Add New Product | My Products | Free Product Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "CJ"
advertisements
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
advertisements
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
advertisements
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
advertisements
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
advertisements
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
advertisements
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
advertisements
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine CJHZ1610,CJHZ1616,CJHZ2016 CNC High Speed Plate Drilling Machine

http://www.supertimecncmachines.com------CJHZ1610,CJHZ1616,CJHZ2016 CNC High speed plate drilling machineA. ApplicationThe machine is mainly used in steel structure drilling in construction, bridge, tower etc., and can be used in pipe and plate of boiler, petro line, baffle plate and round flange. And the machine can be used drilling through-hole, blind hole, ladder hole, chamfer for hole-end with Max clamp scope 1600×1000mm.B. Characteristicsa. CNC slide way drilling spindle (Z axis) with wrokpiece of stroke is pre-set, realized auto switch. It can drill not only through-hole, but also blind-hole with characteristic of high efficiency, simple-structure, low-cost maintenance, easy operation etc.b. This machine the workpiece is tight by hydraulic clamp cards, the operation of the workers with foot switch control, easy to operate, and effort; the largest single piece of up to 1600×1000mm, small workpieces can be clamped to the four corners of the table, and can significantly shorten the production preparation period, improve production efficiency. c. This machine is a total of three CNC axes: gantry mobile (x-axis); drilling power head in the mobile gantry beam (y-axis); of the advance and retreat movement of the spindle (z axis). Each CNC axes using precision linear rolling guide oriented AC servo motor and ball screw drive. The movement is flexible, accurate positioning. d. This machine is more than a splint group, clamping it was easier to design are taken into consideration when processing circular plate of the boiler industry, hole-intensive, so the work on stage scale steel ruler and a small support block, according to the work piece position of the hole size mobile support blocks, to escape the position of the hole.e. CNC adopt SIMENS 808D control, equipped with a host computer to facilitate the storage and input of the workpiece program, easy to operate.f. The configuration of the machine tool ball screws, linear guides, electrical, servo motor, inverter, etc., are well-known foreign manufacturers supply. Failure Boot rate.Product ParameterFunction High Speed Drilling ModelCJ HZ 1610CJ HZ 1616CJHZ2016Max. workpiece size (L×W): 1600×1000mm 1600X1600mm2000x1600mmTaper hole of spindleBT40Max. drilling diameter : Φ5- φ40mm Drill depth (when using carbide drill workpiece does not allow overlay)≤80mmThe rotation speed:30 ~ 3000r/minThe max. Feeding stoke:150mmFeeding speed (servo feeding): 20 ~ 200mm/min   Hydraulic clampingClamping force: 7500N Clamping thickness: 15 ~ 80mm Number of clamps: 12 pieces Pressure of hydraulic system: 6MPa The specification of the motorDrilling head: 15/22 kW Servo motor of X axis: 2.0 kW Servo motor of Y axis: 1.5 kW Servo motor of Z axis:2.0 kWMoving speed of X and Y axes:10m/minMoving speed of Z axes:5m/minThe precision of position0.08mm

[Related Categories: ]
[Related Keywords: CJHZ1610, CJHZ1616, CJHZ2016 CNC High Speed Plate Drilling Machine, CJ ]
advertisements
Cj 121 Walking Tractor (s195 Engine) Cj 121 Walking Tractor (s195 Engine)
Changjiang 121 walking tractor is with the function of both towing and driving and its power is 12 horsepower. It is simple in structure, reliable on usage and easy to operate. And it is widely used for plowing, rotary-cultivating, harrowing, soil-pulverizing, irrigating and others in paddy fields, arid land in plains, hills and mountain areas.
[Related Categories: Truck & Parts ]
[Related Keywords: CJ, 121, walking, Tractor, (s195, ENGINE), 121, walking, Tractor, S195, engine ]
Cj Sweet Fashion Cj Sweet Fashion
Specifications: Size: One size Color: Purple, blueSupply Ability: 99
[Related Categories: Shirts & Blouses ]
[Related Keywords: CJ, Sweet, fashion, Sweet, fashion ]
advertisements
CJ Women Fashion Footwear CJ Women Fashion Footwear
Specifications: size: 5,6,7,8,9 / 35,36,37,38,39 color: white & yellow heel: 2cm I have already try on this shoes , it is comfortable and comfortable. Before you want to order for wholesale , you may ask for buying the sample, try it on, to see the quality Certification(s): pu+bow
[Related Categories: Women's ]
[Related Keywords: CJ, women, fashion, Footwear, women, fashion, Footwear ]
1
Scroll