertion

The Aport-211S provides a transparent data channel between serial device and the TCP/IP network, so that the serial device can be accessed by using standard TCP/IP protocols.

Versatile Operation Modes

The Aport-211S can behave as a TCP server, a TCP client or an UDP node on an Ethernet network to fulfill versatile application requirements.

Programmable Digital I/O

Besides, the Aport-211S also provides 6 TTL plus 2 CMOS digital I/Os. A pre-defined ASCII command set is provided for users to control these I/Os through LAN/WAN.

\"\"

Features
  • Pre-built Linux 2.6.x OS with file system
  • 180MHz ARM9 CPU, 64MB SDRAM and 16MB Flash
  • 16x opto-isolated digital inputs
  • 8x Darlington-pair digital outputs to drive external relays
  • Two 10/100Mbps Ethernet ports
  • One RS-232 port, one RS-485 port
  • Two USB 2.0 host ports for add-on functionality expansion
  • One SD memory card slot included for storage expansion
  • GNU C/C++ tool chain for Linux/Windows environment
  • 9-40VDC input range

 

Technical parameters
Specification
Hardware Specifications
CPU/Memory
CPU ATMEL 180MHz AT91RM9200 (ARM9, w/MMU)
Memory 64MB SDRAM, 16MB Flash

Network Interface

Type Two 10/100BaseT, RJ-45 connector
TTY (Serial) Ports
RS-485 one port, with screw-fixed wiring terminal
Signals: Data+, Data-, GND
RS-232 one port, with 10P header
Signals: Tx, Rx, RTS, CTS, DSR, DTR, DCD, GND
Cosole one port, with 10P header
Signals: Tx, Rx, GND
TTY (Serial) Port Parameters
Baud Rate up to 921.6 Kbps
Parity None, Even, Odd, Mark, Space
Data Bits 5,6,7,8
Stop Bit 1, 1.5, 2 bits
Flow Control RTS/CTS, XON/XOFF, None
USB Host Ports
  Two USB 2.0 compliant hosts, with 10P header
Data rate up to 12Mbps
Mass Storage
  One SD 1.0 compliant socket inside
General
WatchDog Timer yes, for kernel use
Real Time Clock yes
Buzzer yes
Power input 9~40VDC
Power consumption 800mA@12VDC
Dimension 160 x 104 x 32mm
Operation Temperature 0 to 70C(32 to 158F)
Regulation CE Class A, FCC Class A
Software Specifications
General
OS Linux, kernel 2.6.x
Boot Loader U-Boot 1.1.2
File Systems JFFS2, ETX2/ETX3, VFAT/FAT, NFS
Protocol stacks
IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, FTP, Telnet, HTTP, PPP, PPPoE, CHAP, PAP, SMTP, SNMP V1/V2, SSL, SSH 1.0/2.0
Utilities
bash shell command
tinylogin login and user manager utility
telnet Telnet client program
busybox Linux utility collection
ftp FTP client program
Daemon
pppd Dial In/out over serial port and PPPoE
snmpd SNMP agent program
telnetd Telnet server program
inetd TCP server program
ftpd FTP server program
boa Web server program
sshd secured shell server
iptables Firewall service manager
armd Artila manager daemon
Tool Chain for Linux
GCC C/C++ PC cross compiler for Linux, CygWin
GLIBC POSIX Library
Device Drivers
  SD/MMC, UART, Real Time Clock, Buzzer, Digital I/O, Ethernet, Watchdog Timer
USB Host Drivers (could be customized)
  Flash disk
  WiFi (IEEE-802.11b/g)
  RS-232 adaptors
Digital I/O Specifications
Isolated Digital Input
No. of channels 16
Logical high 5 ~ 24VDC
Logical low 0 ~ 1.5VDC
Input resistance 1.2k ohms@0.5W
Response time 20us
Opto-isolation 2500Vrms
Digital Output
No. of channels 8
Source driver UDN2981A (Allegro)
Source voltage (VDD) 5~50VDC
Output current 500mA max.
 

 

[Related Categories: Computer, IC Card, Network Device ]
[Related Keywords: monitoring SNMP, Converter, Scada, Industrial software, Selection Guide, MCU, PLC, Building Automation, Industrial electronics, automation ]
advertisements
Mini-PCI MSM-4S Mini-PCI MSM-4S

 

Additional information
The MSM-4S is a high performance 4-port industrial serial communication Mini-PCI module. Port P1 and P2 can be independently configured as RS-232, RS-422 or RS-485 serial Interface by adjusting the on-board DIP switch. Port P3 and P4 are dedicated RS-232 serial interface.

16C950 Compatible High Speed UART

A high-performance 16C950 compatible UART chip with 128-byte FIFO is used for MSM-4S to improve the transmission throughput and reduce the host computer\'s CPU loading. Over 700Kbps data throughput for each port is guaranteed when all ports run concurrently.

Features
  • Mini-PCI interface, 50 mm height only
  • 2x RS-232/422/485 ports, select by DIP switch
  • 2x dedicated RS-232 ports
  • Baud rate from 50bps to 921.6Kbps
  • 16C950 compatible UART with 128-byte FIFO
  • Over 700Kbps data throughput for each port running concurrently
  • Hardware auto-direction control for RS-485
  • Software drivers included for Windows 2003/XP/2000/NT/98/95/ME and Linux

Technical parameters
Specification
Hardware
Bus Mini-PCI
IRQ one IRQ for all serial ports
No. of Boards 4 max. (share the same IRQ)
UART Oxford 16mPCI954 or compatible
Host connector 10-pin header for each serial port
Protection 15KV ESD for all signals

Serial Port Setting

P1 RS-232/422/485, select by DIP SW S1,S2
P2 RS-232/422/485, select by DIP SW S3,S4
P3,P4 RS-232 only
Serial Port Parameters
Baud Rate 50bps to 921.6 Kbps
Parity None, Even, Odd, Mark, Space
Data Bits 5,6,7,8 bits
Stop Bit 1, 1.5, 2 bits
Flow Control RTS/CTS, XON/XOFF, None
  Hardware auto-direction control for RS-485
Drivers
Windows 2003/XP/2000/NT/98/95/ME
Linux 2.4.12 and above
General
Power consumption 200mA@3.3VDC
Dimension 59 x 50 mm
Operation temp. 0~55C(32~131F),5~95% RH
Storage temp. -20~85C,5~95% RH
Regulation CE/FCC Class A compliant
Warranty 1 year
 

[Related Categories: Network Device, IC Card ]
[Related Keywords: Converter, monitoring SNMP, Modbus RTU, Modbus TCP, Industrial Ethernet, wireless modem, RS485, RS422, RS232, Movicon ]
Multi mode RS485/232 media converter KOM200-M-485/232A Multi mode RS485/232 media converter KOM200-M-485/232A

 

Additional information
KOM200 provides the optoelectronic switch for the low-rate signals of RS232 and RS485. It is specially designed for harsh industrial environment that has special requirements for electromagnetic immunity.

Technical parameters
Features
  • 2 x RS232 and 1 x RS485
  • Fast redundant ring network (recovery time<20ms)
  • Transparent Communication, plug & play
  • Special protection circuit of serial port, hot-swappable
  • Integrated fiber optic module, reliable optical power
  • Complete electromagnetic/ fulminous immunity
  • DIN-Rail mounting and fixed on rack
  • Able to form single optical fiber network

Parameters

Data/Optical Interface

Bit Error Rate

≤10-10

rate

0--115.2Kbps (Adaptive)

Electric characteristics

Accord with relevant requirements of Standards RS232, RS422, RS485; RS-485 interface can be connected to 32-128 nodes; transmission distance: 1200 meters

Connector

FC/SC/ST

Power requirements

Power input

+9 – 30VDC(Non-isolated), DC220V

Operating temperature

-35°C to +75°C

Storage/transport temperature

-45°C to +85°C

Relative humidity (non-condensing)

10% to 95%(non-condensing)

Mechanical construction

Dimensions (W x H x D)

36mm x 100mm x 75mm

Mounting

DIN-Rail mounting

EMC interference immunity

EN 61000-4-2 electrostatic discharge (ESD)

+4 kV contact discharge, +8 kV air discharge

EN 61000-4-3 electromagnetic field

10 V/m (80 - 1000 MHz)

EN 61000-4-4 fast transients (burst)

+2 KV power line, +1 kV data line

EN 61000-4-5 surge voltage

Power line: +2 kV (line/earth), +1 kV (line/line), +1 kV data line

EN 61000-4-6 conducted immunity

3 V (10 kHz - 150 kHz), 10 V (150 kHz - 80 MHz)

Electromagnetic Immunity

FCC CFR47 Part 15

EN55082-2

[Related Categories: Network Engineering, Network Communications ]
[Related Keywords: automation, Industrial electronics, Building Automation, PLC, MCU, Selection Guide, Industrial software, Scada, Converter, monitoring SNMP ]
advertisements
Embedded Serial-to-Ethernet Module SE-100M Embedded Serial-to-Ethernet Module SE-100M

 

Additional information
The SE-100M is a mini-mighty Serial-to-Ethernet embedded module which adds network function for legacy RS-232/422/485 devices.

Serial-to-Ethernet Data Conversion

The SE-100M provides a transparent data channel between serial device and the TCP/IP network, so that the serial device can be accessed by using standard TCP/IP protocols.

Versatile Operation Modes

The SE-100M can behave as a TCP server, a TCP client or an UDP node on a Ethernet network to fulfill versatile application requirements.

Programmable Digital I/O

Besides, the SE-100M also provides 6 TTL plus 3 CMOS digital I/Os. A pre-defined ASCII command set is provided for users to control these I/Os through LAN/WAN.

\"\"

Features
  • Adds Ethernet connectivity for RS-232/422/485 devices
  • 10/100Mbps Ethernet; 38,400bps serial data rate
  • Supports TCP/Server, TCP/Client and UDP mode
  • Provides six TTL-level programmable digital I/Os
  • Provides three CMOS-level programmable digital I/Os
  • Web/Telnet/Serial consoles for device configuration
  • Windows utility included for device management
  • Firmware upgradeable

Technical parameters
Specification
Form Factor
Type 30-pin dual-inline drop-in module
Pitch 2.00mm
WxLxH 40x45x13mm

Network Interface

Type 10/100BaseT, auto-detect
Protocols TCP, UDP, HTTP, Telnet, IP, ICMP, ARP
IP addressing DHCP, Static IP
Operation Modes
  TCP/Server, TCP/Client and UDP mode
Serial Interface (TTL-level)
Signals TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Baud 1,200 to 38,400 bps
Parity None, Even, Odd
Data bits 7,8
Stop bit 1,2
Flow control None, RTS/CTS, XON/OFF
Programmable Digital I/O
PIO0~PIO5 TTL level compatible
PIO6~PIO8 CMOS level compatible
Configuration Methodss
  Web console, Telnet Console and Serial Console
  Windows utility (included in CD)
General
Power input 5VDC
Power consumption 100mA@+5VDC
Operation temp. 0~70C, 5~95% RH
Storage temp. -20~85C, 5~95% RH
Regulation CE/FCC compliant
Warranty 1 year
 

[Related Categories: Network Engineering, I/O Card ]
[Related Keywords: automation, Industrial electronics, Building Automation, PLC, MCU, Selection Guide, Industrial software, Scada, Converter, monitoring SNMP ]
Linux-ready ARM9 Computer Matrix-520 Linux-ready ARM9 Computer Matrix-520

 

Additional information
The Matrix-520 is a mini-mighty Linux-ready ARM9-based computing platform for embedded headless run-only application. It comes equipped with two Ethernet, eight TTY (serial) ports, two USB host and one USB client ports, plus one internal SD memory card slot and twenty-one TTL-level GPIOs in an incredible small package measuring only 160x104x38.5 mm.

100% Linux Compatible , Hassle Free

The Matrix-520 is a true Linux computing platform and it supports versatile file systems. Users can operate the Matrix-520 the same way as they do on a normal Linux desktop.

Support Wire and Wireless Networking

The Matrix-520 comes with two standard 10/100Mbps Ethernet ports for wired networking. In addition, it is easy to add IEEE-802.11b/g WiFi support by simply plugging an USB WiFi dongle into the Matrix-520.

Eight High Speed TTYs (Serial Interface)

Also, the Matrix-520 provides eight 921.6Kbps high-speed TTY ports. Port 1,5,6,7 and 8 can be configured as RS-232, RS-422 or RS-485. Port 2 features full RS-232 supporting for modem connection. Port 3 and Port 4 support standard RS-232s.

18x2 High-brightness LCM Display

\"\"

The Matrix-520 features a high-brightness 18x2 LCM display. User application can easily display run-time messages through Artila\'s utility, which is pre-installed in the Matrix-520.

Twenty-one TTL-level GPIOs

The Matrix-520 comes with twenty-one TTL-level digital I/Os. Each pin can be individually programmed as input or output.

Optional 4GB SD Card for Data Storage

Users can install one standard SD Flash memory card, up to 4GB now, into the Matrix-520 as an additional hard drive.

GNU Tool Chain for Application Development

Open-source GNU Tool Chain, including C/C++ cross-compiler and POSIX standard C/C++ library, is bundled with the Matrix-520 for free.

\"\"\"\"

Features
  • 100% Linux 2.6.x compatible computing platform
  • 64MB SDRAM and 16MB Flash
  • 18x2 high-brightness LCM display
  • Two 10/100Mbps Ethernet port
  • Eight 921.6Kbps high speed TTY (serial ) ports
  • Two USB 2.0 host ports for add-on functionality expansion
  • One SD memory card slot inside for storage expansion
  • Twenty-one TTL-level digital I/Os (GPIO)
  • One audio out supporting mp3 and wav format
  • GNU C/C++ tool chain for Linux/Windows environment

Technical parameters
Specification
Hardware Specifications
CPU/Memory
CPU ATMEL AT91RM9200 (ARM9-core)
Clock 180MHz
SDRAM 64MB
Flash 16MB
EEPROM 2KB

LCM Display

Type 144x32 dot-matrix, w/ built-in English font
Text mode can display 18x2 characters
Network Interface
No. of ports two
Type 10/100BaseT, RJ-45 connector
Protection 1.5KV magnetic isolation
TTY (Serial) Ports
Port 1,5,6,7,8 can be set as RS-232, RS-422, or RS-485
Port 2,3,4 RS-232
Port 2,5,6,7,8 supports full modem signals
Connector RJ45 connector
TTY (Serial) Port Parameters
Baud Rate up to 921.6 Kbps
Parity None, Even, Odd, Mark, Space
Data Bits 5,6,7,8
Stop Bit 1, 1.5, 2 bits
Flow Control RTS/CTS, XON/XOFF, None
USB Host Ports
No. of ports two
Speed USB 2.0 compliant, supports low-speed (1.5Mbps) and full- speed (12Mbps) data rate
Digital I/Os (GPIO)
No. of pins twenty one pins
Signal level TTL compatible
Each pin can be programmed as input or output
Mass Storage
  One SD 1.0 compliant socket inside
Audio output
  support mp3 and wav formatsupport mp3 and wav format
General
WatchDog Timer yes, for kernel use
Real Time Clock yes
Buzzer yes
Power input 9~40VDC
Power consumption 300mA@12VDC
Dimension 160 x 104 x 38.5mm
Operation Temperature 0 to 70C(32 to 158F)
Regulation CE Class A, FCC Class A
Software Specifications
General
OS Linux, kernel 2.6.x
Boot Loader U-Boot 1.1.2
File Systems JFFS2, ETX2/ETX3, VFAT/FAT, NFS
Protocol stacks
IPv4, ICMP, ARP, DHCP, NTP, TCP, UDP, FTP, Telnet, HTTP, PPP, PPPoE, CHAP, PAP, SMTP, SNMP V1/V2, SSL, SSH 1.0/2.0
Utilities
bash shell command
tinylogin login and user manager utility
telnet Telnet client program
busybox Linux utility collection
ftp FTP client program
lcdctl Matrix LCM control utility, can turn On/Off LCM and display user messages
Daemon
pppd Dial In/out over serial port and PPPoE
snmpd SNMP agent program
telnetd Telnet server program
inetd TCP server program
ftpd FTP server program
boa Web server program
sshd secured shell server
iptables Firewall service manager
armd Artila manager daemon
Tool Chain for Linux
GCC C/C++ PC cross compiler for Linux, CygWin
GLIBC POSIX Library
Device Drivers
  LCM, SD/MMC, UART, Real Time Clock, Buzzer, Digital I/O, Ethernet, Watchdog Timer
USB Host Drivers (could be customized)
  Flash disk
  WiFi (IEEE-802.11b/g)
  RS-232 adaptors
 

[Related Categories: Network Engineering, ]
[Related Keywords: automation, Industrial electronics, Building Automation, PLC, MCU, Selection Guide, Industrial software, Scada, Converter, monitoring SNMP ]
1 2 3 4 5 6 7 8 9 10  >> 
Scroll