Add New Product | My Products | Free Product Alert
Sell Offers | Buy Offers | Products | Companies

Keyword "agent"
advertisements
Fluorescent Whitening Agent Fluorescent Whitening Agent
Structure: diphenyl ethylene bi-benzene oxazle Technical data: 1) Appearance: powder in yellow 2) Melting point: ≥359°C 3) Purity: ≥98% 4) Fineness: more than 300 mesh Performance and characteristics: 1) Strong whitening effect and strong fluorescent effect 2) Wide application in whitening polyester, nylon fibers and various plastics 3) Excellent high temperature resistant performance Scope of application: 1) Fits for whitening polyester fibers, nylon fibers and polypropylene 2) Fits for whitening and brightening polypropylene plastics, hard PVC, ABS, EVA, polystyrene, polycarbonate 3) Fits for routine polymerization of polyester and nylon Method of application: 1) Suggested amount: whitening agent OB-1 in every 1,000kg materials 2) 75 - 200g for EVA, polypropylene, nylon, polycarbonate and so on 3) 150 - 300g for polyester short fiber Packing and storage: 1) Paper box 1kg x12 or 2kg x 5, 20kg iron box, or subject to users' requirements 2) Stored in a cool and dry place and away from sunlight Precautions: The written materials on this product are for reference only or a source for research and appraisement. We assume no responsibility for any disputes arising from the liabilities or patents of such materials. Please contact us for any technical problem or problems in use.
[Related Categories: Chemicals Agents ]
[Related Keywords: Fluorescent, whitening, agent, Fluorescent, whitening, agent ]
Fluorescent Whitening Agent Fluorescent Whitening Agent
Structure: diphenyl ethylene bi-benzene oxazle Technical data: 1) Appearance: powder in yellow 2) Melting point: ≥359°C 3) Purity: ≥98% 4) Fineness: more than 300 mesh Performance and characteristics: 1) Strong whitening effect and strong fluorescent effect 2) Wide application in whitening polyester, nylon fibers and various plastics 3) Excellent high temperature resistant performance Scope of application: 1) Fits for whitening polyester fibers, nylon fibers and polypropylene 2) Fits for whitening and brightening polypropylene plastics, hard PVC, ABS, EVA, polystyrene, polycarbonate 3) Fits for routine polymerization of polyester and nylon Method of application: 1) Suggested amount: whitening agent OB-1 in every 1,000kg materials 2) 75 - 200g for EVA, polypropylene, nylon, polycarbonate and so on 3) 150 - 300g for polyester short fiber Packing and storage: 1) Paper box 1kg x12 or 2kg x 5, 20kg iron box, or subject to users' requirements 2) Stored in a cool and dry place and away from sunlight Precautions: The written materials on this product are for reference only or a source for research and appraisement. We assume no responsibility for any disputes arising from the liabilities or patents of such materials. Please contact us for any technical problem or problems in use.
[Related Categories: Chemicals Agents ]
[Related Keywords: Fluorescent, whitening, agent, Fluorescent, whitening, agent ]
advertisements
Desizing Agent (Textile auxiliaries) Desizing Agent (Textile auxiliaries)
Specifications: It is great pleasure and honour to introduce the current activities and major products of daesung chemical ind. If there is anything we can do for you Please do not hesitate contact us!! Sclean-h 1. Can remove easily the synthetic sizers for the used of wjl fibers 2. Superior removing effect for oil spot. Various stain 3. Preventing readhesion of removed impurities. Sclean an 1. Excellent desizing, scouring, penetration agent for all kind of fibers 2. Good alkali stability 3. Can be obtained bright color shade after washing-off and low foaming type Sclean 606 1. Excellent desizing, scouring and good alkali stability 2. Improving dispersion, color shade removing oligomer metal and graphite containing impurities iron all type of fabric 3. Multi-functional type agent Thank you and Have a wonderful day!!DAESUNG Payment Terms: L/C Certification(s): ISO 9001/9002Supply Ability: 2000tons
[Related Categories: Chemicals Agents ]
[Related Keywords: Desizing, agent, (Textile, Auxiliaries), Desizing, agent, textile, auxiliaries ]
Desizing Agent (Textile auxiliaries) Desizing Agent (Textile auxiliaries)
Specifications: It is great pleasure and honour to introduce the current activities and major products of daesung chemical ind. If there is anything we can do for you Please do not hesitate contact us!! Sclean-h 1. Can remove easily the synthetic sizers for the used of wjl fibers 2. Superior removing effect for oil spot. Various stain 3. Preventing readhesion of removed impurities. Sclean an 1. Excellent desizing, scouring, penetration agent for all kind of fibers 2. Good alkali stability 3. Can be obtained bright color shade after washing-off and low foaming type Sclean 606 1. Excellent desizing, scouring and good alkali stability 2. Improving dispersion, color shade removing oligomer metal and graphite containing impurities iron all type of fabric 3. Multi-functional type agent Thank you and Have a wonderful day!!DAESUNG Payment Terms: L/C Certification(s): ISO 9001/9002Supply Ability: 2000tons
[Related Categories: Chemicals Agents ]
[Related Keywords: Desizing, agent, (Textile, Auxiliaries), Desizing, agent, textile, auxiliaries ]
advertisements
Flame Retardant Agent (LISIDE CU) Flame Retardant Agent (LISIDE CU)
Brief introduction: liside CU is an efficient cyclic phosphonate flame retardant for the treatment of textile products. It is non-corrosive with high phosphorus content, excellent water solubility on a wide range of fabric type. It mainly used in furnishing, curtaining, building, special workwear and automotive applications. It is particularly suitable for the treatment of polyester fabric, T/C blends and PU coating to impart a finish that is durable to washing and dry-cleaning. Specifications: 1) Appearance: clear highly viscous liquid 2) Color number: 100 max. 3) Phosphorus (Wt%): 20.5% min. 4) Acid Number (mg, KOH/g): 15 max. 5) Density (g/cc at 25deg;C): 1.21.3 6) Viscosity at 20°C (Cps): 150,000 max. 7) Flash point: 165°C 8) DMMP assay (Wt%): 0.5% max. 9) TMPP assay (Wt%): 0.5% max. 10) Durable to washing times: 50 times min. Properties: 1) High heat stability and good retain of hand feel and drape after processing 2) Low volatility and good compatibility to major polymer 3) Little discoloration after treatment 4) High durability to washing and good retain of color brightness 5) Non-toxicity and high safety Typical application process: 1) Treatment of polyester fabric and T/C blends a) Recommendatory formulation: i) Flame retardant: 6 - 15kg ii) Added water, 20kg: stirred evenly iii) Added 20% conc. Na2HPO4 or Na2CO3: 4 - 8kg pH is buffered to 5.5 - 6.5 or 25% conc. aqua ammonia iv) Added penetrating agent: 0.05 - 0.2kg mixed evenly v) Additional water: diluted by water to 100kg b) Procedure: i) Fabric for treatment with flame retardant should be clean and absorbent. Starch and other sizes should be removed before processing ii) Fabric shall be treated by padding, dipping according to fabric composition, weight and construction iii) 120 - 140°C x 60sec., pre-drying iv) High temperature thermo-fixation process v) Cooling, rolling up the treated fabric. To improve the hand feel, fabric can be cleaned again if necessary to remove the un-affixed flame retardant on the fabric 2) Coating treatment of polyester fabric and PU fabric a) The formulation is dried and cured in a single pass at 150°C for 120 seconds b) The formulation is buffered to pH 5 using sodium carbonate. The added amount of soda ash is about 0.4% Attention: The information of our products is for reference only. We are not responsible for any unexpected results or patent dispute caused by it
[Related Categories: Chemicals Agents ]
[Related Keywords: Flame, Retardant, agent, (LISIDE, CU), Flame, Retardant, agent, LISIDE ]
Flame Retardant Agent (LISIDE CU) Flame Retardant Agent (LISIDE CU)
Brief introduction: liside CU is an efficient cyclic phosphonate flame retardant for the treatment of textile products. It is non-corrosive with high phosphorus content, excellent water solubility on a wide range of fabric type. It mainly used in furnishing, curtaining, building, special workwear and automotive applications. It is particularly suitable for the treatment of polyester fabric, T/C blends and PU coating to impart a finish that is durable to washing and dry-cleaning. Specifications: 1) Appearance: clear highly viscous liquid 2) Color number: 100 max. 3) Phosphorus (Wt%): 20.5% min. 4) Acid Number (mg, KOH/g): 15 max. 5) Density (g/cc at 25deg;C): 1.21.3 6) Viscosity at 20°C (Cps): 150,000 max. 7) Flash point: 165°C 8) DMMP assay (Wt%): 0.5% max. 9) TMPP assay (Wt%): 0.5% max. 10) Durable to washing times: 50 times min. Properties: 1) High heat stability and good retain of hand feel and drape after processing 2) Low volatility and good compatibility to major polymer 3) Little discoloration after treatment 4) High durability to washing and good retain of color brightness 5) Non-toxicity and high safety Typical application process: 1) Treatment of polyester fabric and T/C blends a) Recommendatory formulation: i) Flame retardant: 6 - 15kg ii) Added water, 20kg: stirred evenly iii) Added 20% conc. Na2HPO4 or Na2CO3: 4 - 8kg pH is buffered to 5.5 - 6.5 or 25% conc. aqua ammonia iv) Added penetrating agent: 0.05 - 0.2kg mixed evenly v) Additional water: diluted by water to 100kg b) Procedure: i) Fabric for treatment with flame retardant should be clean and absorbent. Starch and other sizes should be removed before processing ii) Fabric shall be treated by padding, dipping according to fabric composition, weight and construction iii) 120 - 140°C x 60sec., pre-drying iv) High temperature thermo-fixation process v) Cooling, rolling up the treated fabric. To improve the hand feel, fabric can be cleaned again if necessary to remove the un-affixed flame retardant on the fabric 2) Coating treatment of polyester fabric and PU fabric a) The formulation is dried and cured in a single pass at 150°C for 120 seconds b) The formulation is buffered to pH 5 using sodium carbonate. The added amount of soda ash is about 0.4% Attention: The information of our products is for reference only. We are not responsible for any unexpected results or patent dispute caused by it
[Related Categories: Chemicals Agents ]
[Related Keywords: Flame, Retardant, agent, (LISIDE, CU), Flame, Retardant, agent, LISIDE ]
advertisements
Nucleating Agent Nucleating Agent
Specifications: Clarifying Agent BT-9803 is designed and produced by our own company with adopting world advanced technology. BT-9803 can not only reduce the haze of polypropylene, but also evidently improve transparency, luster and mechanical properties.Clarifying Agent BT-9803 is used in improving the performance of plastical products for polypropylene homopolymer and random copolymer as well as processing conditions. BT-9803 is applied in food packing, medical appliance, cultural article for use, clarifying wrapper and other high grade tableware. Payment Terms: L/C
[Related Categories: Chemical Reagent ]
[Related Keywords: Nucleating, agent, Nucleating, agent ]
Nucleating Agent Nucleating Agent
Specifications: Clarifying Agent BT-9803 is designed and produced by our own company with adopting world advanced technology. BT-9803 can not only reduce the haze of polypropylene, but also evidently improve transparency, luster and mechanical properties.Clarifying Agent BT-9803 is used in improving the performance of plastical products for polypropylene homopolymer and random copolymer as well as processing conditions. BT-9803 is applied in food packing, medical appliance, cultural article for use, clarifying wrapper and other high grade tableware. Payment Terms: L/C
[Related Categories: Chemical Reagent ]
[Related Keywords: Nucleating, agent, Nucleating, agent ]
advertisements
Nucleating Agent CH-3 Nucleating Agent CH-3
Specifications: 1) Description: third generation nucleating agent, similar to Millad 3988 2) Appearance: white powder 3) Odor: odorless 4) Water: 0.5% max. 5) Melting point: 250oC min. 6) Particle size: 100% thru 325 mesh 7) Usage: nucleating agent for polypropylene Packing: 10kg/carton
[Related Categories: Chemical Reagent ]
[Related Keywords: Nucleating, agent, CH-3, Nucleating, agent ]
Nucleating Agent CH-3 Nucleating Agent CH-3
Specifications: 1) Description: third generation nucleating agent, similar to Millad 3988 2) Appearance: white powder 3) Odor: odorless 4) Water: 0.5% max. 5) Melting point: 250oC min. 6) Particle size: 100% thru 325 mesh 7) Usage: nucleating agent for polypropylene Packing: 10kg/carton
[Related Categories: Chemical Reagent ]
[Related Keywords: Nucleating, agent, CH-3, Nucleating, agent ]
advertisements
Silane Coupling Agent Si-69 Silane Coupling Agent Si-69
Specifications: Product Name: Silane Coupling Agent (Si-69); Chemical Name: Bis-(3- triethoxysilyl propyl)-tetrasulfide; Molecular Formula: (C2H5O)3-Si-(CH2)3-S4-(CH2)3-Si-(C2H5O)3 Molecular Weight:538.96 CAS Number:40372-72-3 Type Name: FC-SI69-L Appearance: Clear or light yellow liquid Sulfur Content: Min. Normal Tyre:20%; Radial Tyre:22% Density (20 C):1.07-1.12 g/cm3 Flaming Point: Min.100 C Packaging:20/25/50kg per polyethylene barrel. Storage: In a low temperature and dry condition, keeping away from heat. The proper storage time is in 12 months.
[Related Categories: Chemical Reagent ]
[Related Keywords: Silane, coupling, agent, Si-69, Silane, coupling, agent ]
Silane Coupling Agent Si-69 Silane Coupling Agent Si-69
Specifications: Product Name: Silane Coupling Agent (Si-69); Chemical Name: Bis-(3- triethoxysilyl propyl)-tetrasulfide; Molecular Formula: (C2H5O)3-Si-(CH2)3-S4-(CH2)3-Si-(C2H5O)3 Molecular Weight:538.96 CAS Number:40372-72-3 Type Name: FC-SI69-L Appearance: Clear or light yellow liquid Sulfur Content: Min. Normal Tyre:20%; Radial Tyre:22% Density (20 C):1.07-1.12 g/cm3 Flaming Point: Min.100 C Packaging:20/25/50kg per polyethylene barrel. Storage: In a low temperature and dry condition, keeping away from heat. The proper storage time is in 12 months.
[Related Categories: Chemical Reagent ]
[Related Keywords: Silane, coupling, agent, Si-69, Silane, coupling, agent ]
advertisements
Brake Pad Release Agent Brake Pad Release Agent
Specifications: (1) Technical index: A. Light yellow liquid B. PH=7 C. Density approximately is 1 (2) Application: Brake pad, clutch facing (3) Feature: A. Ennocuous, non-inflammable and watercraft environmental product B. Easy to release, not affect next working procedure, with smooth and bright surface C. Dilute ratio: Be diluted to 15 times with water (4) Package specification:20kg/200kg metal pail
[Related Categories: Chemical Reagent ]
[Related Keywords: Brake, pad, release, agent, Brake, pad, release, agent ]
Brake Pad Release Agent Brake Pad Release Agent
Specifications: (1) Technical index: A. Light yellow liquid B. PH=7 C. Density approximately is 1 (2) Application: Brake pad, clutch facing (3) Feature: A. Ennocuous, non-inflammable and watercraft environmental product B. Easy to release, not affect next working procedure, with smooth and bright surface C. Dilute ratio: Be diluted to 15 times with water (4) Package specification:20kg/200kg metal pail
[Related Categories: Chemical Reagent ]
[Related Keywords: Brake, pad, release, agent, Brake, pad, release, agent ]
advertisements
Dye Retarding Agent Dye Retarding Agent
Features: 1) Good dye retarding effect, no effect on dyeing chromaticity 2) Good penetrability 3) Excellent redyeing property FORLAND Other Price Terms: FOB, CIF, CFR Payment Terms: L/C, T/TSupply Ability: 60MT/month
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: dye, retarding, agent, dye, retarding, agent ]
Dye Retarding Agent Dye Retarding Agent
Features: 1) Good dye retarding effect, no effect on dyeing chromaticity 2) Good penetrability 3) Excellent redyeing property FORLAND Other Price Terms: FOB, CIF, CFR Payment Terms: L/C, T/TSupply Ability: 60MT/month
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: dye, retarding, agent, dye, retarding, agent ]
advertisements
Chelating Agent Chelating Agent
Features: 1) Strong property of chelating 2) Promotes leveling and fastness to light 3) Low foamy FORLAND Other Price Terms: FOB, CIF, CFR Payment Terms: L/C, T/TSupply Ability: 120MT/month
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: chelating, agent, chelating, agent ]
Chelating Agent Chelating Agent
Features: 1) Strong property of chelating 2) Promotes leveling and fastness to light 3) Low foamy FORLAND Other Price Terms: FOB, CIF, CFR Payment Terms: L/C, T/TSupply Ability: 120MT/month
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: chelating, agent, chelating, agent ]
advertisements
Leveling Agent Leveling Agent
Features: 1) God dyeing delaying and migration properties 2) Improves redyeing effect, brings softer handle but doesn't reduce color yield FORLAND Other Price Terms: FOB, CIF, CFR Payment Terms: L/C, T/TSupply Ability: 60MT/month
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: leveling, agent, leveling, agent ]
Leveling Agent Leveling Agent
Features: 1) God dyeing delaying and migration properties 2) Improves redyeing effect, brings softer handle but doesn't reduce color yield FORLAND Other Price Terms: FOB, CIF, CFR Payment Terms: L/C, T/TSupply Ability: 60MT/month
[Related Categories: Chemical Additives, Auxiliary ]
[Related Keywords: leveling, agent, leveling, agent ]
1 2 3 4 5 6 7 8 9 10  >> 
Scroll