Add New Product | My Products | Free Product Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "China"
advertisements
Child Bathtub-MG8813 Child Bathtub-MG8813

http://www.nm-mengbao.com------Jiaxing Selak Sanitary Wares Technology Co.,Ltd is one of the best child bathtub-mg8813 manufacturers and suppliers, welcome to wholesale cheap child bathtub-mg8813, bathtubs for toddlers from our factory.Product: Child BathtubBrand: Nami • MengpoModel: MG8813(white) MG8813-1 (yellow) MG8813-2 (green)MG8813-3 (pink)Size: 1200 x 650 x 700 mmTub Depth: 450 mmVolume: 0.55m3Description:- Bathtub specially designed for child in a sitting position. - The bathtub is made of environmentally friendly ABS plastic material, smooth and easy to clean; safe and with no toxic released in use.- Unique decoration space with transparent safety glass makes bathing fun.- The height of the bathtub makes it easy to bath the child in a standing position.- Accessories: water handles, handheld showerhead, pop-up stopper.- With good heat-insulation effect, the tub saves water and can be used in all seasons.- Application: family, maternity and children hospital, entertainment center, children spa, hotel, etc.- Suitable for child of 3-5 years old.The bathtub is designed to allow a kid to sit comfortably while bathing. It’s 450mm deep.Left: hot water handle.Middle: handheld showerhead in cute animal design.Right: cold water handleInstruction: let in cold water first, and then add hot water slowly. Decoration space with transparent safety glass, equipped with a drain hole at the bottom.The bathtub is strongly supported by stainless steel frames (made of 25x25 stainless steel square tubes). The height of the bathtub can be adjusted through the screws at the bottom.Pop-up stopper.Installation Tips:1. Connect the showerhead to the shower tube.2. Connect the water inlets of the tub to the hot and cold water supply in the wall using pipes.3. Put the drain pipe into the drain on the floor.4. If the product is not steady, adjust the bottoms of the feet to make it level and steady.Color Options: white, yellow, green, pinkProduct: Child BathtubBrand: Nami • MengpoModel: MG8813-4 (cartoon yellow)MG8813-5 (cartoon green) MG8813-6 (cartoon blue)MG8813-7 (cartoon pink)Size: 1200 x 650 x 700 mmTub Depth: 450 mmVolume: 0.55m3Description:- Bathtub specially designed for child in a sitting position. - The bathtub is made of environmentally friendly ABS plastic material, smooth and easy to clean; safe and with no toxic released in use.- Unique decoration space with transparent safety glass makes bathing fun.- The height of the bathtub makes it easy to bath the child in a standing position.- Accessories: water handles, handheld showerhead, pop-up stopper.- With good heat-insulation effect, the tub saves water and can be used in all seasons.- Application: family, maternity and children hospital, entertainment center, children spa, hotel, etc.- Suitable for child of 3-5 years old.The bathtub is designed to allow a kid to sit comfortably while bathing. It’s 450mm deep.Left: hot water handle.Middle: handheld showerhead in cute animal design.Right: cold water handleInstruction: let in cold water first, and then add hot water slowly. Decoration space with transparent safety glass, equipped with a drain hole at the bottom.The bathtub is strongly supported by stainless steel frames (made of 25x25 stainless steel square tubes). The height of the bathtub can be adjusted through the screws at the bottom.Pop-up stopper.Installation Tips:1. Connect the showerhead to the shower tube.2. Connect the water inlets of the tub to the hot and cold water supply in the wall using pipes.3. Put the drain pipe into the drain on the floor.4. If the product is not steady, adjust the bottoms of the feet to make it level and steady.Color Options: white, yellow, green, pink

[Related Categories: ]
[Related Keywords: child bathtub-mg8813, bathtubs for toddlers, China, manufacturers ]
Agri Grade Fertilizer Granular Price Zinc Sulfate Agri Grade Fertilizer Granular Price Zinc Sulfate

http://www.brgagri.com------Agri Grade Fertilizer Granular Prize Zinc SulfateQuick Detail:Product Name:Zinc sulfateOther Names:Zinc sulphateChemical Formula:ZnSO4CAS No.:7446-19-7HS Code:28332930Appearance:White granular or powderOther Information:Place of Origin:Tianjin,ChinaTransportation:20 FCLPackaging Details:25kg PP bagsDelivery Time:15 days after prepaymentPayment Terms:TT, L/CSpecifications:ItemsStandardUnitZn21.5min%Heavy metal (Pb)0.0010max%Arsenic (As)0.0005max%Cd:0.0010max%Applications: Used as raw material for the production of lithophone and zincsalts. It is also used in synthetic fiber industry, zinc plating , pesticides, flotation, fungicide and water purification. In agriculture, it is mainly used in feed additive and trace element fertilize, etc  Packaging & Delivery Packaging Details: 25kg bags or as customer's requirementDelivery Detail: Prompt Shipment after order confirmationStorage & Handing Precautions: Do not ingest. Do not breathe dust. Wear suitable protective clothing in case of insufficient ventilation, wear suitable respiratory equipment If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Storage: No specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be sure that it is not necessary to strain to reach materials, and that shelves are not overloaded.First Aid MeasuresEye Contact:Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention. Skin Contact:After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention.Ingestion:Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention. Serious Skin Contact:Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention. Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention. Competitive Advantage: Our Advantages 1. 18 years experience in chemical industry2. Supply full range of chemical materials and work with many cooperated manufacturers3. Respond in 24 hours to enquiry4. Select the suitable shipping company according to different line.5. Claim about quality should be sloved within 15days after the cargo arriving White qualityOur service-Prompt reply & instant communication available -Free sample delivery-Provide photos for cargo tracing after order confirmation Company Information:Tianjin BRG Products Co., Ltd. is an expert of chemicals import and export. We own or have shares of several factories. Now we're mainly producing Caustic Soda, Sodium Thiosulfate, Sulfur Black, Sodium Tripolyphosphate, Sodium Hexametaphosphate and fertilizers. We sincerely hope to build a bridge between our customers and China, "Best Product And Service, Responsible Attitude Will Gratify Our Customers" is our business principle. 

[Related Categories: ]
[Related Keywords: agri grade fertilizer granular price zinc sulfate, China, supplier ]
advertisements
PE Leaf Tarps PE Leaf Tarps

http://www.dandelionoutdoor.com------Dandelion Outdoor Equipment Co.,Ltd is one of the leading China pe leaf tarps manufacturers and suppliers with one of the famous brands, our professional pe leaf tarps factory is able to produce customized cheap and high quality pe leaf tarps products.PRODUCT PICTUREModel No.TECHNICAL DETAILSAvailable SizeDOPT015Leaf Tarps At each corner, the leaf tarps are prepared with ¼' polypropylene ropes handles. These leaf tar ps are washable and are UV treated. There are flexible drawstrings on all the sides of the le af tarp. All you have to do is to heap and put all the leaves on the tarp, pull the string s and carry it. We offer our leaf tarps to help you with removing huge loads of leaves and which requires strong leaf tarps. We also provide the leaf tarps are 20 x 20 specially designe d for pools to catch falling leaves.12' x 20' 14' x 14'

[Related Categories: ]
[Related Keywords: pe leaf tarps, China, suppliers, manufacturers, factory, brands ]
Child Bathtub-MG8813 Child Bathtub-MG8813

http://www.nm-mengbao.com------Jiaxing Selak Sanitary Wares Technology Co.,Ltd is one of the best child bathtub-mg8813 manufacturers and suppliers, welcome to wholesale cheap child bathtub-mg8813, bathtubs for toddlers from our factory.Product: Child BathtubBrand: Nami • MengpoModel: MG8813(white) MG8813-1 (yellow) MG8813-2 (green)MG8813-3 (pink)Size: 1200 x 650 x 700 mmTub Depth: 450 mmVolume: 0.55m3Description:- Bathtub specially designed for child in a sitting position. - The bathtub is made of environmentally friendly ABS plastic material, smooth and easy to clean; safe and with no toxic released in use.- Unique decoration space with transparent safety glass makes bathing fun.- The height of the bathtub makes it easy to bath the child in a standing position.- Accessories: water handles, handheld showerhead, pop-up stopper.- With good heat-insulation effect, the tub saves water and can be used in all seasons.- Application: family, maternity and children hospital, entertainment center, children spa, hotel, etc.- Suitable for child of 3-5 years old.The bathtub is designed to allow a kid to sit comfortably while bathing. It’s 450mm deep.Left: hot water handle.Middle: handheld showerhead in cute animal design.Right: cold water handleInstruction: let in cold water first, and then add hot water slowly. Decoration space with transparent safety glass, equipped with a drain hole at the bottom.The bathtub is strongly supported by stainless steel frames (made of 25x25 stainless steel square tubes). The height of the bathtub can be adjusted through the screws at the bottom.Pop-up stopper.Installation Tips:1. Connect the showerhead to the shower tube.2. Connect the water inlets of the tub to the hot and cold water supply in the wall using pipes.3. Put the drain pipe into the drain on the floor.4. If the product is not steady, adjust the bottoms of the feet to make it level and steady.Color Options: white, yellow, green, pinkProduct: Child BathtubBrand: Nami • MengpoModel: MG8813-4 (cartoon yellow)MG8813-5 (cartoon green) MG8813-6 (cartoon blue)MG8813-7 (cartoon pink)Size: 1200 x 650 x 700 mmTub Depth: 450 mmVolume: 0.55m3Description:- Bathtub specially designed for child in a sitting position. - The bathtub is made of environmentally friendly ABS plastic material, smooth and easy to clean; safe and with no toxic released in use.- Unique decoration space with transparent safety glass makes bathing fun.- The height of the bathtub makes it easy to bath the child in a standing position.- Accessories: water handles, handheld showerhead, pop-up stopper.- With good heat-insulation effect, the tub saves water and can be used in all seasons.- Application: family, maternity and children hospital, entertainment center, children spa, hotel, etc.- Suitable for child of 3-5 years old.The bathtub is designed to allow a kid to sit comfortably while bathing. It’s 450mm deep.Left: hot water handle.Middle: handheld showerhead in cute animal design.Right: cold water handleInstruction: let in cold water first, and then add hot water slowly. Decoration space with transparent safety glass, equipped with a drain hole at the bottom.The bathtub is strongly supported by stainless steel frames (made of 25x25 stainless steel square tubes). The height of the bathtub can be adjusted through the screws at the bottom.Pop-up stopper.Installation Tips:1. Connect the showerhead to the shower tube.2. Connect the water inlets of the tub to the hot and cold water supply in the wall using pipes.3. Put the drain pipe into the drain on the floor.4. If the product is not steady, adjust the bottoms of the feet to make it level and steady.Color Options: white, yellow, green, pink

[Related Categories: ]
[Related Keywords: child bathtub-mg8813, bathtubs for toddlers, China, manufacturers ]
advertisements
616-30-8 616-30-8

http://www.meso-hepatitis.com------PRODUCT DESCRIPTIONEnglish Name: 3-Amino-1,2-propanediolCAS: 616-30-8Molecular Formula: C3H9NO2Molecular Weight: 91.1091Appearance: Colorless transparent to light yellow viscous liquidAssay: NLT 99.0%Application: Other intermediates Packing: Plastic bag, aluminum tin; carton barrel.Storage: Protect from humidity; keep in a dry, cool, and shady place. Remarks: Used for research and development, technician study, reprocessing of chemical intermediates, etc.SHIPPING METHODS● By Courier: Fedex, EMS, DHL, TNT, UPS, etc.● By air, airport to airport● By seaPAYMENT TERMS● Wire Transfer/Telegraphic Transfer● Western Union● Paypal● L/C● D/A, D/P, etc.PACKAGE● Moisture-proof Plastic Bags● Aluminum Foil Bag● 5KG/10KG/25KG/45KG Drums

[Related Categories: ]
[Related Keywords: 616-30-8, China, manufacturers, suppliers, factory, buy, high purity ]
239463-85-5 239463-85-5

http://www.meso-hepatitis.com------PRODUCT DESCRIPTIONEnglish Name: 5-[(2R)-2-aminopropyl]]-1-[3-(benzoyloxy)propyl]-2,3-dihydro-7-carbonitrile-1H-indole-(2R,3R)-2,3-dihydroxybutanedioate CAS: 239463-85-5Molecular Formula:C22H25N3O2.C4H6O6Molecular Weight: 513.55Appearance: Light green to off-white solid powderAssay: NLT 99.0%Application: Intermediate of SilodosinPacking: Plastic bag, aluminum tin; carton barrel.Storage: Protect from humidity; keep in a dry, cool, and shady place. Remarks: Used for research and development, technician study, reprocessing of chemical intermediates, etc.SHIPPING METHODS● By Courier: Fedex, EMS, DHL, TNT, UPS, etc.● By air, airport to airport● By seaPAYMENT TERMS● Wire Transfer/Telegraphic Transfer● Western Union● Paypal● L/C● D/A, D/P, etc.PACKAGE● Moisture-proof Plastic Bags● Aluminum Foil Bag● 5KG/10KG/25KG/45KG Drums

[Related Categories: ]
[Related Keywords: 239463-85-5, China, manufacturers, suppliers, factory, buy, High ]
advertisements
Underground Combined Transformer Underground Combined Transformer

http://www.yb-electric.com------Yuebian Electric Co.,Ltd is one of the leading China underground combined transformer manufacturers and suppliers, welcome to check underground combined transformer price with us.16.Underground combined transformerUnderground Combined TransformerMost combined transformers are powered by underground power cable and no incoming and outgoing cables buried underground can be seen from outside.Since there is no naked electrified part outside the transformer, no outside fence or restriction area is needed.The combined transformer allows unauthorized or occasional approach to the housing surface in design. Though mostly installed on ground,the unit is safe and reliable.Underground Combined Transformer is another kind of power distribution transformer. Fully installed underground. It is the "underground power distribution equipment" in true sense. The unit is generally installed in the maintenance hole of concealed ditch or small silo. With respect to the overall appearance, it is similar to the conventional power distribution transformer. However, it is underground and the high-low voltage wiring terminals must be fully insulated and sealed. Convenient and reliable operation should be considered in design.1.Terms and Definition1.1 Underground Combined TransformerA kind of corrosion resistant enclosed power distribution transformer and combined transformer that can be installed underground(or in ground pit)1.2 Ground PitThe site with water drainage and for underground installation of transformer, a certain space around the underground transformer shall be reserved at the site. The unit can be covered, but the ventilation hole and manhole shall be reserved.1.3 Product type2. Technical Features·Suitable for urban environment(installed underground or in pit),especially for the highly populated down towns.·Suitable for the lighting systems of street, expressway, bridge, tunnel, parking lot, airport harbor and scenic spot etc.·High&low voltage incoming and outgoing cables are connected fully enclosed, insulated and shielded.·The housing is made of anti-corrosion stainless steel, fully enclosed and can be immersed into water for a certain period of time.·The special situation of ventilation and heat radiation is fully considered with low loss and designed temperature.3.Structure3.1 Oil TankSince the primary equipment is shifted from ground to underground , various negative environmental factors, for example, moisture, water dipping, ventilation and heat radiation etc. have to be considered. The first consideration shall be given to the possibility that the underground transformer is immersed into water for short time, or the oil tank is immersed into water for long time. So, the oil tank of underground transformer must be fabricated with strong corrosion-proof materials and at protection level of IP 68. Therefore, the oil tank is made of corrosion-proof stainless steel, and the housing cover and the housing are permanently welded. The oil tank is in below structure, however, different from the conventional one, the corrugated wall only dissipates heat, does not expand. So, the height of corrugated wall is less than 160mm and made of stainless steel with min. thickness of 1.5mm,so that it can withstand big pressure. The tank does not deform under the pressure of 0.5kg,does not break or give way to leakage under the pressure of 1kg.3.2 Bushing10kV power cable is connected with high voltage sleeve adapter through elbow type separable cable terminals. The high voltage sleeve adapter is in special design and made with special process to guarantee the insulation distance within the oil level change range, the sealing against the housing, insulating fitting and sealing with elbow type cable adapter. The elbow type cable adapter is supported by a reinforcing bracket at the outside to improve its reliability. The low voltage cables go out in several modes and our company applies two. Low voltage cable conducting unit i.e., low voltage sealing sleeve is applied for the capacitance of max. 400kVA and the low voltage of single outgoing cable. The conventional low voltage sleeve is used for the low voltage of multi-cables and is placed into a enclosed housing. The multi-path technology is applied at the cable outlet to facilitate the cable installation and dis-assembly, which breaks away from the traditional method of asphaltum wrapping on low voltage sleeve.4. Temperature RiseAnother important issue is transformer temperature rise. Since underground transformer is installed in underground ditch or pit, the ventilation and heat dissipation are definitely worse than those on ground. We have considered in design the ambient temperature modification due to the enclosure that envelops the transformer. There is no national or industrial standard about underground transformer in China at present, so we refer to the parameters in Australian Standards AS1078(1984) Oil Dipping Transformer Load Guide and set the main performance parameters of

[Related Categories: ]
[Related Keywords: underground combined transformer, China, manufacturers, suppliers ]
Epoxy Resin Casting Dry-type Transformer Epoxy Resin Casting Dry-type Transformer

http://www.yb-electric.com------Yuebian Electric Co.,Ltd is one of the leading China epoxy resin casting dry-type transformer manufacturers and suppliers, welcome to check epoxy resin casting dry-type transformer price with us.5.SCB13-M.RL series F grade epoxy resin casting dry-type transformerSC(B)13 series F grade epoxy resin casting dry-type transformer performance indicators.table{ border-collapse:collapse;} .table td, .table th{ border:1px solid #cdcdcd; padding:5px;}.table{ border-collapse:collapse;} .table td, .table th{ border:1px solid #cdcdcd; padding:5px; word-break: break-all; word-wrap: break-word;}Capacity (kva)Grade 2Grade 1No-load loss(W)Load loss(W)Electrical steel stripAmorphous alloyElectrical steel stripAmorphous alloyB(100℃)F(120℃)H(145℃)No-load loss(W)Load loss(W)No-load loss(W)Load loss(W)B(100℃)F(120℃)H(145℃)B(100℃)F(120℃)H(145℃)301507067071076013560564068570630675720502159094010001070195845900965908959501015802951201290138014802651160124013301201225131014051003201301480157016902901330141515201301405149016 051253751501740185019803401565166517801501655176018801604301702000213022803851800191520601701900202521652004952002370253027104452135227524402002250240525752505752302590276029605152330248526652302460262028103157052803270347037306352945312533552803105329535454007 853103750399042807053375359038503103560379040655009303604590488052308354130439047053604360463549706301070420553058806290965497552905660420525555855975630104041056105960640093550505365576041043305660800121548065506960746010955895626567154806220661070851000141555 076508130876012756885731578855507265772583201250167065091009690103701505819087209335650864592059850160019607601105011730125801765994510555113207601049511145119502000244010001360014450155602195122401300514005100012920137251478025002880120016150171701845025901453 515455166051200153401631017525Description:SC(B)9 Series performance is equivalent to GB/T 10228-2008《dry-type power transformers technical parameters and requirements》A group performance indicatorsSC(B)10 series of product performance’s no load is reducing by 10% than the SC(B)9, load loss reduced by 5% than the SC(B)9.SC(B)11 series of product performance’s no-load loss is reducing by 20% than the of SC(B)9, load loss is reducing 5%, than the SC(B).

[Related Categories: ]
[Related Keywords: epoxy resin casting dry-type transformer, China, manufacturers ]
advertisements
Isolation Transformers Isolation Transformers

http://www.yb-electric.com------ Yuebian Electric Co.,Ltd is one of the leading China isolation transformers manufacturers and suppliers, welcome to check 3 phase isolation transformers, KVA isolation transformers price with us. General: Three-phase isolation transformer in power system not only has the variable function, but also isolate the grid on the equipment of third harmonic, primary and secondary and copper foil shield, effectively protect the interference of harmonics on equipment. Especially suitable for import and export equipment, which is suitable for communication between 50 ~ 0.1KVA-1600KVA, the input and output voltage of 60HZ is not more than 1600V. Product input and output voltage (three-phase or multi input and output, etc.), the connection mode, adjust the tap position, winding capacity allocation, secondary winding, the box (according to different use environment choice), can be according to user's requirements for the design and manufacturing. Production feature: 1.The new high-quality cold-rolled orientation silicon steel laminations mounted; H - resistant temperature 180 DEG enameled wire, bare coil winding has the advantages of beautiful appearance, junior subordinated and duct fan heat fast, galvanized tripod by special paint dipping process, vacuum impregnation, drying in oven. It can effectively reduce the vibration and noise, increase the electrical strength, and adopt new technology, such as high temperature insulation material design, and the introduction of new technology, so that the transformer is more energy saving, more quiet. Energy saving low noise coil to keep the ventilation slot, air flow, rapid and effective to reduce the temperature of the coil. Technical parameter: Capacity: 0.5KVA-1600KVA Input voltage: 380V Output voltage: 1140V 690V 660V 480V 460V 440V 415V 400V 380V 220V 200V 127V 110V 100V 48V 36V 24V 12V 1440V Voltage change rate: 1% Output waveform distortion: no distortion (compared with the input waveform) Insulation class: F grade, H grade (H grade) is 180 degrees temperature. Work efficiency: 98% Applicable frequency: 50/60Hz Connection mode: Y/ Y/Y Dyn11 Dzn0 Overload capacity: allow more than 1.5 times the rated load to work for 1 hours (can be a long full load) Noise: less than 35dB (within one meter) Temperature: less than or equal to 60 DEG C Insulation resistance: 150M ohm Anti electric strength: 3000VAC/1min Design life: 20 years Working environment: temperature: -20 ~ +50 temperature humidity: less than 95%RH without dew Workplace: no corrosive gas and conductive dust Safety standards: the product conforms to VDE0550, IEC439, JB5555, GB226 and other international standards. Cooling method: dry air cooling Stocking situation: regular 380V/220V have the spot please contact customer service

[Related Categories: ]
[Related Keywords: Isolation Transformers, China, manufacturers, suppliers, price ]
Molybdenum Boat Molybdenum Boat

http://www.bjsymetal.com------ Baoji Shengyuan Metal Material Co.,Ltd is one of the leading China molybdenum boat manufacturers and suppliers, equipped with a professional factory and company, welcome to wholesale qualitymolybdenum box products from us. Specification1. Standard: ASTM B760-2007 GB/T 3875-2006 2. Size: Drawings3. Pure: 99.95%4. Density: >=19.2g/c Dimensions Delivery condition Specification Tolerance   Thickness   Roughness (μm) Diameter Height Diameter Height Sinter 10~700 10~1000 ±5.0 ±5.0 5~30 Finished sinter 10~650 10~850 ±0.5 ±1.0 7~25 <2.5 Special sizes can be manufactured based on customers' requirements.ApplicationMolybdenum boats are widely used in Metallizing, Electron-beam Spraying as well as sintering annealing in reducing atmosphere in electronics, military and light industries. Molybdenum boat can be used to evaporate small lengths of wire or to evaporate materials which would not properly"wet" the surface of an evaporation filament.Dimensions and tolerance (According to clients’ requirements): T(mm) w(mm) Lth (mm) L1 Deep(mm) 0.3 10 100 60 1.5-2.0 0.2 15 100 60 1.5-2.0 0.3 15 100 60 1.5-2.0 0.5 15

[Related Categories: ]
[Related Keywords: Molybdenum Boat, molybdenum box, China, manufacturers, suppliers ]
advertisements
High Voltage Transformers High Voltage Transformers

http://www.yb-electric.com------Yuebian Electric Co.,Ltd is one of the leading China high voltage transformers manufacturers and suppliers, welcome to check high voltage transformers price with us.High voltage 10kv 11kv 3 phase 400/800/1200kva resin insulation dry type power transformer           Benefits:1. High mechanical strength and strong short circuit resistance ability;2. Good moisture resistance and run with 90% humidity;3. Advanced structure, small dimension, light weight and low partial discharge;4. High insulation level and equal electric field distribution;5. maintenance free;6. Run with 140% rated load under forced air cooling;7. Fireproof, explosion-proof, pollution-free and low-noise and able to be directly installed in the load center.Application:The product has been widely used in places with high fireproofing requirements, such as power transmission and transformation system, high-rise building, commercial center, sport stadium, petrochemical enterprise, metro, station and airport. In China, the epoxy resin cast dry-type power transformer has the richest manufacturing experience and the best running performance.Specification: Rated capacity(kVA)Voltage Combination(kV)Loss(kW)No-load current (%)Short circuit Impedance(%)temperature class of insulationGross Weight (kg)H.V.L.V.No-loadload(120℃)1011      10.5      10      6.3      60.40.150.330.54F/F130200.1850.634170300.220.753.2330500.311.062.8380630.371.282.7440800.4151.462.65101000.451.672.45901250.531.962.26501600.612.252.27802000.72.6829302500.812.92210403150.993.671.811804001.14.221.814505001.315.171.816306301.516.221.619006301. 466.311.6619008001.717.361.6229010001.998.611.4270012502.3510.261.4313016002.7612.41.4374020003.415.31.241502500418.181.2481031505.1422.518580040005.962717100

[Related Categories: ]
[Related Keywords: high voltage transformers, China, manufacturers, suppliers, price ]
Mining Explosion-proof Move Substation Mining Explosion-proof Move Substation

http://www.yb-electric.com------Yuebian Electric Co.,Ltd is one of the leading China mining explosion-proof move substation manufacturers and suppliers, welcome to check mining explosion-proof move substation price with us.1.KBSGZY Mining Explosion-proof Move SubstationKBSGZY series flameproof mobile substation is a movable sets for, substation equipment. It applies to a mixed gas of methane and coal dust explosion hazard of wells and mine environment, but also for not enough to corrode metal and destroy the insulation of gas and steam environment. flameproof mobile substation from the flameproof mobile substation for dry-type transformers, high voltage switches or high-voltage vacuum switches and low feed switch or low voltage protection box. with leakage , leakage lockout, overload, short circuit, over-voltage protection.TypeRated capacity(KVA)Rated voltage and tapping voltageLoss(w)No-load current(%)Short-circuit impedance(%)High-Voltage(KV)Tapping range(%)Low-voltage(KV)no-loadLoadKBSGZY100/61006

[Related Categories: ]
[Related Keywords: mining explosion-proof move substation, China, manufacturers ]
advertisements
High Voltage Transformers High Voltage Transformers

http://www.yb-electric.com------Yuebian Electric Co.,Ltd is one of the leading China high voltage transformers manufacturers and suppliers, welcome to check high voltage transformers price with us.High voltage 10kv 11kv 3 phase 400/800/1200kva resin insulation dry type power transformer           Benefits:1. High mechanical strength and strong short circuit resistance ability;2. Good moisture resistance and run with 90% humidity;3. Advanced structure, small dimension, light weight and low partial discharge;4. High insulation level and equal electric field distribution;5. maintenance free;6. Run with 140% rated load under forced air cooling;7. Fireproof, explosion-proof, pollution-free and low-noise and able to be directly installed in the load center.Application:The product has been widely used in places with high fireproofing requirements, such as power transmission and transformation system, high-rise building, commercial center, sport stadium, petrochemical enterprise, metro, station and airport. In China, the epoxy resin cast dry-type power transformer has the richest manufacturing experience and the best running performance.Specification: Rated capacity(kVA)Voltage Combination(kV)Loss(kW)No-load current (%)Short circuit Impedance(%)temperature class of insulationGross Weight (kg)H.V.L.V.No-loadload(120℃)1011      10.5      10      6.3      60.40.150.330.54F/F130200.1850.634170300.220.753.2330500.311.062.8380630.371.282.7440800.4151.462.65101000.451.672.45901250.531.962.26501600.612.252.27802000.72.6829302500.812.92210403150.993.671.811804001.14.221.814505001.315.171.816306301.516.221.619006301. 466.311.6619008001.717.361.6229010001.998.611.4270012502.3510.261.4313016002.7612.41.4374020003.415.31.241502500418.181.2481031505.1422.518580040005.962717100

[Related Categories: ]
[Related Keywords: high voltage transformers, China, manufacturers, suppliers, price ]
TPU Material Bracelet TPU Material Bracelet

http://www.zstpetpr.com------Shenzhen Zhongsuwang Plastic Products Co,.Ltd is one of the top level China tpu material bracelet manufacturers and suppliers, our factory is able to produce cheap and low price tpu material bracelet at reliable quality. Welcome to wholesale products from us.TPU material bracelet Kanplon daily supplies series, use the high quality raw materials, have excellent rebound elasticity and shockproof performance, feel comfortable, good elastic feeling, can improve product's touch feeling and non-skid performance, have good resistance to bending fatigue, hydrolysis resistance excellent weather resistance, some material meet the food grade requirements. Can be recycled, reduce the product cost; Can be used secondary injection with PP, PE, PS, ABS, PC, PA and so on, adhesive them tightly, also can separate molding, widely used in daily life supplies. Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: Kanplon Model Number: TU grade color: all color can supply hardness: 85A-100A surface: bright brand: Kanplon molding: injection material shape: pellets or granules applied area: skate shoes, toys, phone case and so onPackaging & Delivery Packaging Details   25kg/bagDelivery Details    within 5 daysTU grade typical properties – for bracelet (for reference, we can according to your sample to produce material) Hardness: 85 (shore A) Specific gravity: 1.2(g/10min) Tear strength: 31(mm/min) Tensile strength: 50(mm/min) Elongation at break: 700 Predrying temperature: 80℃ for 2 hours

[Related Categories: ]
[Related Keywords: TPU material bracelet, China, manufacturers, suppliers, factory ]
advertisements
TPU Material Face Washing TPU Material Face Washing

http://www.zstpetpr.com------Shenzhen Zhongsuwang Plastic Products Co,.Ltd is one of the top level China tpu material face washing manufacturers and suppliers, our factory is able to produce cheap and low price tpu material face washing at reliable quality. Welcome to wholesale products from us.TPU material wash face machine Kanplon daily supplies series, use the high quality raw materials, have excellent rebound elasticity and shockproof performance, feel comfortable, good elastic feeling, can improve product's touch feeling and non-skid performance, have good resistance to bending fatigue, hydrolysis resistance excellent weather resistance, some material meet the food grade requirements. Can be recycled, reduce the product cost; Can be used secondary injection with PP, PE, PS, ABS, PC, PA and so on, adhesive them tightly, also can separate molding, widely used in daily life supplies. Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: Kanplon Model Number: TU grade color: all color can supply hardness: 85A-100A surface: bright brand: Kanplon molding: injection material shape: pellets or granules applied area: skate shoes, toys, phone case and so onPackaging & Delivery Packaging Details   25kg/bagDelivery Details    within 5 daysTU grade typical properties – for wash face machine (for reference, we can according to your sample to produce material) Hardness: 65 (shore A) Specific gravity: 1.2(g/10min) Tear strength: 31(mm/min) Tensile strength: 50(mm/min) Elongation at break: 700 Predrying temperature: 80℃ for 2 hours

[Related Categories: ]
[Related Keywords: TPU material face washing, China, manufacturers, suppliers, factory ]
TPU Material Mobile Phone Case TPU Material Mobile Phone Case

http://www.zstpetpr.com------Shenzhen Zhongsuwang Plastic Products Co,.Ltd is one of the top level China tpu material mobile phone case manufacturers and suppliers, our factory is able to produce cheap and low price tpu material mobile phone case at reliable quality. Welcome to wholesale products from us.TPU material mobile phone case Kanplon daily supplies series, use the high quality raw materials, have excellent rebound elasticity and shockproof performance, feel comfortable, good elastic feeling, can improve product's touch feeling and non-skid performance, have good resistance to bending fatigue, hydrolysis resistance excellent weather resistance, some material meet the food grade requirements. Can be recycled, reduce the product cost; Can be used secondary injection with PP, PE, PS, ABS, PC, PA and so on, adhesive them tightly, also can separate molding, widely used in daily life supplies. Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: Kanplon Model Number: TU grade color: all color can supply hardness: 85A-100A surface: bright brand: Kanplon molding: injection material shape: pellets or granules applied area: skate shoes, toys, phone case and so onPackaging & Delivery Packaging Details   25kg/bag Delivery Details    within 5 daysTU grade typical properties – for mobile phone case (for reference, we can according to your sample to produce material) Hardness: 90 (shore A) Specific gravity: 1.2(g/10min) Tear strength: 31(mm/min) Tensile strength: 50(mm/min) Elongation at break: 700 Predrying temperature: 80℃ for 2 hours

[Related Categories: ]
[Related Keywords: TPU material mobile phone case, China, manufacturers, suppliers ]
advertisements
TPR Material Children Nipple Drinker TPR Material Children Nipple Drinker

http://www.zstpetpr.com------Shenzhen Zhongsuwang Plastic Products Co,.Ltd is one of the top level China tpr material children nipple drinker manufacturers and suppliers, our factory is able to produce cheap and low price tpr material children nipple drinker at reliable quality. Welcome to wholesale products from us.TPR material children nipple drinker Kanplon daily supplies series, use the high quality raw materials, have excellent rebound elasticity and shockproof performance, feel comfortable, good elastic feeling, can improve product's touch feeling and non-skid performance, have good resistance to bending fatigue, hydrolysis resistance excellent weather resistance, some material meet the food grade requirements. Can be recycled, reduce the product cost; Can be used secondary injection with PP, PE, PS, ABS, PC, PA and so on, adhesive them tightly, also can separate molding, widely used in daily life supplies. Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: Kanplon Model Number: TR grade color: transparent hardness: 0A-100A surface: shinning brand: Kanplon molding: injection material shape: pellets or granules applied area: ice cube trays, suction cups, toys and so onPackaging & Delivery Packaging Details   25kg/bagDelivery Details    within 5 daysTR grade typical properties – for children nipple drinker (for reference, we can according to your sample to produce material) Hardness: 85 (shore A) Specific gravity: 0.9(g/10min) Tear strength: 40(mm/min) Tensile strength: 65(mm/min)Elongation at break: 900

[Related Categories: ]
[Related Keywords: TPR material children nipple drinker, China, manufacturers, suppliers ]
TPE Material Plastic Funnel TPE Material Plastic Funnel

http://www.zstpetpr.com------Shenzhen Zhongsuwang Plastic Products Co,.Ltd is one of the top level China tpe material plastic funnel manufacturers and suppliers, our factory is able to produce cheap and low price tpe material plastic funnel at reliable quality. Welcome to wholesale products from us.TPE material plastic funnel Kanplon daily supplies series, use the high quality raw materials, have excellent rebound elasticity and shockproof performance, feel comfortable, good elastic feeling, can improve product's touch feeling and non-skid performance, have good resistance to bending fatigue, hydrolysis resistance excellent weather resistance, some material meet the food grade requirements. Can be recycled, reduce the product cost; Can be used secondary injection with PP, PE, PS, ABS, PC, PA and so on, adhesive them tightly, also can separate molding, widely used in daily life supplies. Quick Details Place of Origin: Guangdong, China (Mainland) Brand Name: Kanplon Model Number: TS grade color: all color can supply hardness: 0A-100A surface: matte, less light brand: Kanplon molding: injection material shape: pellets or granules applied area: baby carriage wheels, stationery, toys, sports bottles, scuba diving equipment, gear and so onPackaging & Delivery Packaging Details   25kg/bagDelivery Details    within 5 daysTS grade typical properties – for plastic funnel (for reference, we can according to your sample to produce material) Hardness: 50 (shore A) Specific gravity: 1.1(g/10min) Tear strength: 40(mm/min) Tensile strength: 76(mm/min)Elongation at break: 850

[Related Categories: ]
[Related Keywords: TPE material plastic funnel, China, manufacturers, suppliers, factory ]
advertisements
Double Row Diamond Grinding Wheel Double Row Diamond Grinding Wheel

http://www.saliabrasive.com------If you are planning to import MPA, OSA, EN12413, or SALI double row diamond grinding wheel from a professional seller or factory, or if you are looking for OEM double row diamond grinding wheel from a Zhejiang factory or Yongkang factory, please feel free to contact PENGCHENG, we are one of the leading China double row diamond grinding wheel manufacturers and suppliers.Quick Details Brand Name: SALI double row diamond grinding wheel Model Number: double row diamond grinding wheel Shape: Flat-Shaped Abrasive: Diamond Bonding Agent: Other Hardness: Standard Viscosity: Electroplated Bond Diamond Size: 105mm-180mm, 115mm,125mm,150mm,180mm Shank: metal powder and diamond particles Segment: 65mn manganese Grinding Object: stone,glass,marble,and non metal Item No: Turbo diamond grinding disc, concrete grinding disc wheel Type: Single row ,Double row, Turbo Sample: free OEM&ODM: yes Market: European,south American,African,Middle East Segment size: 7mm Packaging & DeliveryPackaging Details:Double Blister each piece of double row diamond grinding wheel, several pieces per export carton,Delivery Detail:30 work days for one container of diamond grinding disc ApplicationDiameterSegment Height (mm)SegmentThickness(mm)Segment No.Arbor(mm)Double row diamond grinding wheel105mm(4")5716M14,5/8"-11,22.23115mm(4.5")5718M14,5/8"-11,22.23125mm(5")5720M14,5/8"-11,22.23150mm(6")5         724M14,5/8"-11,22.23180mm(7")5728M14,5/8"-11,22.23Specification of double row diamond grinding wheel 1.Shank Material:65Mn 2.Segment Size:7mm 3.Type:Turbo,Single row, double row 4.Quality of Bond (Sentered):cold pressed,hot pressed, laser welding,silver welding. Diamond Grit Size (Mesh Size):30/40,40/50, 50/60,60/80 5.Diamond Concentration: 20% - 30% 6.HRB : 85-1057.Application:Used for grinding marble, granite, stone, ceramic, concrete, asphalt ,brick.Features of double row diamond grinding wheel 1.Long working life and cost saving 2.High Efficiency, Excellent Balance 3.Customized sizes are welcome. 4.Fast Delivery, Strong Protective Packaging5.Low-noise,no-dust,friendly surroundings,safety operation

[Related Categories: ]
[Related Keywords: double row diamond grinding wheel, China, manufacturers, suppliers ]
DGM6126 DGM6126

http://www.dgmmotor.com------If you are looking for dgm6126 suppliers, we can assure you that our service is of high-quality, and you can get more details on our website. If you are looking for dgm6126 suppliers, we can assure you that our service is of high-quality, and you can get more details on our website.

[Related Categories: ]
[Related Keywords: DGM6126, China, manufacturers, suppliers, brands, high-quality, price ]
1 2 3 4 5 6 7 8 9 10  >> 
Scroll