Add New Product | My Products | Free Product Alert

Keyword "Acrylic Processing Aid"
advertisements
PA-828 Acrylic processing aid PA-828 Acrylic processing aid

Polyacrylate processing aid is  a polymer polymerized by one or  ; ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;am p;nb sp;will lead to the difference of&am p;am p;nb sp;the plasticizing, melt strength of& ; ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ; ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;a mp;n bsp;widely used in clear and opaque& amp; amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; amp; nbsp;products.

Standard technical data

Type

Appearance

Viscosity

Volatile Contents

Granularity

YM-401

White free-flow powder

3.5-4.2

≤1.3%

≥98%

25 meshes standard sieve

YM-128

5.0-6.0

YM-125

8.0-10.0

YM-P20

2.5-3.2

YM-175

3.0-4.0

YM-K40

5.0-6.0

YM-51

≥10.5

YM-81

≥10.5

YM-91

≥10.0

Comparison sheet 

Type

Comparison Type

YM-128

PA828 of LG Chemical

YM-125

K125 of Rohm&Haas

YM-P20

PA-20 of Kaneka

P551 of Arkema

K-120n of Rohm&Haas

YM-91

K435 of Rohm&Haas

PA-630 of Kaneka

YM-K40

K-400 of Rohm&Haas

PA930 of LG Chemical

YM-175

K-175 of Rohm&Haas

PA-101 of Kaneka

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: pvc-u processing aid, U-PVC processing aid, K-125, plastic processing aid, pvc processing aid, Acrylic Processing Aid, PA-828, PA-828 Acrylic processing aid ]
K-125 pvc processing aid K-125 pvc processing aid

Polyacrylate processing aid is  a polymer polymerized by one or  ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;nb sp;will lead to the difference of&am p;nb sp;the plasticizing, melt strength of& ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;n bsp;widely used in clear and opaque& amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; nbsp;products.

Standard technical data

Type

Appearance

Viscosity

Volatile Contents

Granularity

YM-401

White free-flow powder

3.5-4.2

≤1.3%

≥98%

25 meshes standard sieve

YM-128

5.0-6.0

YM-125

8.0-10.0

YM-P20

2.5-3.2

YM-175

3.0-4.0

YM-K40

5.0-6.0

YM-51

≥10.5

YM-81

≥10.5

YM-91

≥10.0

Comparison sheet 

Type

Comparison Type

YM-128

PA828 of LG Chemical

YM-125

K125 of Rohm&Haas

YM-P20

PA-20 of Kaneka

P551 of Arkema

K-120n of Rohm&Haas

YM-91

K435 of Rohm&Haas

PA-630 of Kaneka

YM-K40

K-400 of Rohm&Haas

PA930 of LG Chemical

YM-175

K-175 of Rohm&Haas

PA-101 of Kaneka

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: ACR processing aid, chemical additive, pvc additive, plastic additive, plastic processing aid, Acrylic Processing Aid, pvc processing aid, K-125, k-125 pvc processing aid ]
advertisements
K-125 Acrylic processing aid K-125 Acrylic processing aid

Polyacrylate processing aid is a polymer polymerized by one or several kinds of acrylate monomer, which can speed up the fusion of PVC resin, increase the melt strength and uniformity, abate fracture and exudation of the fondant without bad influence of the mechanical properties of PVC. So the processing aid has been widely used in the PVC products. Different kinds of Acrylate monomer and the various proportions will lead to the difference of the plasticizing, melt strength of the Acrylic processing aid. If the viscosity of the processing aid is higher, plasticizing will be lower and melt strength higher. PVC processing aid has no obvious influence on the tensile strength and Vicat softening point, while PVC processing aid with high viscosity will increase the tensile strength and Vicat softening point. Acrylic processing aid can be widely used in clear and opaque PVC profile, PVC pipe, PVC board, PVC sheet, PVC film and WPC products. Standard technical data Type Appearance Viscosity Volatile Contents Granularity YM-401 White free-flow powder 3.5-4.2 ≤1.3% ≥98% (25 meshes standard sieve) YM-128 5.0-6.0 YM-125 8.0-10.0 YM-P20 2.5-3.2 YM-175 3.0-4.0 YM-K40 5.0-6.0 YM-51 X 05;10.5 YM-81 ≥10.5 YM-91 ≥10.0 Comp arison sheet Type Comparison Type YM-128 PA828 of LG Chemical YM-125 K125 of Rohm&Haas YM-P20 PA-20 of Kaneka P551 of Arkema K-120n of Rohm&Haas YM-91 K435 of Rohm&Haas PA-630 of Kaneka YM-K40 K-400 of Rohm&Haas PA930 of LG Chemical YM-175 K-175 of Rohm&Haas PA-101 of Kaneka

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: plastic processing aid, pvc-u processing aid, PA-828, pvc processing aid, Acrylic Processing Aid, K-125 ]
PVC processing aid PA-828 PVC processing aid PA-828

Polyacrylate processing aid is  a polymer polymerized by one or  ; ; ; ; ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;a mp;a mp;a mp;a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ; ; ; ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;am p;am p;am p;am p;nb sp;will lead to the difference of&am p;am p;am p;am p;am p;nb sp;the plasticizing, melt strength of& ; ; ; ; ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ; ; ; ; ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;am p;am p;am p;am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; amp; amp; amp; amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;a mp;a mp;a mp;a mp;n bsp;widely used in clear and opaque& amp; amp; amp; amp; amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; amp; amp; amp; amp; nbsp;products.

Standard technical data

Type

Appearance

Viscosity

Volatile Contents

Granularity

YM-401

White free-flow powder

3.5-4.2

≤1.3%

≥98%

25 meshes standard sieve

YM-128

5.0-6.0

YM-125

8.0-10.0

YM-P20

2.5-3.2

YM-175

3.0-4.0

YM-K40

5.0-6.0

YM-51

≥10.5

YM-81

≥10.5

YM-91

≥10.0

Comparison sheet 

Type

Comparison Type

YM-128

PA828 of LG Chemical

YM-125

K125 of Rohm&Haas

YM-P20

PA-20 of Kaneka

P551 of Arkema

K-120n of Rohm&Haas

YM-91

K435 of Rohm&Haas

PA-630 of Kaneka

YM-K40

K-400 of Rohm&Haas

PA930 of LG Chemical

YM-175

K-175 of Rohm&Haas

PA-101 of Kaneka

[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: chemical, pvc additive, plastic additive, PA-828, K-125, Acrylic Processing Aid, pvc processing aid ]
advertisements
Acrylic processing aid  K-125 Acrylic processing aid K-125

Polyacrylate processing aid is  a polymer polymerized by one or  ; ; ; ; ; ; ; ; ;several kinds of acrylate monomer,  which can speed up the fusion o f PVC resin, increase the melt  strength and uniformity, abate fracture&a mp;a mp;a mp;a mp;a mp;a mp;a mp;a mp;n bsp;and exudation of the fondant wit hout bad influence of the mechanical  properties of PVC. So the proc essing aid has been widely used  ; ; ; ; ; ; ; ; ;in the PVC products.

Different kinds of Acrylate monomer and the various proportions&am p;am p;am p;am p;am p;am p;am p;am p;nb sp;will lead to the difference of&am p;am p;am p;am p;am p;am p;am p;am p;nb sp;the plasticizing, melt strength of& ; ; ; ; ; ; ; ;nbs p;the Acrylic processing aid. If the  viscosity of the processing aid& ; ; ; ; ; ; ; ;nbs p;is higher, plasticizing will be lo wer and melt strength higher. PVC&am p;am p;am p;am p;am p;am p;am p;am p;nb sp;processing aid has no obvious influence on the tensile strength and Vicat soft ening point, while PVC processing ai d with high viscosity will increase& amp; amp; amp; amp; amp; amp; amp; amp; nbsp;the tensile strength and Vicat  softening point.

Acrylic processing aid can be&a mp;a mp;a mp;a mp;a mp;a mp;a mp;a mp;n bsp;widely used in clear and opaque& amp; amp; amp; amp; amp; amp; amp; amp; nbsp;PVC profile, PVC pipe, PVC boar d, PVC sheet, PVC film and WPC& amp; amp; amp; amp; amp; amp; amp; amp; nbsp;products.

Standard technical data

Type

Appearance

Viscosity

Volatile Contents

Granularity

YM-401

White free-flow powder

3.5-4.2

≤1.3%

≥98%

25 meshes standard sieve

YM-128

5.0-6.0

YM-125

8.0-10.0

YM-P20

2.5-3.2

YM-175

3.0-4.0

YM-K40

5.0-6.0

YM-51

≥10.5

YM-81

≥10.5

YM-91

≥10.0

Comparison sheet 

Type

Comparison Type

YM-128

PA828 of LG Chemical

YM-125

K125 of Rohm&Haas

YM-P20

PA-20 of Kaneka

P551 of Arkema

K-120n of Rohm&Haas

YM-91

K435 of Rohm&Haas

PA-630 of Kaneka

YM-K40

K-400 of Rohm&Haas

PA930 of LG Chemical

YM-175

K-175 of Rohm&Haas

PA-101 of Kaneka

[Related Categories: Chemical Additives, Auxiliary, Chemical Additives, Auxiliary ]
[Related Keywords: pvc-u processing aid, PA-828, K-125, pvc processing aid, Acrylic Processing Aid ]
PVC processing aid YM-401 PVC processing aid YM-401

YM-401 is PVC processing aid .Its basic function is to improve the processing property and the fusion of the PVC.

 

  • Advantages:
    • Improve product quality in surface gloss and finish, more even thickness and weight, weld-line strength, tensile strength and impact efficiency
    • Permits broad range of processing temperatures and conditions
    • To get improved melt-elasticity and reduction of plate-out and melt fracture
    • Excellent dispersibility and good optical properties, under low-shear processing conditions
    • Improve process ability of high-molecular-weight PVC resin without significantly affecting its physical and chemical properties
    • Increases production output and improves yield
    • Low dosage and high efficiency
  • Application field:
    • PVC building applications, such as window profiles, panels, sidings, fences, pipes, fittings, injected parts and PVC foam products
  • Recommendation usage:
    • 1.0 to 1.5phr per 100 PVC resin
  • Packaging:
    • 25kg/bag, PP bag with PE liner
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: Acrylic Processing Aid ]
advertisements
PVC Acrylic Impact Modifier ED-401A ED-401B ED-401C ED-401D PVC Acrylic Impact Modifier ED-401A ED-401B ED-401C ED-401D

 

Product Name
ACR ED-401
Category
PVC Processing Aid
 
Technical Specification

Items
ED-401A
ED-401B
ED-401C
Appearance
White powder
White powder
White powder
Surface density(g/cm3)
0.40-0.55
0.40-0.50
0.40-0.55
Volatility (%)
≤1.0
≤1.0
≤1.0
Viscosity (η) (Ubbelohde Viscometer)
2.5-3.2
4.8-5.3
7.0-9.5
Granularity(0.45mm,40meshes)
≥98%
≥98%

 
General Information
ACR ED-401 series are white amorphous powders. They have good weather resistance, high impact-resisting strength, heat stability, and low percent thermal shrinkage, can promote plastication of PVC resin, decrease process temperature and brings excellent surface quality to finished products.
 
Application
ED-401A is mainly used in producing PVC transparent sheets, films, etc.
ED-401B is general purpose and suitable for PVC profiles, pipes and fittings, etc.
ED-401C is suitable for producing PVC foam-sheet, foam pipes, decorating plates, etc.
The recommended dosage is 1-4 phr for 100 phr PVC resin.
ED-401D is suitable to all kinds of products of PVC, such as rigid calendered film and sheets, rigid bottles, window profiles etc.

The recommended dosage is 0.5-1 phr for 100 phr PVC resin.

Package, Storage & Transportation
N.W.25KG,double-layer packed, first packed in airproof plastic bag, then in woven bags. Store in a dry ventilated place and avoid light and rain. Handle and transport in accordance with general regulations.
[Related Categories: High Polymers, Inorganic Acid, Chemical Additives, Auxiliary ]
[Related Keywords: chemical auxiliary, plastic additives, pvc auxiliary, PVC additives, impact modifier ACR, AIM, Acrylic Processing Aid, Acr, pvc processing aid, acrylic impact modifier ]
Acrylic Processing Aid (ACR-401) Acrylic Processing Aid (ACR-401)
Introduction:
   ACR-401 is acrylic copolymer that can be used in all kinds of PVC processing. It can promote plastication and decrease processing temperature and fusion time, improve melt strength and homogeneity, get better surface with higher gloss,ACR-401 is white powder and can dissolve in Ethyl, Ketene and Chlorinated Hydroarbon but not in water and Alcohol. 
  
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: Acrylic Processing Aid, ACR-401, chemicals ]
1