Liquid solvent cleaner for braking system
& lt; /p>
• Cleans system from used brake fluid, oil, grease, dust and dirt caused by braking that will lead to wear, squeaky noise and jammed parts
• Fast evaporation without residue.
• Dissolves oily dirt, grease, oil, varnish, crust, carbon, dust, glue, etc.
• Does not contain chlorine. CFC-Free - Ozone friendly.
• Easy for use in aerosol can packaging.
How to use:
1. Shake before use. Use with or without extension tube & spray directly into brake parts.
2. Repeat application if necessary until all surfaces are cleaned.
3. Repeat application periodically for routine maintenance.
Packaging: 500 ml Aerosol Can
NdFeB magnet is mainly made from neodymium, iron and boron. It is used as an ideal magnet in instruments and motors and etc. With high intrinsic coercive force and high working temperature
NdFeB magnet is used as an ideal magnet in instruments and motors, mini-motor, magnetic transmission machine, medical apparatus, aviation, electronics and etc.
For NdFeB, if left it exposed, the iron in the magnet will rust. To protect the magnet from corrosion, it is usually preferable for the magnet to be coated. There are a variety of options for coating, but nickel is the most common and usually preferred. Some other options for coating are zinc and epoxy.
SmCo magnet has high property with low temperature coefficient. It operation temperature reaches 350 oC. And it’s no need to be plated because of its high anti-erosion and anti-oxidization.
SmCo magnet is widely used in motors, instrument, transducers, positional detector, generators, radar and other hi-tech industry.
The elements of Ferrite magnet are ferric oxide barium strontium. Ferrite has higher coercive force and higher resistance to demagnetized and oxidized than other non-rare earth permanent magnet.
The biggest advantage of such magnet is their low cost. It is widely used from motors and loudspeakers to toys and craft etc….
AlNiCo magnet is an alloy of aluminum-nickel-cobalt, which has excellent temperature stability and corrosion resistance. It can be used in motor, sensor, separator, loudspeaker and holding system etc…..
0 to 174 psig; 0 to 1.2MPa; 0 to 12 bar
1.5%FS Total Accuracy
Programmable ASIC to meet customer specifications
Low part count enhances reliability
Amplified and temperature compensated
Model 671 incorporates MEMS technology and custom Application Specific Integrated Circuit (ASIC) technology in the design. It is specifically designed for tough automotive application.
Based on the piezo resistive principle two pressure sensor elements transform two system pressures into electrical output signals proportionally to the pressure.
Model 671 is designed to perform in the underhood harsh environment such as temperature extremes, vibration, thermal and mechanical shock, and corrosive chemical. Please contact us for special design to meet your requirements.
1) Materials: semi-metal, asbestos free
2) No noise
3) No dust
4) Less fade
5) Life: more than 30,000km distance
7) Various specifications according to customers' requirements
8) FMSI available
Side-pull brake for BMX, MTB, ATB
Steel caliper brake arms
Finish: CP, ED, Color
Steel V-brake arm length: 150mm
Standard color: ED, CP
Rubber pad: 50-70mm
Mountain bicycle handle
Material: reinforced resin, steel insert lever
suitable for V-brake, 2finger return spring
Lady bicycle handle
Material: light-alloy lever, steel bracket
Suitable for: 3 finger, lady bike
Material: light alloy
Suitable for: V-brake, 3/4finger, return spring
our products are produced according to the ISO9000 international quslity system.
The main products are brake pads of non-asbestos semi-metallic ,non-asbestos,non-asbestos ceramic,composite fiber,carbon fiber,
Copper,carbon,iron,paper series etc.with better formulation technology, our brake pads have stable friction performance ,low wearing,long use life .1000 types
Of brake pads for various vehicles are available.if you want to apprehensible
More products,please visit our website at http://huahongyongshen.diytrade.com
We are a professional manufacturer of brake hose in China. Our main products including below: A BRAKE HOSE 3.2mmx10.5mm 1/8" HL SAE J1401 (two layer white rayon reinforced). 3.2mmx10.5mm 1/8" HL SAE J1401 (two layer red and one layer white rayon)3.2mmx10.5mm 1/8" HL SAE J1401 (three layer red rayon reinforced). Others like 4mmx12mm, 4.8mmx12.5mm etcAir Brake Hose, air conditioning hoseStainless Steel Braided Brake Hose 3.2mmx7.5mmB. BRAKE HOSE FITTING (according to samples or drawings) C. BRAKE HOSE ASSEMBLY (according to samples or drawings)Our brake hose can be used on any hydraulic brake system of car, motorcycle, scooter, ATV, snowmobiles, forklift, light truck and three wheelers etc.Our main product hydraulic brake hoses have the advantage of a firm agglutinate between the outer rubber and the yarns, which resist brake fluid, ageing and leakage.Our products have gotten the following certificate: DOT CCC ISO9001:2000. We have established close business relationship with more than thirty countries by the excellent quality and the competitive price.It will be a great pleasure to receive your inquires against which we will sent you our best quotation. We are looking forward to your prompt reply. Yours faithfullyMiss Shan